Test
Jump to navigation
Jump to search
| Settings: | MK1-250: | MK1-350/400: |
|---|---|---|
| Material | ||
| Type | (any) | (any) |
| Color | (any) | (any) |
| Nozzle | 0.500 | 0.500 |
| Layer | (any) | (any) |
| Temp Info | ||
| Print Temp | 240 | 410 |
| Power Factor | 100 | 100 |
| Minimum | (any) | (any) |
| Maximum | (any) | (any) |
| Overrides | ||
| Pulses | 0.78 | 0.78 |
| Feed Rate % | 1.000 | 1.000 |
| Prime | ||
| Steps | 250 | 250 |
| Rate | 10,000 | 10,000 |
| Dwell Time (ms) | 50 | 50 |
| Before Tool Change | 1 | 1 |
| Unprime | ||
| Steps | 250 | 250 |
| Rate | 10,000 | 10,000 |
| Dwell Time (ms) | 60 | 60 |
| After Tool Change | 1 | 1 |
| Offsets | ||
| Clone Head | Off | Off |
| X | 0,000 | 0,000 |
| Y | 0,000 | 0,000 |
| Z | 0,000 | 0,000 |
| Head Info | ||
| Model | 250 | 250 |
| RTD Type | 1 Meg | 1 Meg |
| Motor Current | High | High |
| Step Mode | Sixteenth | Sixteenth |