Instructions

From Hyrel3D
Revision as of 21:00, 22 July 2015 by Davo (talk | contribs)
Jump to navigation Jump to search

Here are some step by step instructions for learning how to use your Hyrel 3D Printer.


Also, please see the Videos page.


Unboxing Your Printer

Video: https://www.youtube.com/watch?v=bHxC2__DPsM

Basic Printing

First Print PDF: http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf

Trammig your bed

a. For the current printers: https://www.youtube.com/watch?v=lK_x0M8p9Ew

b. For the older printers: https://www.youtube.com/watch?v=soY9uOw3nCM

Loading your material

a. MK1-250 for 1.75mm filaments: http://youtu.be/Llas80vYFPc

b. EMO-25 for emulsifiables (pastes): https://www.youtube.com/watch?v=4yuzpUqeE-Y

Setting your Z-Zero position

Video: http://youtu.be/ArDX4UpflmE

Your First Print

a. MK1-250 for 1.75mm filaments: https://www.youtube.com/watch?v=Fg9omXlYR-Q

b. EMO-25 for emulsifiables (pastes): http://youtu.be/tLHpaePTP-k

Intermediate Printing

Intermediate Print PDF: http://hyrel3d.net/instructions/HYREL%20LLC%20-%20MultiPrint%20v0.6.pdf

Z Level Adjustment for Dual Heads

Video: https://www.youtube.com/watch?v=IQscrgv6uaQ

Parallel Print with Dual Heads

In the works...

Parallel Calibration Marking with Dual Heads

In the works...

X/Y Offest Calibration for Dual Heads

In the works...

Serial Print (Zebra) for Dual Heads

In the works...

Serial Print (Support Material) for Dual Heads

In the works...

Serial Print (Ping Pong) for Dual Heads

In the works...

Advanced Printing

Advanced Print PDF: (to link from here)

Videos:

(work in progress)

Troubleshooting and Maintenance

A. Adjusting the X-arm: https://youtu.be/0gFX6Mh-ths

B. Adjusting the Y-arm: https://youtu.be/LZd0ecogGlQ

C. Replacing your Power Supply http://youtu.be/Zl1sqy6PWx8

D. Upgrading your MK1 fan nozzle: http://youtu.be/T6-ZLEHyxho

E. Replacing the flat flex cable on the heated build platform: https://www.youtube.com/watch?v=2bawja0Xz_c

F. Replacing the 4A fuses (1206 package) on the yoke: http://youtu.be/EosKDe-SyUIa

G. Updating the 103 HotHead / HotBed Controllers: https://youtu.be/yM8QMZBTb4o