Materials

From Hyrel3D
Revision as of 13:02, 28 April 2015 by Admin (talk | contribs)
Jump to navigation Jump to search

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder HotHead (°C) Fan Speed HotBed (°C) Steps / nl Verified?
ABS MK-1 ~225 30% 60 0.085 yes
PLA MK-1 ~200 30% 60 0.085 yes
PlastInk Rubber MK-1 ~225 30% 60 0.085 yes
NinjaFlex MK-1 ~225 30% 60 0.085 yes
Nylon MK-1 ~225 30% 60 0.085 yes
T-Glaze MK-1 ~225 30% 60 0.085 yes
BendLay MK-1 ~225 30% 60 0.085 no
LayBrick MK-1 ~225 30% 60 0.085 no
LayWoo-d3 MK-1 ~225 30% 60 0.085 yes
PET MK-1 ~225 30% 60 0.085 no
PVA MK-1 ~225 30% 60 0.085 no
Clay EMO-25 n/a n/a n/a *varies yes
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a *varies yes
Porcelain EMO-25 n/a n/a n/a *varies yes
Plasticine EMO-25 n/a n/a n/a *varies yes
Plah-Doh EMO-25 n/a n/a n/a *varies yes
Sculpey EMO-25 n/a n/a n/a *varies yes
Sugru EMO-25 n/a n/a n/a *varies yes
RTV Silicone EMO-25 n/a n/a n/a *varies yes