Instructions
Here are some step by step instructions for learning how to use your Hyrel 3D Printer.
Also, please see the Videos page.
Unboxing Your Printer
Video: https://www.youtube.com/watch?v=bHxC2__DPsM
Basic Printing
First Print PDF: http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf
Trammig your bed
a. For the current printers: https://www.youtube.com/watch?v=lK_x0M8p9Ew
b. For the older printers: https://www.youtube.com/watch?v=soY9uOw3nCM
Loading your material
a. MK1-250 for 1.75mm filaments: http://youtu.be/Llas80vYFPc
b. EMO-25 for emulsifiables (pastes): https://www.youtube.com/watch?v=4yuzpUqeE-Y
Setting your Z-Zero position
Video: http://youtu.be/ArDX4UpflmE
Your First Print
a. MK1-250 for 1.75mm filaments: https://www.youtube.com/watch?v=Fg9omXlYR-Q
b. EMO-25 for emulsifiables (pastes): http://youtu.be/tLHpaePTP-k
Intermediate Printing
Intermediate Print PDF: http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf
Z Level Adjustment for Dual Heads
Video: https://www.youtube.com/watch?v=IQscrgv6uaQ
Parallel Print with Dual Heads
In the works...
Parallel Calibration Marking with Dual Heads
In the works...
X/Y Offest Calibration for Dual Heads
In the works...
Serial Print (Zebra) for Dual Heads
In the works...
Serial Print (Support Material) for Dual Heads
In the works...
Serial Print (Ping Pong) for Dual Heads
In the works...
Advanced Printing
Advanced Print PDF: (to link from here)
Videos:
(work in progress)
Troubleshooting and Maintenance
A. Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths
B. Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ
C. Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
D. Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho
E. Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
F. Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUIa
G. Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o