Materials

From Hyrel3D
Revision as of 22:55, 6 February 2014 by Davo (talk | contribs)
Jump to navigation Jump to search

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print:

Material Reference Chart
Material Extruder HotHead (°C) Fan Speed HotBed (°C) Verified?
ABS MK-1 ~225 30% 60 yes
PLA MK-1 ~225 30% 60 yes
PlastInk Rubber MK-1 ~225 30% 60 yes
NinjaFlex MK-1 ~225 30% 60 yes
Nylon MK-1 ~225 30% 60 yes
T-Glaze MK-1 ~225 30% 60 yes
BendLay MK-1 ~225 30% 60 no
LayBrick MK-1 ~225 30% 60 no
LayWoo-d3 MK-1 ~225 30% 60 no
PET MK-1 ~225 30% 60 no
PVA MK-1 ~225 30% 60 no
Clay EMO-25 n/a n/a n/a yes
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a yes
Porcelain EMO-25 n/a n/a n/a yes
Plasticine EMO-25 n/a n/a n/a yes
Plah-Doh EMO-25 n/a n/a n/a yes
Sugru EMO-25 n/a n/a n/a yes
RTV Silicone EMO-25 n/a n/a n/a yes
GoodFilla EMO-25 n/a n/a n/a no