Videos

Please also see the Instructions page and the Getting Started page.

Our YouTube Page.

Product Features

• Introducing the Model 16A: https://www.youtube.com/watch?v=81sVBZOOcbw
• Intro to Hyrel 3D Possiblilities, Jan 2016: https://www.youtube.com/watch?v=MwrhV74NjCQ
• Selecting the Right Printer: https://www.youtube.com/watch?v=vc9gBZtUL7c
• Intro to Hyrel 3D Possibilities: https://youtu.be/4oxCqR_DVNQ
• Printing four parts at once (ABS): https://www.youtube.com/watch?v=xQFacnpzmv0
• Printing three parts at once (ABS), with the "Clone Head" feature: https://youtu.be/cuRcIE-Jbyc
• Printing two parts at once (plasticine): https://www.youtube.com/watch?v=P6aMBQSZPgg
• Introducing the System 30: https://www.youtube.com/watch?v=c9HvQ3SepoM
• Sped-up video of the Gear Vase print: https://www.youtube.com/watch?v=DaIrESgjNSA
• Introducing the hot-swappable Print Heads: https://www.youtube.com/watch?v=XNwv7Dw_Zwg
• Introducing the Developer's Kit (SDK): https://www.youtube.com/watch?v=-VHxf182fIs
• Introducing the Shark5 Laser: https://www.youtube.com/watch?v=0lpa4nENtyQ
• Introducing the Luer Tip Kit: https://www.youtube.com/watch?v=mPYPWjnDGho
• Introducing Hyrel 2.4 and Slicing 2 stls for 2 heads: https://www.youtube.com/watch?v=VMyS3h4qiSA
• Introducing Hyrel 2.4 and Inserting new Temperature and Fan Speed gcode: https://www.youtube.com/watch?v=4REXwbuTvzQ
• Sneak Peek: Pick and Place Head: https://www.youtube.com/watch?v=BlSGlOpyipI
• Introducing the SDS Syringe Heads: https://www.youtube.com/watch?v=XKHa1CXnSdI
• Introducing the LA6-450 Laser (6w, 450nm): https://www.youtube.com/watch?v=O1IGa-8y9yQ
• Introducing the MK2-250 Head for Flexible Filaments: https://www.youtube.com/watch?v=V_zCytnGvvo
• Plasma Magnetic Vortex Deposition: https://www.youtube.com/watch?v=lQy25Nlj3_Q
• 3D Milling on the Hyrel Model 16A: https://www.youtube.com/watch?v=LQb5vS97jFo
• Bioplotting for under $10K: https://www.youtube.com/watch?v=XREWb_Md5o0

Print Material

• Printing in Sugru (Rubber): https://www.youtube.com/watch?v=nuii5rP53Js
• Printing in Air-dry Modeling Clay: https://www.youtube.com/watch?v=trdz4YDbdsw
• Printing in Plasticine: https://www.youtube.com/watch?v=cw8XiW46G0k
• Printing in Play-Doh: https://www.youtube.com/watch?v=dihvAQR7LQg
• Testing the Shark5 Laser: https://www.youtube.com/watch?v=yEePz8_0ttc
• Part Printed in NinjaFlex: https://www.youtube.com/watch?v=KJ76lRfpOJ4
• First Clay test print: https://www.youtube.com/watch?v=0gv71RAtdwg
• Model 16A Build Volume: https://www.youtube.com/watch?v=Rw2E_d-q9bQ
• Print Heads Overview, June 2016: https://www.youtube.com/watch?v=xGriCCrfkuw

Instructions

Here are some basic instructions; a more structured presentation can be seen at the Instructions page.

General Information

• Quick Start Video: https://www.youtube.com/watch?v=vtfIq4RQ6_w
• Upgrading to Repetrel 2.4xx: https://www.youtube.com/watch?v=YyXFKYpzs30
• NEW Unboxing the System 30: https://www.youtube.com/watch?v=bHxC2__DPsM
• NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
• Manually Setting the Z-Zero Position: https://www.youtube.com/watch?v=ArDX4UpflmE
• Powering up the System: https://www.youtube.com/watch?v=h_crzan5T7Y
• How to use 3D PDFs: https://www.youtube.com/watch?v=DoBqTQ_qCUY
• First Print Walkthrough: https://www.youtube.com/watch?v=VNQNaz0Yzt4
• Programming Head Offsets: https://www.youtube.com/watch?v=9zxxBYbdlOE
• Multi-Head Printing with Nested STLs: https://www.youtube.com/watch?v=3KwJ6OgOx14

Filament Specific

• Loading and Unloading Filament in the MK-1 head: http://youtu.be/Llas80vYFPc
• MK1 Series Printing Tips: https://www.youtube.com/watch?v=Fg9omXlYR-Q
• Post Processing with a Heat Gun: https://www.youtube.com/watch?v=0Aj9WCabPgw
• Loading and Printing with the MK1-250: https://www.youtube.com/watch?v=v2ifSlZ0qEw
• Alternate Method of Loading Flexible Filament into the MK1-250: https://www.youtube.com/watch?v=lxCQ6GnTdhk
• Loading and Printing with the MK2-250: https://www.youtube.com/watch?v=0dS3bC0BnRQ
• Loading Filament in the MK1-250: https://www.youtube.com/watch?v=QMyuKdgiWI4

Emulsifiable Specific

• Loading the EMO-25: https://www.youtube.com/watch?v=4yuzpUqeE-Y
• More Loading the EMO-25: https://www.youtube.com/watch?v=IEmQJxlPnuY
• EMO Series Printing Tips: https://www.youtube.com/watch?v=tLHpaePTP-k
• Loading the VCD Head: https://www.youtube.com/watch?v=YWe3TQGgNW0
• Loading the SDS Head: https://www.youtube.com/watch?v=0JJp7HeK35M
• Loading the SDS Head with RTV: https://www.youtube.com/watch?v=ej55bZXrltA
• Loading and Printing with the EMO-25: https://www.youtube.com/watch?v=q-DbAbNMW48

GCode, Modeling and Slicing

• Creating a part with support material: https://www.youtube.com/watch?v=QL9nxP_Lg1U
• Intro to FreeCad: https://www.youtube.com/watch?v=2yHRuef29L4
• Healing with MeshLab: https://www.youtube.com/watch?v=eLGIRAgLz4w
• DXF to GCODE for the Laser: https://youtu.be/YRsyEGHyt3k
• Adding DavoPads (FrogToes/PrintStamps) to Anchor Large Prints: https://www.youtube.com/watch?v=zgcggw5BglA
• Slicing two nested STLs: https://www.youtube.com/watch?v=nfIvS50zLyc

Maintenance and Tuning

• Replacing the Heated Build Platform: https://youtu.be/FkJT3ILlAHw
• NEW Tramming the heated build platform and setting Z-Zero: https://www.youtube.com/watch?v=lK_x0M8p9Ew
• Updating Slic3r Settings: http://youtu.be/A0I6Xu9Tlvc
• Multi-Head Calibration Guide: https://www.youtube.com/watch?v=IQscrgv6uaQ
• To replace your Tablet Interface Board; also to run from an external PC (start at 6:24): https://youtu.be/b583I7AlGJI
• Adjusting the X-Arm: https://youtu.be/0gFX6Mh-ths
• Tightening the X Belt: https://www.youtube.com/watch?v=4GYWfMrs0F8
• Adjusting the Y-Arm: https://youtu.be/LZd0ecogGlQ
• Tightening the Y Belt: https://www.youtube.com/watch?v=IkgviAGep-c
• Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8
• Replacing the heated build platform: https://www.youtube.com/watch?v=ed8ZqZLsTJ8
• Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUI
• Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o
• Replacing the 103 HotHead Controller: https://youtu.be/XKCEkKSolZc
• Updating the 407 Motion Controller: https://youtu.be/cFAFRkpLmww
• Changing the Print Head PCB: https://www.youtube.com/watch?v=XKCEkKSolZc
• Changing the Main I/O Board: https://www.youtube.com/watch?v=66S9XJ-KeU8
• Configuring the USB-B to run from another coputer: https://www.youtube.com/watch?v=uPqr4S0WC3Q
• Assembling the new PEEK Fan Nozzle: https://www.youtube.com/watch?v=ysO8oAzFwC4

Archives

• Original Kickstarter Video: https://www.youtube.com/watch?v=3UnMxL2bw4o
• Shop Tour: https://www.youtube.com/watch?v=Z9rgkw5r4l4
• Tramming the heated build platform: https://www.youtube.com/watch?v=soY9uOw3nCM
• Software Teaser: https://www.youtube.com/watch?v=CBaQZjpPqFU
• Big Nerd Ranch Talk: https://www.youtube.com/watch?v=jdoN_1jP8Ks
• Upgrading to Repetrel 2.x: https://www.youtube.com/watch?v=n4QwiuQtjO0
• ColumbusMAKESit Printer Burn-in: https://www.youtube.com/watch?v=UEfeVYbbKPQ
• Engine Sneak Peek (Four Materials): https://www.youtube.com/watch?v=_TjGIa60vAg
• Kids test 3D Printed Hockey Pucks: https://www.youtube.com/watch?v=xYttqVDkY2c
• Repetrel 1.806 New Features: https://www.youtube.com/watch?v=TZUeh6Bkwu8
• Setting up custom gcode: https://www.youtube.com/watch?v=tIAQT0SBR-g