Videos
Table of Videos
Please also see the Instructions page and the Help page.
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
The following chart compares and contrasts the various heads:
| Thumbnail | Title | Link | Date | Model | Category | Activity | Material Type | Other |
|---|---|---|---|---|---|---|---|---|
|
Setting the Z-Offset on the EHR | https://youtu.be/O1xmXCdj1xE | 2018.03.21 | EHR | Hardware | Z-Zero | n/a | n/a |
|
CO2 Laser Marking with the Hydra | https://youtu.be/kqnjlTSg-20 | 2017.11.07 | Hydra | Hardware | Laser | n/a | n/a |
|
Converting a Hydra from Printer to Laser | https://youtu.be/FnYDoNkgOrI | 2017.11.07 | Hydra | Hardware | Laser | n/a | n/a |
|
Cutting Nylon Mesh with CO2 Laser on a Hydra | https://youtu.be/fHqTlcdISIg | 2017.11.07 | Hydra | Hardware | Laser | n/a | n/a |
|
Chamber Temperature in a Cold Room | https://youtu.be/nTejDT1B6uQ | 2017.11.07 | Hydra | Hardware | Heater | n/a | n/a |
|
Cutting acrylic with the CO2 Laser | https://youtu.be/4Y9V6RWhKj4 | 2017.11.07 | Hydra | Hardware | Application | Acrylic | n/a |
|
Tiny Heated Chilled Bed Preview | https://youtu.be/dkMtzPDtIQY | 2017.11.07 | EHR, Hydra | Hardware | Application | Bioloicals | n/a |
|
Fourth Axis Rotary Print | https://youtu.be/gdvyT8HoaOw | 2017.10.20 | Hydra | Hardware | Application | ABS | n/a |
|
Additive Manufacturing of Toroid Inductor for Electronics Applications | https://youtu.be/3nKqwcXcEgY | 2017.10.02 | 30M | Hardware | Application | Conductive, Magnetic | Paste |
|
Hyrel Hydra X and Y Belt Tension Adjustments | https://www.youtube.com/watch?v=Az7V1FSRJfs | 2017.08.17 | Hydra | Hardware | Maintenance | n/a | n/a |
|
Hyrel Hydra Linear Bearing Adjustments | https://www.youtube.com/watch?v=SyMB5063J5E | 2017.08.16 | Hydra | Hardware | Maintenance | n/a | n/a |
|
Hyrel Hydra Z Belt Tension Adjustments | https://www.youtube.com/watch?v=zEsnegXhpLw | 2017.08.16 | Hydra | Hardware | Maintenance | n/a | n/a |
|
Changing the Address Resistor on the CO2 Laser | https://www.youtube.com/watch?v=WNr59eCGuK4 | 2017.08.07 | Hydra | hardware | Update | n/a | n/a |
|
CO2 Laser Alignment | https://www.youtube.com/watch?v=qBBxkx40H8s | 2017.07.27 | Hydra | Hardware | Adjustment | n/a | n/a |
|
Hydra Yoke Adjustment | https://www.youtube.com/watch?v=yiizFlScq9Q | 2017.07.14 | Hydra | Hardware | Adjustment | n/a | n/a |
|
Hydra Yoke Angle Adjustment | https://www.youtube.com/watch?v=cbiCnP_YEbA | 2017.07.13 | Model | Hardware | Adjustment | n/a | n/a |
|
Engnie, High Resolution (EHR) Setup, Part 2 | https://www.youtube.com/watch?v=xMsXzGPHjng | 2017.07.10 | EHR | Hardware, Software | Instruction | n/a | n/a |
|
Engnie, High Resolution (EHR) Setup, Part 1 | https://www.youtube.com/watch?v=NbWgw9KY6Ic | 2017.07. | EHR | Hardware, Software | Instruction | n/a | n/a |
|
EHR Scaffold Instructions | https://www.youtube.com/watch?v=uC7acwIkKmQ | 2017.06.26 | EHR | Hardware | Operation | Non-Filament | Scaffold |
|
EHR Scaffold Intro | https://www.youtube.com/watch?v=b1x2dvdYkTE | 2017.06.26 | EHR | Hardware | Instruction | Non-Filament | Scaffold |
|
Unclogging a rare clogged MK1-250 | https://www.youtube.com/watch?v=oisWKujfXAI | 2017.06.22 | MK1-250, MK2-250 | Hardware | Maintenance | Filament | Clog |
|
Unclogging a rare clogged MK1-450 | https://www.youtube.com/watch?v=6FQJuhd2Lxo | 2017.06.22 | MK1-450 | Hardware | Maintenance | Filament | Clog |
|
Flashing Firmware on the Modified CO2 Laser Controller | https://www.youtube.com/watch?v=WrImt7_Pnxo | 2017.06.21 | CO2 Laser | Firmware | Upgrade | Laser | n/a |
|
The Hyrel Hydra Family | https://www.youtube.com/watch?v=1J5bqvcV3Rs | 3017.06.06 | Hydra | Hardware | Demonstration | All | n/a |
|
High Resolution Engine Vacuum Bed | https://www.youtube.com/watch?v=CF7eRdFuZYQ | 2017.05.22 | EHR | Hardware | Demonstration | Any | Vacuum Bed |
|
High Resolution Engine Setup | https://www.youtube.com/watch?v=eltjeQ6KerM | 2017.05.09 | EHR | Hardware | Instructions | Any | n/a |
|
SDS Clench Valve Assembly Instructions | https://www.youtube.com/watch?v=SvX4gKqAQDI | 2017.05.19 | SDS | Hardware | Instructions | Non-Filament | n/a |
|
How to Load the SDS Clench Valve | https://www.youtube.com/watch?v=Mz5J8jsb6D4 | 2017.05.16 | SDS (all EMO-type) | Hardware | Installation | Non-Filament | n/a |
|
EHR Accuracy Test | https://www.youtube.com/watch?v=JwKq8_tahYA | 2017.05.16 | EHR | Hardware | Demonstration | All | n/a |
|
Hydra 430, 640, 645 Controls Overview | https://www.youtube.com/watch?v=Udbu_Zuh8k0 | 2017.05.08 | Hydra 430, 640, 645 | Hardware | Overview | All | n/a |
|
Using Low Temperature Solder Paste to connect a Flat Flex Cable | https://www.youtube.com/watch?v=cClPqIJwhLs | 2017.04.17 | n/a | Hardware | Demonstration | Solder Paste | n/a |
|
Draining Laser Coolant on the Hyrel Hydra | https://www.youtube.com/watch?v=GCzPw4FOG8c | 2017.04.13 | Hydra 640, 645 | Hardware | Maintenance | Laser | n/a |
|
Hydra Home Calibration Details | https://www.youtube.com/watch?v=pPtGSwyS140 | 2017.04.07 | Hydra (All) | Firmware | Settings | n/a | n/a |
|
Replacing the top component on an STS Head Assembly | https://www.youtube.com/watch?v=LLIWqTRBhTo | 2017.04.05 | SDS | Hardware | Maintenance | Non-filament | n/a |
|
HYDRA Hot Bed Installation | https://www.youtube.com/watch?v=qxbtI034omk | 2017.03.22 | Hydra (All) | Hardware | Installation | All | n/a |
|
Hydra Model Startup | https://www.youtube.com/watch?v=fuLCsqfAX3E | 2017.03.22 | Hydra (All) | Hardware | Startup | All | n/a |
|
Unboxing the Hydra Floor Model Units | https://www.youtube.com/watch?v=LhnV9H7LV9g | 2017.03.19 | Hydra (All) | Hardware | Startup | All | n/a |
|
Hydra Overview by CTO Karl Gifford | https://www.youtube.com/watch?v=ULpn18OqD-U | 2017.03.09 | Hydra (All | Hardware | Overview | All | n/a |
|
How to Manage the Pick-and-Place with Repetrel Software | https://www.youtube.com/watch?v=QEfskyU7LJ4 | 2017.03.02 | PNP | Hardware | Setup | PNP | n/a |
|
Hyrel Hydra Versitility | https://www.youtube.com/watch?v=Jz3onGdmW1c | 2017.02.08 | Hydra (All) | Hardware | Introduction | All | n/a |
|
Hydra Vinyl Cutter Overview | https://www.youtube.com/watch?v=pKkrd4R_54Y | 2017.02.16 | Hydra (All) | Hardware | Demonstration | Vinyl | n/a |
|
Hyrel 3D Hydra Pick-and-Place Introduction | https://www.youtube.com/watch?v=haKWeCbXkMI | 2017.02.10 | Hydra (All) | Hardware | Introduction | Pick-And-Place | n/a |
|
The Hyrel3D Hydra Line | https://www.youtube.com/watch?v=uACoqtNbXE0 | 2017.01.26 | Hydra | Hardware | Introduction | All | n/a |
|
Tramming the bed on the 16A | https://www.youtube.com/watch?v=KAoSS-Z-aeY | 2017.01.19 | Hydra (All) | Hardware | Maintenance | n/a | n/a |
|
The Benefits of Microscope Inspection During Printing | https://www.youtube.com/watch?v=tibkVZB_n9c | 2017.01.06 | All | Hardware | Instruction | All | n/a |
|
Printing PLGA for internal Biological Applications | https://www.youtube.com/watch?v=aR4d-2BZj_Y | 2017.01.02 | All | Hardware | Maintenance | Emulsion | n/a |
|
Varialble Width Conductive Paste Extrusion | https://www.youtube.com/watch?v=z4IGQ5JMP6g | 2016.12.30 | All | Hardware | Introduction | Emulsion | n/a |
|
Microscope Print View Setup | https://www.youtube.com/watch?v=2f5FEhVsqy8 | 2016.12.30 | All | Hardware | Maintenance | All | n/a |
|
Replacing the LED Strip | https://www.youtube.com/watch?v=D2sWEYRVAII | 2016.12.23 | System 30M | Hardware | Maintenance | LEDs | n/a |
|
Replacing the Front Switch Panel | https://www.youtube.com/watch?v=14ynZ3DHzVg | 2016.12.23 | System 30M | Hardware | Maintenance | Switch Panel | n/a |
|
Static Mixing Head Explained - v2 Including SDS Heads | https://www.youtube.com/watch?v=DQj6oLfrbLo | 2016.12.20 | All | Hardware | Introduction | Emulsion | n/a |
|
Hot Bed Manufacturing | https://www.youtube.com/watch?v=_vJXnB-8JII | 2016.12.16 | Hydra | Hardware | Instruction | All | HotBed |
|
Static Mixing Head Explained | https://www.youtube.com/watch?v=3azICOBuHdk | 2016.12.15 | MODEL | Hardware | Instruction | Emulsion | Static Mixing |
|
Timelapse Recording | https://www.youtube.com/watch?v=6qJ-2uFt-_Y | 2016.12.06 | All | Software | Instruction | n/a | n/a |
|
HotHead LEDs Explained | https://www.youtube.com/watch?v=ROpcvqS r8s | 2016.12.06 | All | Hardware | Instruction | All | LEDs |
|
LA6-450 and LA5-808 Laser Overview | https://www.youtube.com/watch?v=Tz6mRSkOaSk | 2016.12.02 | LA5-808, LA6-450 | Hardware | Instruction | Laser | n/a |
|
SDS and CSD Overview | https://www.youtube.com/watch?v=h95IurET7UM | 2016.11.29 | SDS, CSD | Hardware | Instruction | Emulsion | n/a |
|
Quiet Storm Cooling Fan Overview | https://www.youtube.com/watch?v=4B9hoMLNOuQ | 2016.11.28 | QS | Hardware | Overview | Filament | n/a |
|
VOL-25 and VCD-25 Overview | https://www.youtube.com/watch?v=9_onCKhT_dg | 2016.11.28 | VOL-25, VCD-25 | Hardware | Overview | Emulsion | n/a |
|
KRA-15 and KCD-15 Overview | https://www.youtube.com/watch?v=QD2FrZ4kg1g | 2016.11.28 | KRA-15, KCD-15 | Hardware | Overview | Emulsion | n/a |
|
Hydra 640 (16A) Two Part Test Print | https://www.youtube.com/watch?v=Rc2UFwjUtc4 | 2016.11.23 | Hydra (All) | Hardware | Demonstration | Filament | n/a |
|
Extrusion Prototype Print | https://www.youtube.com/watch?v=Ql1NZLWVJQM | 2016.11.23 | Hydra 640 | Hardware | Demonstration | Filament | n/a |
|
EMO-25 and COD-25 Overview | https://www.youtube.com/watch?v=ktK256u0sN8 | 2016.11.17 | EMO-25, COD-25 | Hardware | Overview | Emulsion | n/a |
|
Session 3C Slicing for Second Head Support | https://www.youtube.com/watch?v=Vn8jnvwh5to | 2016.11.15 | Any | Software | Slicing | Any | n/a |
|
Session 3A - Setting Two Heads to Z-Zero | https://www.youtube.com/watch?v=p1Ihd4ETxhg | 2016.11.14 | All | Software | Instruction | All | n/a |
|
Session 3B - Calibrating the Offset Between Two Heads | https://www.youtube.com/watch?v=FCuSvQm6ej4 | 2016.11.14 | All | Software | Instruction | All | n/a |
|
Session 2D - Editing Slic3r Recipes | https://www.youtube.com/watch?v=dkQpsJWRI4Y | 2016.11.109 | All | Software | Instruction | All | n/a |
|
Session 2E - Slicing your STL and Viewing your GCODE | https://www.youtube.com/watch?v=kJc9sNlV0fA | 2016.11.09 | All | Software | Instruction | All | n/a |
|
Session 2C - Positioning, Scaling, and Rotating your STL | https://www.youtube.com/watch?v=IQbgGwiGVZA | 2016. | All | Software | Instruction | All | n/a |
|
Session 1A - Hardware and Software Overview | https://www.youtube.com/watch?v=mVyCq7CPGLg | 2016.11.03 | All | Software | Instruction | All | n/a |
|
Session 1B - Communications and Bed Leveling | https://www.youtube.com/watch?v=2tIHw_JIQAI | 2016.11.02 | All | Software | Instruction | All | n/a |
|
Session 1C - Printing with Plasticine | https://www.youtube.com/watch?v=lFATCfKJf4I | 2016.11.02 | All | Software | Instruction | All | n/a |
|
Session 2A: Simple CAD Modeling in FreeCAD | https://www.youtube.com/watch?v=2yHRuef29L4 | 2016.08.24 | All | Software | Instruction | All | n/a |
|
Session 2B - Healing an STL in MeshLab | https://www.youtube.com/watch?v=eLGIRAgLz4w | 2016.08.17 | All | Software | Instruction | All | n/a |
|
PC to Printer Connectivity | https://www.youtube.com/watch?v=RlJqdhtpB6Q | 2016.11.01 | All | Software | Instruction | All | n/a |
|
Using the Spindle Tool to rework Circuit Boards | https://www.youtube.com/watch?v=C88ni0huwhw | 2016.10.27 | All | Hardware | Instruction | Spindle Tool | n/a |
|
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software | https://www.youtube.com/watch?v=KIGeQmXNbNE | 2016.10.17 | All | All | Demonstration | n/a | n/a |
|
Table Arm (X-Arm) Block Adjustment | https://www.youtube.com/watch?v=ImMo3V1D70w | 2016.10.14 | Non-Hydras | Hardware | Maintenance | All | n/a |
|
MK1-250 Overview | https://www.youtube.com/watch?v=yaCYFmoIESk | 2016.10.14 | All | Hardware | Instruction | MK1-250 | n/a |
|
MK1-450 Overview | https://www.youtube.com/watch?v=UvZMecXsHEM | 2016.10.14 | All | Hardware | Instruction | MK1-450 | n/a |
|
MK2-250 Overview | https://www.youtube.com/watch?v=SOGKeU3vLbs | 2016.10.14 | All | Hardware | Instruction | MK2-250 | n/a |
|
Hyrel3D Replacing the Heated Build Platform | https://www.youtube.com/watch?v=FkJT3ILlAHw | 2016.10.03 | All | Hardware | Instruction | HotBed | n/a |
|
Multi Head Printing - Nested STLs | https://www.youtube.com/watch?v=3KwJ6OgOx14 | 2016.09.22 | All | Software | Instruction | All | n/a |
|
X-Axis Belt Tightening | https://www.youtube.com/watch?v=4GYWfMrs0F8 | 2016.09.22 | S30, ESR | Hardware | Maintenance | All | n/a |
|
Y-Axis Belt Tightening | https://www.youtube.com/watch?v=IkgviAGep-c | 2016.09.21 | S30, ESR | Hardware | Maintenance | All | n/a |
|
Plasma Magnetic Vortex Deposition | https://www.youtube.com/watch?v=lQy25Nlj3_Q | 2016.09.21 | Any | Hardware | Demonstration | EMO-HV | n/a |
|
3D Milling on the Hydra Series | https://www.youtube.com/watch?v=LQb5vS97jFo | 2016.09.02 | Hydra | Hardware | Demonstration | ST1 Spindle Tool | n/a |
|
Introducing the Hydra 640 (formerly Model 16A) | https://www.youtube.com/watch?v=81sVBZOOcbw | 2016.08.05 | Hydra | Hardware | Introduction | Any | n/a |
|
USBB Jumper Instructions | https://www.youtube.com/watch?v=uPqr4S0WC3Q | 2016.07.19 | S30M, ESR, EHR | Hardware | Instruction | Any | n/a |
|
Size Does Matter | https://www.youtube.com/watch?v=Rw2E_d-q9bQ | 2016.07.11 | Hydra Series | Hardware | Introduction | Any | n/a |
|
Print Heads Overview | https://www.youtube.com/watch?v=xGriCCrfkuw | 2016.006.16 | Any | Hardware | Overview | Print Heads | n/a |
|
Session 2F - Loading and Printing with Filaments, MK-Series Heads | https://www.youtube.com/watch?v=QMyuKdgiWI4 | 2016.06.03 | Any | Hardware | Instruction | MK Series | n/a |
|
MK1-250 PEEK Nozzle Assembly | https://www.youtube.com/watch?v=ysO8oAzFwC4 | 2016.05.02 | Any | Hardware | Instruction | MK1-250, MK2-250 | n/a |
|
New Hydra Printer Line Intro | https://www.youtube.com/watch?v=BoHRC9m5nlQ | 2016.03.28 | Hydra | Hardware | Introduction | Any | n/a |
|
Bioplotting for under $10K | https://www.youtube.com/watch?v=XREWb_Md5o0 | 2016.02.17 | Any | Hardware | Introduction | SDS Series | n/a |
|
Programming Head Offsets | https://www.youtube.com/watch?v=9zxxBYbdlOE | 2016.02.17 | All | Software | Instruction | Any | n/a |
|
Slicing for a Two-Material Print | https://www.youtube.com/watch?v=nfIvS50zLyc | 2016.02.17 | Any | Software | Instruction | Any | n/a |
|
Loading Filament and Printing with the Hyrel3D MK2-250 | https://www.youtube.com/watch?v=0dS3bC0BnRQ | 2016.02.09 | Any | Hardware | Instruction | MK2-250 | n/a |
|
Loading Filament and Printing with the Hyrel3D MK1-250 | https://www.youtube.com/watch?v=v2ifSlZ0qEw | 2016.02.08 | Any | Hardware | Instruction | MK1-250 | n/a |
|
Loading and Printing with the EMO-25 Print Head | https://www.youtube.com/watch?v=q-DbAbNMW48 | 2016.02.04 | Any | Hardware | Instruction | EMO-25 | n/a |
|
SDS RTV Instructions, v2 | https://www.youtube.com/watch?v=ej55bZXrltA | 2016.02.04 | Any | Hardware | Instruction | SDS Series | RTV |
|
Intro to Hyrel Possibilities - Jan 2016 | https://www.youtube.com/watch?v=MwrhV74NjCQ | 2016.01.25 | All | Hardware | Overview | All | n/a |
|
MK2-250 Dual Drive for Flexible Filaments | https://www.youtube.com/watch?v=V_zCytnGvvo | 2016.01.20 | Any | Hardware | Introduction | MK2-250 | n/a |
|
6w, 450nm Laser Test | https://www.youtube.com/watch?v=O1IGa-8y9yQ | 2016.01.14 | Any | Hardware | Demonstration | LA6-450 | n/a |
|
SDS RTV Instructions, v1 | https://www.youtube.com/watch?v=0JJp7HeK35M | 2016.01.14 | Any | Hardware | Instructions | SDS Series | n/a |
|
Introducing the SDS Print Heads | https://www.youtube.com/watch?v=XKHa1CXnSdI | 2016.01.08 | Any | Hardware | Introduction | SDS Series | n/a |
|
Sneak Peek: Pick and Place Prototype | https://www.youtube.com/watch?v=BlSGlOpyipI | 2016.01.05 | Hydra | Hardware | Introduction | PNP Pick and Place | n/a |
|
LA6-450: 6w, 450nm Diode Laser Head | https://www.youtube.com/watch?v=OceUiuTixPA | 2015.12.22 | Any | Hardware | Introduction | LA6-450 | n/a |
|
3D Printing RTV Silicone | https://www.youtube.com/watch?v=vmw0LS_f9V0 | 2015.12.18 | Any | Hardware | Demonstration | SDS-Series | n/a |
|
Loading the VCD-25 | https://www.youtube.com/watch?v=YWe3TQGgNW0 | 2015.12.09 | Any | Hardware | Instruction | VCD-25 | n/a |
|
Short Porcelain Print Demo | https://www.youtube.com/watch?v=huJuexTLbYA | 2015.12.08 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Replacing the Tablet Interface Board | https://www.youtube.com/watch?v=b583I7AlGJI | 2015.11.25 | System 30M, EHR | Hardware | Instruction | n/a | n/a |
|
2016 Design Contest Video | https://www.youtube.com/watch?v=ZKAzXoJ0q8Y | 2015.11.17 | System 30M | Hardware | Contest | All | n/a |
|
DXF to Laser Gcode Generation | https://www.youtube.com/watch?v=YRsyEGHyt3k | 2015.10.20 | Any | Software | Instruction | Laser, Spindle Tool | n/a |
|
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate) | https://www.youtube.com/watch?v=Om9cjxMXuxY | 2015.09.29 | Any | Hardware | Demonstration | MK1-450 | n/a |
|
Healing with MeshLab | https://www.youtube.com/watch?v=IreaoCfQ8mE | 2015.09.01 | Any | Software | Instruction | Any | n/a |
|
Postprocessing with a Heat Gun | https://www.youtube.com/watch?v=0Aj9WCabPgw | 2015.08.17 | Any | Hardware | Instruction | Any | n/a |
|
Introduction to Hyrel 3D Possibilities, 2015 | https://www.youtube.com/watch?v=4oxCqR_DVNQ | 2015.08.11 | All | Hardware | Introduction | All | n/a |
|
Updating to Repetrel 2 4xx | https://www.youtube.com/watch?v=n4QwiuQtjO0 | 2015.08.06 | All | Software | Instruction | n/a | n/a |
|
Updating your 407 Motion Controller | https://www.youtube.com/watch?v=cFAFRkpLmww | 2015.07.24 | All | Software | Instruction | n/a | n/a |
|
Replacing the HOTHEAD controller | https://www.youtube.com/watch?v=XKCEkKSolZc | 2015.07.23 | All | Hardware | Instruction | n/a | n/a |
|
Programming the HOTBED controller on the System 30M and ESR | https://www.youtube.com/watch?v=yM8QMZBTb4o | 2015.07.22 | All | Software | Instruction | n/a | n/a |
|
Leveling the X-Arm on System 30M, Engine SR | https://www.youtube.com/watch?v=0gFX6Mh-ths | 2015.06.02 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR | https://www.youtube.com/watch?v=LZd0ecogGlQ | 2015.03.18 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Manually Setting the Z-Zero Position | https://www.youtube.com/watch?v=ArDX4UpflmE | 2015.03.09 | System 30M, Engine SR | Hardware | Instruction | n/a | n/a |
|
Picking Right 3D Printer For You | https://www.youtube.com/watch?v=vc9gBZtUL7c | 2015.02.08 | All | Hardware | Overview | All | n/a |
|
Changing the Main I/O Board, System 30M, EHR, ESR | https://www.youtube.com/watch?v=66S9XJ-KeU8 | 2015.02.12 | All | Hardware | Overview | All | n/a |
|
Laser Test Print | https://www.youtube.com/watch?v=yEePz8_0ttc | 2015.02.17 | All | Hardware | Demonstration | LA5-808 Diode Laser | n/a |
|
EMO Series Printing Tips | https://www.youtube.com/watch?v=tLHpaePTP-k | 2015.02.10 | All | Hardware | Instruction | EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2) | n/a |
|
Changing Power Supplies in the 30M and ESR | https://www.youtube.com/watch?v=Zl1sqy6PWx8 | 2015.02.04 | 30M, ESR | Hardware | Instruction | Any | n/a |
|
Multi-Head Calibration Guide | https://www.youtube.com/watch?v=IQscrgv6uaQ | 2015.02.03 | Any | Hardware/Software | Instruction | Any | n/a |
|
LA5-808 "Shark V" Diode Laser | https://www.youtube.com/watch?v=0lpa4nENtyQ | 2015.01.14 | Any | Hardware | Introduction | LA5-808 | n/a |
|
Luer Tip Kit for EMO and SDS Series Print Heads | https://www.youtube.com/watch?v=mPYPWjnDGho | 2014.12.23 | Any | Hardware | Introduction | LTK | n/a |
|
Print Head SDK | https://www.youtube.com/watch?v=-VHxf182fIs | 2014.12.09 | All | Hardware, Software | Introduction | SDK | n/a |
|
MK Series Printing Tips | https://www.youtube.com/watch?v=Fg9omXlYR-Q | 2014.11.12 | All | Procedure | Instruction | MK Series | n/a |
|
Replacing fuses (old) on the Yoke | https://www.youtube.com/watch?v=EosKDe-SyUI | 2014.08.27 | ALL | Hardware | Instruction | All | n/a |
|
Loading the EMO-type Reservoirs | https://www.youtube.com/watch?v=4yuzpUqeE-Y | 2014.04.23 | ALL | Hardware | Instruction | EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2 | n/a |
|
Changing the Economics of 3D Printing | https://www.youtube.com/watch?v=xQFacnpzmv0 | 2013.12.24 | All | Hardware | Demonstration | n/a | n/a |
|
System 30 Product Release | https://www.youtube.com/watch?v=c9HvQ3SepoM | 2013.10.29 | System 30 | Hardware, Software | Introduction | n/a | n/a |
|
Simultaneous 3D Printing of Multiple Parts | https://www.youtube.com/watch?v=P6aMBQSZPgg | 2013.07.02 | All | Hardware, Software | Demonstration | MK1-250 | n/a |
|
3D Printing with Sugru The Amazing Self-Setting Rubber | https://www.youtube.com/watch?v=nuii5rP53Js | 2013.06.19 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Play-Doh | https://www.youtube.com/watch?v=dihvAQR7LQg | 2013.06.04 | All | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Plasticine | https://www.youtube.com/watch?v=cw8XiW46G0k | 2013.04.13 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
3D Printing with Air-Dry Modeling Clay | https://www.youtube.com/watch?v=trdz4YDbdsw | 2013.04.06 | Any | Hardware | Demonstration | EMO-25 | n/a |
|
Interchangeable Hot-Swappable Heads | https://www.youtube.com/watch?v=XNwv7Dw_Zwg | 2013.05.12 | Any | Hardware, Software | Demonstration | MK1-250 | n/a |
|
Thank you, Kickstarters! | https://www.youtube.com/watch?v=mu9xMmkZFns | 2012.11.05 | All | Hardware, Software | Thank You | n/a | n/a |
|
Quick Tour of our Main Shop! | https://www.youtube.com/watch?v=Z9rgkw5r4l4 | 2012.10.17 | All | Introduction | Thank You | n/a | n/a |