Downloads

From Hyrel3D
Revision as of 19:06, 23 May 2018 by Davo (talk | contribs)
Jump to navigation Jump to search

The Downloads page has been reorganizde. Please see one of the following pages:


For all versions
Drivers for installing drivers (for all versions)
For version 2.x
2 Install for a new install of the current version 2.865
2-2 Upgrade to upgrade an older (version 1.x or 2.x) install to the last version 2.865
For version 3.x
2-3 Install to upgrade an older (version 1.x or 2.x) install to the current version 3.x
3 Install for a new install of the current version 3x
3-3 Upgrade to upgrade an older version 3.x install to the current version 3.x
For all versions
Installing Elsewhere for instructions to install Repetrel on another Windows machine
Firmware for flashing firmware (for all versions)
For version 3.x
Settings for the proper Printer Settings for your model (for version 3.x)


Note: the order above is the order in which these steps should be performed.

Note: there have been some machines (less than 5%) which simply will not run everything we need.