Videos
There be videos here.
Please also see the Instructions page.
Product Features
- Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
- Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
- Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
- Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
- Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
- Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
- Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
- Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
- Introducing the Shark5 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
- Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
- Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
- Introductin Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ
Print Material
- Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
- Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
- Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
- Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg
- Testing the Shark5 Laser: https://www.youtube.com/watch?v=yEePz8_0ttc
- Part Printed in NinjaFlex: https://www.youtube.com/watch?v=KJ76lRfpOJ4
Instructions
Here are some basic instructions; a more structured presentation can bee seen at the Instructions page.
- Tramming the heated build platform: https://www.youtube.com/watch?v=soY9uOw3nCM
- NEW Unboxing the System 30: https://www.youtube.com/watch?v=bHxC2__DPsM
- Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
- Setting up custom gcode: https://www.youtube.com/watch?v=tIAQT0SBR-g
- Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
- Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
- Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
- MK1 Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
- EMO Series Printing Tips: https://www.youtube.com/watch?v=tLHpaePTP-k
- Manually Setting the Z-Zero Position: https://www.youtube.com/watch?v=ArDX4UpflmE
- Updating your Slic3r Recipes: https://www.youtube.com/watch?v=A0I6Xu9Tlvc
- Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
Product Maintenance
While we strive to be perfect, we're not there yet. Here are some instructional videos for adjustments and maintenance that some users have had to perform:
- Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths
- Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ
- Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
- Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho
- Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
- Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
- Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
- Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
- Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
- Tapping the Flagpole: https://www.youtube.com/watch?v=iULf6s8UIzw
- Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
- Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8