Materials
Revision as of 16:43, 10 July 2014 by Davo (talk | contribs) (→Materials Printable on Hyrel Machines)
Materials Printable on Hyrel Machines
The following is a list of materials with which the Hyrel machines can print:
| Material | Extruder | HotHead (°C) | Fan Speed | HotBed (°C) | Steps / nl | Verified? |
|---|---|---|---|---|---|---|
| ABS | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| PLA | MK-1 | ~200 | 30% | 60 | 0.085 | yes |
| PlastInk Rubber | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| NinjaFlex | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| Nylon | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| T-Glaze | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| BendLay | MK-1 | ~225 | 30% | 60 | 0.085 | no |
| LayBrick | MK-1 | ~225 | 30% | 60 | 0.085 | no |
| LayWoo-d3 | MK-1 | ~225 | 30% | 60 | 0.085 | yes |
| PET | MK-1 | ~225 | 30% | 60 | 0.085 | no |
| PVA | MK-1 | ~225 | 30% | 60 | 0.085 | no |
| Clay | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Metal Clay, Precious Metal Clay |
EMO-25 | n/a | n/a | n/a | *varies | yes |
| Porcelain | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Plasticine | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Plah-Doh | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Sculpey | EMO-25 | n/a | n/a | n/a | *varies | yes |
| Sugru | EMO-25 | n/a | n/a | n/a | *varies | yes |
| RTV Silicone | EMO-25 | n/a | n/a | n/a | *varies | yes |