Filaments

From Hyrel3D
Revision as of 13:28, 8 December 2015 by Davo (talk | contribs)
Jump to navigation Jump to search
Settings: MK1-250: MK1-350/400:
Material
Type (any) (any)
Color (any) (any)
Nozzle 0.500 0.500
Layer (any) (any)
Temp Info
Print Temp 240 410
Power Factor 100 100
Minimum (any) (any)
Maximum (any) (any)
Overrides
Pulses 0.78 0.78
Feed Rate % 1.000 1.000
Prime
Steps 250 250
Rate 10,000 10,000
Dwell Time (ms) 50 50
Before Tool Change 1 1
Unprime
Steps 250 250
Rate 10,000 10,000
Dwell Time (ms) 60 60
After Tool Change 1 1
Offsets
Clone Head Off Off
X 0,000 0,000
Y 0,000 0,000
Z 0,000 0,000
Head Info
Model 250 250
RTD Type 1 Meg 1 Meg
Motor Current High High
Step Mode Sixteenth Sixteenth