Videos

There be videos here.

Please also see the Instructions page.

Product Features

Intro to Hyrel 3D Possiblilities, Jan 2016: https://www.youtube.com/watch?v=MwrhV74NjCQ
Selecting the Right Printer: https://www.youtube.com/watch?v=vc9gBZtUL7c
Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
Introducing the Shark5 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
Introducing Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ
Sneak Peek: Pick and Place Head: https://www.youtube.com/watch?v=BlSGlOpyipI
Introducing the SDS Syringe Heads: https://www.youtube.com/watch?v=XKHa1CXnSdI
Introducing the LA6-450 Laser (6w, 450nm): https://www.youtube.com/watch?v=O1IGa-8y9yQ
Introducing the MK2-250 Head for Flexible Filaments: https://www.youtube.com/watch?v=V_zCytnGvvo

Print Material

Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg
Testing the Shark5 Laser: https://www.youtube.com/watch?v=yEePz8_0ttc
Part Printed in NinjaFlex: https://www.youtube.com/watch?v=KJ76lRfpOJ4
First Clay test print: https://www.youtube.com/watch?v=0gv71RAtdwg

Instructions

Here are some basic instructions; a more structured presentation can bee seen at the Instructions page.

General Information

Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30
NEW Unboxing the System 30: https://www.youtube.com/watch?v=bHxC2__DPsM
NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
Manually Setting the Z-Zero Position: https://www.youtube.com/watch?v=ArDX4UpflmE
Powering up the System: https://www.youtube.com/watch?v=h_crzan5T7Y
How to use 3D PDFs: https://www.youtube.com/watch?v=DoBqTQ_qCUY
First Print Walkthrough: https://www.youtube.com/watch?v=VNQNaz0Yzt4

Filament Specific

Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
MK1 Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
Post Processing with a Heat Gun: https://www.youtube.com/watch?v=0Aj9WCabPgw
Loading and Printing with the MK1-250: https://www.youtube.com/watch?v=v2ifSlZ0qEw
Alternate Method of Loading Flexible Filament into the MK1-250: https://www.youtube.com/watch?v=lxCQ6GnTdhk
Loading and Printing with the MK2-250: https://www.youtube.com/watch?v=0dS3bC0BnRQ

Emulsifiable Specific

Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY
EMO Series Printing Tips: https://www.youtube.com/watch?v=tLHpaePTP-k
Loading the VCD Head: https://www.youtube.com/watch?v=YWe3TQGgNW0
Loading the SDS Head: https://www.youtube.com/watch?v=0JJp7HeK35M
Loading the SDS Head with RTV: https://www.youtube.com/watch?v=ej55bZXrltA
Loading and Printing with the EMO-25: https://www.youtube.com/watch?v=q-DbAbNMW48

GCode, Modeling and Slicing

Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
Intro to FreeCad: https://www.youtube.com/watch?v=2yHRuef29L4
Healing with MeshLab: https://www.youtube.com/watch?v=eLGIRAgLz4w
DXF to GCODE for the Laser: https://youtu.be/YRsyEGHyt3k
Adding DavoPads (FrogToes/PrintStamps) to Anchor Large Prints: https://www.youtube.com/watch?v=zgcggw5BglA

Maintenance and Tuning

NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
To replace your Tablet Interface Board; also to run from an external PC (start at 6:24): https://youtu.be/b583I7AlGJI

Product Maintenance

While we strive to be perfect, we're not there yet. Here are some instructional videos for adjustments and maintenance that some users have had to perform:

Adjusting the X-Arm: https://youtu.be/0gFX6Mh-ths
Tightening the X Belt: https://www.youtube.com/watch?v=4GYWfMrs0F8
Adjusting the Y-Arm: https://youtu.be/LZd0ecogGlQ
Tightening the Y Belt: https://www.youtube.com/watch?v=IkgviAGep-c
Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c
Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8