Videos

Table of Videos

Please also see:

The Instructions page
The Help page
The FAQs page
The How_do_I... page

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

Note:

The following chart compares and contrasts the various printers:

https://hyrel3d.com/wiki/index.php/Printer_Overview

The following chart compares and contrasts the various heads:

https://hyrel3d.com/wiki/index.php/Head_Overview

Count

299 videos as of June 2024.

Table of Video Links, 2024
Video Link	Subject	Printer Model	Head / Activity
200px	Setting up the Hyrel 3D H21 to print PEI (Ultem) in the Heated Chamber (up to 150C)	H21	FH2-450
	Printing with 4th Axis (lathe-style) movement	H21	Any
	Hyrel V4 Install No. 9: Licensing	All	All
200px	DXF to Gcode for Hyrel 3D Inkjet Head	Any	Inkjet
200px	Tuskegee Hydra 21 Setup	H21	FH2-260
200px	Tuskegee University prints on Hydra 21	H21	FH2-260
200px	Surface Mapping Configuration on Hyrel 3D Software	H21	Probe
200px	Slicing a DXF to etch with a Hyrel 3D Diode Laser	Any	Lasers
200px	Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup	Any	Reservoir
200px	Hyrel 3D: Dual RSD instructions	Any	Reservoir

279 videos as of Oct 2022

2023 (1)

Table of Video Links, 2021
Video Link	Subject	Printer Model	Head / Activity
200px	New-style Pick-and-Place Head Introduction	H21	PNP

2022 (23)

Table of Video Links, 2021
Video Link	Subject	Printer Model	Head / Activity
200px	Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia	EHR	Printing
200px	Additional Setup for new printers	All	n/a
200px	Technical University of Denmark printing on a Hyrel 3D Printer	ESR	Printing
200px	Creating Text Objects with Repetrel	All	n/a
200px	New Small Volume Mixing Kit	Any	SVMK, Microfluidics
200px	Integrating MATLAB with Repetrel	Any	Any
200px	Adjusting to avoid Elephant Foot with PCL and similar materials	Any	KR2, TAM
200px	Hyrel head lowering attachment	Any	Any
200px	Cleaning residue from the HIgh Torque KR2 cartridge	Any	HTK
200px	Scaling your print with the Hyrel Microscope	Any	Microscope
200px	Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head.	Any	Cleanup
200px	Using head offsets to change tool positions while leaving the output in the same location	Any	Calibration
200px	Demo setup and test: Pick-and-Place	H21	Configuration
200px	EHR Position Adjustment	EHR	Calibration
200px	Analyzing and calculating the porosity of scaffolds - Hyrel 3D	Any	Scaffolds
200px	Replacing big tree board on Z motor on Hydra 21.	H21	Maintenance
200px	How to prepare powdered material for use in Hyrel 3D's heated syringe heads.	All	Bio
200px	How to level the build platform on the new Hyrel 3D Hydra 21 printer.	H21	Maintenance
200px	How to measure the scale of biological scaffold prints.	All	Bio
200px	How to melt and print with PCL pellets with the Hyrel KR2 head.	All	Bio
200px	How to remove PCL scaffolds from PVC build surface.	All	Bio
200px	Hydra 21 Unboxing Instructions	H21	All
200px	Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool	All	All

2021 (44)

Table of Video Links, 2020
Video Link	Subject	Printer Model	Head / Activity
200px	Scaffolds: Adjusting the flow value (P/uL)	All	All
200px	Scaffolds: Adjusting the final retract (unprime)	All	All
200px	Scaffold Gradient: Speed and Z position Instructions	All	All
200px	Scaffold Gradient: Speed Instructions	All	All
200px	Scaffold Perimeters Tool	All	All
200px	Customizing Visualization in Repetrel	All	All
200px	Biogel Scaffold Speed Test	All	All
200px	Programming BigTree Drivers for Hyrel Printers	All	Flashing
200px	Using a USB Camera with Repetrel	All	Camera
200px	Heated Nozzle Accessory	All	Reservoirs
200px	Scaffold Options in Repetrel	All	All
200px	Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head	All	Reservoir
200px	Calibrating Head Offsets for Hyrel 3D	All	All
200px	Hyrel 3D "Return Trip" Option for Scaffolds	All	Zebra Prints
200px	Hyrel 3D Viscosity Test Clean Up	All	Reservoir
200px	Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater	All	Reservoir
	Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers	All	Zebra Prints
	Designing Scaffolds in Repetrel	All	Scaffolds
	Resolving a stuck plunger in a Hyrel 3D reservoir head	All	Reservoir
	Hyrel 3D Announces Polar Printing for Extreme Environments!	Polar	All
	Eliminating air bubbles in a Hydrogel	All	Reservoir
	Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head	All	DMH-2
	How to echo gcode commands to the display	All	Usage
	Removing PCL Prints Faster and Easier	All	PCL
	Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan	All	Quiet Storm
	Preparation and Setup for Printing PCL (polycaprolactone)	All	PCL
	Choosing and Specifying Parameters for Rectangular Infill Scaffolds	All	Scaffolds
	Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds	All	Scaffolds
	Showing the Effects of Cooling while Printing	All	Cooling
	How to manage Accessory Manuals in Repetrel	All	Usage
	Saving, Naming and Reusing Scaffolds	All	Scaffolds
	How to work with our Heated Nozzle Accessory	All	Heated Nozzles
	Using Filters to refine SurferBuddy search results	All	SurferBuddy
	How to Export SurferBuddy Files to External Drive 1	All	SurferBuddy
	Using Parameter Profiles in Repetrel	All	Parameter Profiles
	How to Export GCODE from Repetrel	All	Usage
	Using offsets to repeat a job in different locations	All	Offsets
	Custom screeding attachment for the Hyrel Hydra	16A	Calibration
	Hyrel Nozzle Heater for Reservoir Heads	All	Reservoir
	Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW)	EHR	Setup
	Calibrating Travel on the EHR	EHR	Calibration
	Unpacking and Setting Up the EHR	EHR	Setup
	How to check if your CO2 Laser is working	Hydra	Lasers
	Etching Aluminum with 450 nm Diode Laser	any	Lasers
	Heated and Chilled Vacuum Bed (HCVB)	EHR, 16A	Reservoir

2020 (30)

Table of Video Links, 2020
Subject	Printer Model	Head / Activity
The Hyrel Hydra Electrical Panel, Explained	16A	Overview
Making DXFs from Camera Images	All	Lasers
Viscotec Vipro HEAD-3 on Hyrel	All	Viscotec
Explaining the NEW RSD-30	All	Reservoirs
Making DXFs from CAD Models	All	Lasers
4th/5th Axis Installation and Setup	16A	All
3-Phase Spindle Tool Installation and Setup	16A	Spindles
Clench/Pinch Valve Installation and Setup	All	Reservoirs
Dynamic Mixing Head (DMH) Installation and Setup	All	Reservoirs
EHR Electronics Access	EHR	Overview
ESR Unboxing and Setup	ESR	Setup
RSD-30 Refrigerated Syringe Dispenser	All	Reservoirs
Printing on PEI	All	Filaments
Printing Cememtitious Materials at TN Tech	All	Reservoirs
Tightening set screws for Hydra X-axis	16A	Maintenance
Interview on GA Mfg News	All	All
Hyrel V4 Install No. 9: Licensing	All	All
Hyrel V4 Install No. 8: Recipes	All	All
Hyrel V4 Install No. 7: Settings	All	All
Hyrel V4 Install No. 6`: Firmware	All	All
Hyrel V4 Install No. 5: Drivers	All	All
Hyrel V4 Install No. 4: Repetrel	All	All
Hyrel V4 Install No. 3: Adobe Reader	All	All
Hyrel V4 Install No. 2: Ecosystem Apps	All	All
Hyrel V4 Install No. 1: Winrar	All	All
Hydra 16AT - Tall	16A	All
Hyrel Bulk Feeder for Cementitious Materials	16A	Reservoirs
Using the new Precision Tool Setter on a Hyrel 3D Printer	16A	All
How to Dial In the Prime and Unprime Settings	All	All
Installing a Second Yoke on a Hyrel Hydra	16A	All

2019 (21)

Table of Video Links, 2019
Subject	Printer Model	Head / Activity
RSD-30 - Refrigerated Syringe Dispenser	All	Reservoirs
Heated & Chilled Vacuum Bed	16A, EHR	Reservoirs
4th Axis Fun - Linear and Rotary Printing	16A	All
CO2 Laser - Installation Instructions	16A	Lasers
Dynamic Mixing Head DMH	All	Reservoirs
Configuring Prusa Slicer for Multi-Material Support	All	Filaments
Configuring the Prusa Slicer for Breakaway Support Material	All	Filaments
How to Load Filament into a Hyrel 3D Print Head	All	Filaments
Loading Print Heads into your Hyrel 3D Printer	All	All
How to Calibrate the Z-Zero Position	16A, 30M, ESR	All
Revised 2019: Hyrel 30M Initial Setup	30M	All
How to select a Build Surface	All	Filaments
How to Tram (level) the Hydra Bed	16A	All
Laser Marking on a Cylinder	All	Lasers
Five Axis Machining in Brass on a Hyrel Hydra	16A	Spindle
Configuring your Hydra for a 3-phase Spindle Tool	16A	Spindle
Five Axis Machining on a Hyrel Hydra (this gcode was used)	16A	Spindle
Dispensing RTV Silicone on a Hyrel Hydra	All	Reservoirs
Machining PTFE (Teflon) on a Hyrel Hydra	16A	Spindle
Rotating Head Prototype	16A	Filaments
Re-aligning the Gantry on the Hyrel Hydra 16A	16A	All

2018 (12)

Table of Video Links, 2018
Subject	Printer Model	Head / Activity
Installing the new laser Power Supply in a Hyrel Hydra	16A	All
Hyrel Tapping Enabled	16A	Spindle
Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra	16A	Spindle
Improved UV Light Source for more Powerful Crosslinking	All	Reservoirs
How to install 4th and 5th Axes on a Hyrel Hydra	16A	All
How to use an additional Yoke on a Hyrel Hydra	16A	All
How to install an additional Yoke on a Hyrel Hydra	16A	All
The Filament Dryer	All	Filaments
Fourth and Fifth Axes Demo on a Hyrel Hydra	16A	All
Installing a fourth axis on a Hyrel Hydra	16A	All
Machining hotbeds to under 0.001"	16A	All
Setting the Z-Offset on the EHR	EHR	All

2017 (45)

Table of Video Links, 2017
Subject	Printer Model	Head / Activity
CO2 Laser Marking with the Hydra	16A	Lasers
Converting a Hydra from Printer to Laser	16A	Lasers
Cutting Nylon Mesh with CO2 Laser on a Hydra	16A	Lasers
Chamber Temperature in a Cold Room	16A	Filaments
Cutting acrylic with the CO2 Laser	16A	Lasers
Tiny Heated Chilled Bed Preview	EHR	Reservoirs
Fourth Axis Rotary Print	16A	Filaments
Additive Manufacturing of Toroid Inductor for Electronics Applications	30M, ESR	Reservoirs
Hyrel Hydra X and Y Belt Tension Adjustments	16A	Maintenance
Hyrel Hydra Linear Bearing Adjustments	16A	Maintenance
Hyrel Hydra Z Belt Tension Adjustments	16A	Maintenance
Changing the Address Resistor on the CO2 Laser	16A	Maintenance
CO2 Laser Alignment	16A	Calibration
Hydra Yoke Adjustment	16A	Maintenance
Hydra Yoke Angle Adjustment	16A	Maintenance
Engnie, High Resolution (EHR) Setup, Part 2	EHR	Setup
Engnie, High Resolution (EHR) Setup, Part 1	EHR	Setup
EHR Scaffold Instructions	EHR	Setup
EHR Scaffold Intro	EHR	Setup
Unclogging a rare clogged MK1-250	All	Filaments
Unclogging a rare clogged MK1-450	All	Filaments
Flashing Firmware on the Modified CO2 Laser Controller	16A	Maintenance
The Hyrel Hydra Family	16A	All
High Resolution Engine Vacuum Bed	EHR	Reservoirs
High Resolution Engine Setup	EHR	Setup
SDS Clench Valve Assembly Instructions	All	Reservoirs
How to Load the SDS Clench Valve	All	Reservoirs
EHR Accuracy Test	EHR	Calibration
Hydra 16A Controls Overview	16A	All
Using Low Temperature Solder Paste to connect a Flat Flex Cable	30M, ESR	Assembly
Draining Laser Coolant on the Hyrel Hydra	16A	Lasers
Hydra Home Calibration Details	16A	Calibration
Replacing the top component on an SDS Head Assembly	16A	Setup
HYDRA Hot Bed Installation	16A	Setup
Hydra Model Startup	All	Reservoirs
Unboxing the Hydra Floor Model Units	16A	Setup
Hydra Overview by CTO Karl Gifford	16A	All
How to Manage the Pick-and-Place with Repetrel Software	16A	Pick-and-Place
Hyrel Hydra Versitility	16A	All
Hydra Vinyl Cutter Overview	16A	Cutting
Hyrel 3D Hydra Pick-and-Place Introduction	16A	Pick-and-Place
The Hyrel3D Hydra Line	16A	All
Tramming the bed on the 16A	16A	Maintenance
The Benefits of Microscope Inspection During Printing	All	Microscopes
Printing PLGA for internal Biological Applications	All	Reservoirs

2016 (60)

Table of Video Links, 2016
Subject	Printer Model	Head / Activity
Varialble Width Conductive Paste Extrusion	Any	Reservoirs
Microscope Print View Setup	Any	Microscope
Replacing the LED Strip	30M	Maintenance
Replacing the Front Switch Panel	30M	Maintenance
Static Mixing Head (SMH) Explained - v2 Including SDS Heads	Any	Reservoirs
Hot Bed Manufacturing	Hydra	Manufacturing
Static Mixing Head (SMH) Explained	Any	Reservoirs
Timelapse Recording	Any	Recording
HotHead LEDs Explained	Any	Any
LA6-450 and LA5-808 Laser Overview	Any	Lasers
SDS and CSD Overview	Any	Reservoirs
Quiet Storm Cooling Fan Overview	Any	Filaments
VOL-25 and VCD-25 Overview	Any	Reservoirs
KRA-15 and KCD-15 Overview	Any	Reservoirs
Hydra 640 (16A) Two Part Test Print	Hydra	Filaments
Extrusion Prototype Print	Any	Filaments
EMO-25 and COD-25 Overview	Any	Reservoirs
Session 3C Slicing for Multiple Head Support	Any	Slicing
Session 3A - Setting Two Heads to Z-Zero	Any	Setup
Session 3B - Calibrating the Offset Between Two Heads	Any	Setup
Session 2D - Editing Slic3r Recipes	Any	Slicing
Session 2E - Slicing your STL and Viewing your GCODE	Any	Slicing
Session 2C - Positioning, Scaling, and Rotating your STL	Any	Slicing
Session 1A - Hardware and Software Overview	Any	Overview
Session 1B - Communications and Bed Leveling	30M, ESR	Setup
Session 1C - Printing with Plasticine	Any	Reservoirs
Session 2A: Simple CAD Modeling in FreeCAD	Any	Software
PC to Printer Connectivity	Any	Setup
Using the Spindle Tool to rework Circuit Boards	Any	Spindle
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software	n/a	Manufacturing
Table Arm (X-Arm) Block Adjustment	30M, ESR	Maintenance
MK1-250 Overview	Any	Filaments
MK1-450 Overview	Any	Filaments
MK2-250 Overview	Any	Filaments
Replacing the 30M/ESR Heated Build Platform	30M, ESR	Maintenance
Multi Head Printing - Nested STLs	Any	Software
X-Axis Belt Tightening	30M, ESR	Maintenance
Y-Axis Belt Tightening	30M, ESR	Maintenance
Plasma Magnetic Vortex Deposition (ElectroSpinning)	EHR	Electro (Melt) Spinning
3D Milling on the Hydra Series	Hydra	Spindle
Introducing the Hydra 640 (formerly Model 16A)	Hydra	Overview
USBB Jumper Instructions	Any	Setup
Size Does Matter	Hydra	Overview
Print Heads Overview	Any	All
Session 2F - Loading and Printing with Filaments, MK-Series Heads	Any	Filaments
MK1-250 PEEK Nozzle Assembly	Any	Filaments
New Hydra Printer Line Intro	Hydra	Overview
Bioplotting for under $10K	EHR	Introduction
Programming Head Offsets	Any	Setup
Slicing for a Two-Material Print	Any	Slicing
Loading Filament and Printing with the Hyrel3D MK2-250	Any	Filaments
Loading Filament and Printing with the Hyrel3D MK1-250	Any	Filaments
Loading and Printing with the EMO-25 Print Head	Any	Reservoirs
SDS RTV Instructions, v2	Any	Reservoirs
Intro to Hyrel Possibilities - Jan 2016	All	Overview
MK2-250 Dual Drive for Flexible Filaments	Any	Filaments
6w, 450nm Laser Test	Any	Lasers
SDS RTV Instructions, v1	Any	Reservoirs
Introducing the SDS Print Heads	Any	SDS
Sneak Peek: Pick and Place Prototype	Hydra	Pick-and-Place

2012-2015 (42)

Table of Video Links, 2012-2015
Subject	Printer Model	Head / Activity
LA6-450: 6w, 450nm Diode Laser Head	Any	Lasers
3D Printing RTV Silicone	Any	Reservoirs
Loading the VCD-25	Any	Reservoirs
Short Porcelain Print Demo	Any	Reservoirs
Replacing the Tablet Interface Board	30M	Maintenance
2016 Design Contest Video	N/A	Contest
DXF to Laser Gcode Generation	Any	Setup
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)	Any	Filaments
Healing with MeshLab	Any	Setup
Postprocessing with a Heat Gun	Any	Postprocessing
Introduction to Hyrel 3D Possibilities, 2015	All	All
Updating to Repetrel 2 4xx	Any	Software
Updating your 407 Motion Controller	All	Software
Replacing the HOTHEAD controller	Any	Any
Programming the HOTBED controller on the System 30M and ESR	30M, ESR	Software
Printing with Cloning - three heads in Parallel	Any	Any
Older Instructions, Slicing for Multiple Head Support	printer	head
Leveling the X-Arm on System 30M, Engine SR	30M, ESR	Maintenance
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR	30M, ESR	Maintenance
Manually Setting the Z-Zero Position	Any	Setup
Picking Right 3D Printer For You	All	All
Changing the Main I/O Board, System 30M, ESR	30M, ESR	Maintenance
Laser Test Print	Any	Lasers
EMO Series Printing Tips	Any	Reservoirs
Changing Power Supplies in the 30M and ESR	30M, ESR	Maintenance
Multi-Head Calibration Guide	Any	Setup
LA5-808 "Shark V" Diode Laser	Any	Lasers
Luer Tip Kit for EMO and SDS Series Print Heads	Any	Reservoirs
Print Head SDK	Any	New!
MK Series Printing Tips	Any	Filaments
Replacing fuses (old) on the Yoke	Any	Maintenance
Loading the EMO-type Reservoirs	Any	Reservoirs
Changing the Economics of 3D Printing	Any	Any
System 30M Product Release	30M	Introduction
Simultaneous 3D Printing of Multiple Parts	Any	Any
3D Printing with Sugru The Amazing Self-Setting Rubber	Any	Reservoirs
3D Printing with Play-Doh	Any	Reservoirs
3D Printing with Plasticine	Any	Reservoirs
3D Printing with Air-Dry Modeling Clay	Any	Reservoirs
Interchangeable Hot-Swappable Heads	Any	Any
Thank you, Kickstarters!	Any	Any
Quick Tour of our Main Shop!	Any	Any