Emulsifiables
Jump to navigation
Jump to search
EMO-Type heads are for printing as follows:
- With pastes, gels, emulsifiables or waxes.
- At room or elevated temperatures.
- With or without UV Crosslining.
- With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.
These include the following:
Model | EMO-25 | COD-25 | VOL-25 | VCD-25 | KRA-15 | KCD-15 |
---|---|---|---|---|---|---|
Max Temp | Ambient | Ambient | 100°C | 100°C | 150°C | 150°C |
UV Crosslinking | no | yes | no | yes | no | yes |
Settings for these heads (based on planetary gear ratios) are as follows; you will need to adjust these for the qualities of your print media:
Gear Reduction |
Overrides | Prime | Unprime | |||
---|---|---|---|---|---|---|
Pulses | FR% | Steps | Dwell | Steps | Dwell | |
19:1 | 1.600 | 1.000 | 500 | 100 | 400 | 100 |
27:1 | 2.300 | 1.000 | 700 | 100 | 550 | 100 |
51:1 | 4.700 | 1.000 | 900 | 110 | 750 | 105 |
100:1 | 8.750 | 1.000 | 2000 | 120 | 1600 | 110 |