Materials

From Hyrel3D
Jump to navigation Jump to search

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder HotHead (°C) Fan Speed HotBed (°C) Steps / nl Verified?
ABS MK1-250 ~225 30% 60 0.78 yes
PLA MK1-250 ~200 30% 60 0.78 yes
PlastInk Rubber MK1-250 ~225 30% 60 0.78 yes
NinjaFlex MK1-250 ~225 30% 60 0.78 yes
Nylon MK1-250 ~225 30% 60 0.78 yes
T-Glaze MK1-250 ~225 30% 60 0.78 yes
BendLay MK1-250 ~225 30% 60 0.78 no
LayBrick MK1-250 ~225 30% 60 0.78 no
LayWoo-d3 MK1-250 ~225 30% 60 0.78 yes
PET MK1-250 ~225 30% 60 0.78 no
PVA MK1-250 ~225 30% 60 0.78 no
Clay EMO-25 n/a n/a n/a *varies yes
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a *varies yes
Porcelain EMO-25 n/a n/a n/a *varies yes
Plasticine EMO-25 n/a n/a n/a *varies yes
Plah-Doh EMO-25 n/a n/a n/a *varies yes
Sculpey EMO-25 n/a n/a n/a *varies yes
Sugru EMO-25 n/a n/a n/a *varies yes
RTV Silicone EMO-25 n/a n/a n/a *varies yes