Filaments

From Hyrel3D
Revision as of 12:02, 8 December 2015 by Davo (talk | contribs) (Created page with "Settings for the MK1-250: ; Material : '''ABS''' : '''(any)''' Color : '''0.500''' mm Nozzle : '''(any)''' Layer Z (will be overwritten with gcode value) ; Temp Info : '''240...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Settings for the MK1-250:

Material
ABS
(any) Color
0.500 mm Nozzle
(any) Layer Z (will be overwritten with gcode value)
Temp Info
240 Print Temperature
100 Pwr Factor
(any) Min
(any) Max
OverRides
0.780 Pulses
1.000 Feed Rate %
Prime
250 Steps
10,000 Rate
50 ms Dwell Time
1 Prime After Tool Change
Unprime
250 Steps
10,000 Rate
60 ms Dwell Time
1 Unprime Before Tool Change
Offsets
OFF Clone Head
0.000 X
0.000 Y
0.000 Z
Head Info
MK1 Model
1 Meg RTD Type
High Motor Current
Sixteenth Step Mode