Videos

From Hyrel3D
Jump to navigation Jump to search

Please also see the Instructions page and the Getting Started page.

Our YouTube Page.

Product Features

Print Material

Instructions

Here are some basic instructions; a more structured presentation can be seen at the Instructions page.

Training Lessons

1: Basics and Emulsifiables

  1. Session 1A: Hardware and Software Overview
  2. Session 1B: Communications and Tramming
  3. Session 1C: Setting Z-Zero and Emulsifiable Print

2: Modeling and Filaments

  1. Session 2A: Simple CAD Modeling in FreeCAD
  2. Session 2B: Healing an STL in MeshLab
  3. Session 2C: Positioning, Scaling, and Rotating your STL
  4. Session 2D: Editing Slic3r Recipes
  5. Session 2E: Slicing your STL and Viewing your GCODE
  6. Session 2F: Loading and Printing with Filaments

3: One STL with Multiple Heads

  1. Session 3A - Setting Two Heads to Z-Zero
    1. Session 3A - Alternate Version
  2. [[Session 3B - Calibrating the Offset Between Two Heads
    1. GCODE: Calibration Target
  3. Session 3C - Slicing and Printing with Second Head Support
  4. Session 3D - Clone or Parallel Printing

4: Multiple STLs with Multiple Heads

  1. Session 4 - Advanced Slicing and Printing: Multiple STLs with Multiple Heads

General Information

Filament Specific

Emulsifiable Specific

GCode, Modeling and Slicing

Troubleshooting, Maintenance and Tuning

Archives