Videos

Main Table

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

The following chart compares and contrasts the various heads:

Table of Video Links

Thumbnail	Title	Link	Date	Model	Category	Activity	Material Type	Other
	Engine HR Scaffold Instructions	https://www.youtube.com/watch?v=uC7acwIkKmQ	2017.06.26	Engine HR	Hardware	Operation	Non-Filament	Scaffold
	Engine HR Scaffold Intro	https://www.youtube.com/watch?v=b1x2dvdYkTE	2017.06.26	Engine HR	Hardware	Instruction	Non-Filament	Scaffold
	Unclogging a rare clogged MK1-250	https://www.youtube.com/watch?v=oisWKujfXAI	2017.06.22	MK1-250, MK2-250	Hardware	Maintenance	Filament	Clog
	Unclogging a rare clogged MK1-450	https://www.youtube.com/watch?v=6FQJuhd2Lxo	2017.06.22	MK1-450	Hardware	Maintenance	Filament	Clog
	Flashing Firmware on the Modified CO2 Laser Controller	https://www.youtube.com/watch?v=WrImt7_Pnxo	2017.06.21	CO2 Laser	Firmware	Upgrade	Laser	n/a
	The Hyrel Hydra Family	https://www.youtube.com/watch?v=1J5bqvcV3Rs	3017.06.06	Hydra	Hardware	Demonstration	All	n/a
	High Resolution Engine Vacuum Bed	https://www.youtube.com/watch?v=CF7eRdFuZYQ	2017.05.22	Engine HR	Hardware	Demonstration	Any	Vacuum Bed
	High Resolution Engine Setup	https://www.youtube.com/watch?v=eltjeQ6KerM	2017.05.09	Engine HR	Hardware	Instructions	Any	n/a
	SDS Clench Valve Assembly Instructions	https://www.youtube.com/watch?v=SvX4gKqAQDI	2017.05.19	SDS	Hardware	Instructions	Non-Filament	n/a
	How to Load the SDS Clench Valve	https://www.youtube.com/watch?v=Mz5J8jsb6D4	2017.05.16	SDS (all EMO-type)	Hardware	Installation	Non-Filament	n/a
	Engine HR Accuracy Test	https://www.youtube.com/watch?v=JwKq8_tahYA	2017.05.16	Engine HR	Hardware	Demonstration	All	n/a
	Hydra 430, 640, 645 Controls Overview	https://www.youtube.com/watch?v=Udbu_Zuh8k0	2017.05.08	Hydra 430, 640, 645	Hardware	Overview	All	n/a
	Using Low Temperature Solder Paste to connect a Flat Flex Cable	https://www.youtube.com/watch?v=cClPqIJwhLs	2017.04.17	n/a	Hardware	Demonstration	Solder Paste	n/a
	Draining Laser Coolant on the Hyrel Hydra	https://www.youtube.com/watch?v=GCzPw4FOG8c	2017.04.13	Hydra 640, 645	Hardware	Maintenance	Laser	n/a
	Hydra Home Calibration Details	https://www.youtube.com/watch?v=pPtGSwyS140	2017.04.07	Hydra (All)	Firmware	Settings	n/a	n/a
	Replacing the top component on an STS Head Assembly	https://www.youtube.com/watch?v=LLIWqTRBhTo	2017.04.05	SDS	Hardware	Maintenance	Non-filament	n/a
	HYDRA Hot Bed Installation	https://www.youtube.com/watch?v=qxbtI034omk	2017.03.22	Hydra (All)	Hardware	Installation	All	n/a
	Hydra Model Startup	https://www.youtube.com/watch?v=fuLCsqfAX3E	2017.03.22	Hydra (All)	Hardware	Startup	All	n/a
	Unboxing the Hydra Floor Model Units	https://www.youtube.com/watch?v=LhnV9H7LV9g	2017.03.19	Hydra (All)	Hardware	Startup	All	n/a
	Hydra Overview by CTO Karl Gifford	https://www.youtube.com/watch?v=ULpn18OqD-U	2017.03.09	Hydra (All	Hardware	Overview	All	n/a
	How to Manage the Pick-and-Place with Repetrel Software	https://www.youtube.com/watch?v=QEfskyU7LJ4	2017.03.02	PNP	Hardware	Setup	PNP	n/a
	Hyrel Hydra Versitility	https://www.youtube.com/watch?v=Jz3onGdmW1c	2017.02.08	Hydra (All)	Hardware	Introduction	All	n/a
	Hydra Vinyl Cutter Overview	https://www.youtube.com/watch?v=pKkrd4R_54Y	2017.02.16	Hydra (All)	Hardware	Demonstration	Vinyl	n/a
	Hyrel 3D Hydra Pick-and-Place Introduction	https://www.youtube.com/watch?v=haKWeCbXkMI	2017.02.10	Hydra (All)	Hardware	Introduction	Pick-And-Place	n/a
	The Hyrel3D Hydra Line	https://www.youtube.com/watch?v=uACoqtNbXE0	2017.01.26	Hydra	Hardware	Introduction	All	n/a
	Tramming the bed on the 16A	https://www.youtube.com/watch?v=KAoSS-Z-aeY	2017.01.19	Hydra (All)	Hardware	Maintenance	n/a	n/a
	The Benefits of Microscope Inspection During Printing	https://www.youtube.com/watch?v=tibkVZB_n9c	2017.01.06	All	Hardware	Instruction	All	n/a
	Printing PLGA for internal Biological Applications	https://www.youtube.com/watch?v=aR4d-2BZj_Y	2017.01.02	All	Hardware	Maintenance	Emulsion	n/a
	Varialble Width Conductive Paste Extrusion	https://www.youtube.com/watch?v=z4IGQ5JMP6g	2016.12.30	All	Hardware	Introduction	Emulsion	n/a
	Microscope Print View Setup	https://www.youtube.com/watch?v=2f5FEhVsqy8	2016.12.30	All	Hardware	Maintenance	All	n/a
	Replacing the LED Strip	https://www.youtube.com/watch?v=D2sWEYRVAII	2016.12.23	System 30M	Hardware	Maintenance	LEDs	n/a
	Replacing the Front Switch Panel	https://www.youtube.com/watch?v=14ynZ3DHzVg	2016.12.23	System 30M	Hardware	Maintenance	Switch Panel	n/a
	Static Mixing Head Explained - v2 Including SDS Heads	https://www.youtube.com/watch?v=DQj6oLfrbLo	2016.12.20	All	Hardware	Introduction	Emulsion	n/a
	Hot Bed Manufacturing	https://www.youtube.com/watch?v=_vJXnB-8JII	2016.12.16	Hydra	Hardware	Instruction	All	HotBed
	Static Mixing Head Explained	https://www.youtube.com/watch?v=3azICOBuHdk	2016.12.15	MODEL	Hardware	Instruction	Emulsion	Static Mixing
	Timelapse Recording	https://www.youtube.com/watch?v=6qJ-2uFt-_Y	2016.12.06	All	Software	Instruction	n/a	n/a
	HotHead LEDs Explained	https://www.youtube.com/watch?v=ROpcvqS r8s	2016.12.06	All	Hardware	Instruction	All	LEDs
	LA6-450 and LA5-808 Laser Overview	https://www.youtube.com/watch?v=Tz6mRSkOaSk	2016.12.02	LA5-808, LA6-450	Hardware	Instruction	Laser	n/a
	SDS and CSD Overview	https://www.youtube.com/watch?v=h95IurET7UM	2016.11.29	SDS, CSD	Hardware	Instruction	Emulsion	n/a
	Quiet Storm Cooling Fan Overview	https://www.youtube.com/watch?v=4B9hoMLNOuQ	2016.11.28	QS	Hardware	Overview	Filament	n/a
	VOL-25 and VCD-25 Overview	https://www.youtube.com/watch?v=9_onCKhT_dg	2016.11.28	VOL-25, VCD-25	Hardware	Overview	Emulsion	n/a
	KRA-15 and KCD-15 Overview	https://www.youtube.com/watch?v=QD2FrZ4kg1g	2016.11.28	KRA-15, KCD-15	Hardware	Overview	Emulsion	n/a
	Hydra 640 (16A) Two Part Test Print	https://www.youtube.com/watch?v=Rc2UFwjUtc4	2016.11.23	Hydra (All)	Hardware	Demonstration	Filament	n/a
	Extrusion Prototype Print	https://www.youtube.com/watch?v=Ql1NZLWVJQM	2016.11.23	Hydra 640	Hardware	Demonstration	Filament	n/a
	EMO-25 and COD-25 Overview	https://www.youtube.com/watch?v=KtK256u0sN8	2016.11.17	EMO-25, COD-25	Hardware	Overview	Emulsion	n/a
	Session 3C Slicing for Second Head Support	https://www.youtube.com/watch?v=Vn8jnvwh5to	2016.11.15	MODEL	CATEGORY	ACTIVITY	MATERIAL	n/a
	Session 3A - Setting Two Heads to Z-Zero	https://www.youtube.com/watch?v=p1Ihd4ETxhg	2016.11.14	All	Software	Instruction	All	n/a
	Session 3B - Calibrating the Offset Between Two Heads	https://www.youtube.com/watch?v=FCuSvQm6ej4	2016.11.14	All	Software	Instruction	All	n/a
	Session 2D - Editing Slic3r Recipes	https://www.youtube.com/watch?v=dkQpsJWRI4Y	2016.11.109	All	Software	Instruction	All	n/a
	Session 2E - Slicing your STL and Viewing your GCODE	https://www.youtube.com/watch?v=kJc9sNlV0fA	2016.11.09	All	Software	Instruction	All	n/a
	Session 2C - Positioning, Scaling, and Rotating your STL	https://www.youtube.com/watch?v=IQbgGwiGVZA	2016.	All	Software	Instruction	All	n/a
	Session 1A - Hardware and Software Overview	https://www.youtube.com/watch?v=mVyCq7CPGLg	2016.11.03	All	Software	Instruction	All	n/a
	Session 1B - Communications and Bed Leveling	https://www.youtube.com/watch?v=2tIHw_JIQAI	2016.11.02	All	Software	Instruction	All	n/a
	Session 1C - Printing with Plasticine	https://www.youtube.com/watch?v=lFATCfKJf4I	2016.11.02	All	Software	Instruction	All	n/a
	Session 2A: Simple CAD Modeling in FreeCAD	https://www.youtube.com/watch?v=2yHRuef29L4	2016.08.24	All	Software	Instruction	All	n/a
	Session 2B - Healing an STL in MeshLab	https://www.youtube.com/watch?v=eLGIRAgLz4w	2016.08.17	All	Software	Instruction	All	n/a
	PC to Printer Connectivity	https://www.youtube.com/watch?v=RlJqdhtpB6Q	2016.11.01	All	Software	Instruction	All	n/a
	Using the Spindle Tool to rework Circuit Boards	https://www.youtube.com/watch?v=C88ni0huwhw	2016.10.27	All	Hardware	Instruction	Spindle Tool	n/a
	Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software	https://www.youtube.com/watch?v=KIGeQmXNbNE	2016.10.17	All	All	Demonstration	n/a	n/a
	Table Arm (X-Arm) Block Adjustment	https://www.youtube.com/watch?v=ImMo3V1D70w	2016.10.14	Non-Hydras	Hardware	Maintenance	All	n/a
	MK1-250 Overview	https://www.youtube.com/watch?v=yaCYFmoIESk	2016.10.14	All	Hardware	Instruction	MK1-250	n/a
	MK1-450 Overview	https://www.youtube.com/watch?v=UvZMecXsHEM	2016.10.14	All	Hardware	Instruction	MK1-450	n/a
	MK2-250 Overview	https://www.youtube.com/watch?v=SOGKeU3vLbs	2016.10.14	All	Hardware	Instruction	MK2-250	n/a
	Hyrel3D Replacing the Heated Build Platform	https://www.youtube.com/watch?v=FkJT3ILlAHw	2016.10.03	All	Hardware	Instruction	HotBed	n/a
	Multi Head Printing - Nested STLs	https://www.youtube.com/watch?v=3KwJ6OgOx14	2016.	All	Software	Instruction	All	n/a
	X-Axis Belt Tightening	https://www.youtube.com/watch?v=4GYWfMrs0F8	2016.09.22	S30, ESR	Hardware	Maintenance	All	n/a
	Y-Axis Belt Tightening	https://www.youtube.com/watch?v=IkgviAGep-c	2016.09.21	S30, ESR	Hardware	Maintenance	All	n/a
	Plasma Magnetic Vortex Deposition	https://www.youtube.com/watch?v=lQy25Nlj3_Q	2016.09.21	Any	Hardware	Demonstration	EMO-HV	n/a
	3D Milling on the Hydra Series	https://www.youtube.com/watch?v=LQb5vS97jFo	2016.09.02	Hydra	Hardware	Demonstration	ST1 Spindle Tool	n/a
	Introducing the Hydra 640 (formerly Model 16A)	https://www.youtube.com/watch?v=81sVBZOOcbw	2016.08.05	Hydra	Hardware	Introduction	Any	n/a
	USBB Jumper Instructions	https://www.youtube.com/watch?v=uPqr4S0WC3Q	2016.07.19	S30M, ESR, EHR	Hardware	Instruction	Any	n/a
	Size Does Matter	https://www.youtube.com/watch?v=Rw2E_d-q9bQ	2016.07.11	Hydra Series	Hardware	Introduction	Any	n/a
	Print Heads Overview	https://www.youtube.com/watch?v=xGriCCrfkuw	2016.006.16	Any	Hardware	Overview	Print Heads	n/a
	Session 2F - Loading and Printing with Filaments, MK-Series Heads	https://www.youtube.com/watch?v=QMyuKdgiWI4	2016.0	Any	Hardware	Instruction	MK Series	n/a
	MK1-250 PEEK Nozzle Assembly	https://www.youtube.com/watch?v=ysO8oAzFwC4	2016.0	Any	Hardware	Instruction	MK1-250, MK2-250	n/a
	New Hydra Printer Line Intro	https://www.youtube.com/watch?v=BoHRC9m5nlQ	2016.03.28	Hydra	Hardware	Introduction	Any	n/a
	Bioplotting for under $10K	https://www.youtube.com/watch?v=XREWb_Md5o0	2016.02.17	Any	Hardware	Introduction	SDS Series	n/a
	Programming Head Offsets	https://www.youtube.com/watch?v=9zxxBYbdlOE	2016.02.17	All	Software	Instruction	Any	n/a
	Slicing for a Two-Material Print	https://www.youtube.com/watch?v=nfIvS50zLyc	2016.02.17	Any	Software	Instruction	Any	n/a
	Loading Filament and Printing with the Hyrel3D MK2-250	https://www.youtube.com/watch?v=0dS3bC0BnRQ	2016.02.09	Any	Hardware	Instruction	MK2-250	n/a
	Loading Filament and Printing with the Hyrel3D MK1-250	https://www.youtube.com/watch?v=v2ifSlZ0qEw	2016.02.08	Any	Hardware	Instruction	MK1-250	n/a
	Loading and Printing with the EMO-25 Print Head	https://www.youtube.com/watch?v=q-DbAbNMW48	2016.02.04	Any	Hardware	Instruction	EMO-25	n/a
	SDS RTV Instructions, v2	https://www.youtube.com/watch?v=ej55bZXrltA	2016.02.04	Any	Hardware	Instruction	SDS Series	RTV
	Intro to Hyrel Possibilities - Jan 2016	https://www.youtube.com/watch?v=MwrhV74NjCQ	2016.01.25	All	Hardware	Overview	All	n/a
	MK2-250 Dual Drive for Flexible Filaments	https://www.youtube.com/watch?v=V_zCytnGvvo	2016.01.20	Any	Hardware	Introduction	MK2-250	n/a
	6w, 450nm Laser Test	https://www.youtube.com/watch?v=O1IGa-8y9yQ	2016.01.14	Any	Hardware	Demonstration	LA6-450	n/a
	SDS RTV Instructions, v1	https://www.youtube.com/watch?v=0JJp7HeK35M	2016.01.14	Any	Hardware	Instructions	SDS Series	n/a
	Introducing the SDS Print Heads	https://www.youtube.com/watch?v=XKHa1CXnSdI	2016.01.08	Any	Hardware	Introduction	SDS Series	n/a
	Sneak Peek: Pick and Place Prototype	https://www.youtube.com/watch?v=BlSGlOpyipI	2016.01.05	Hydra	Hardware	Introduction	PNP Pick and Place	n/a
	LA6-450: 6w, 450nm Diode Laser Head	https://www.youtube.com/watch?v=OceUiuTixPA	2015.12.22	Any	Hardware	Introduction	LA6-450	n/a
	3D Printing RTV Silicone	https://www.youtube.com/watch?v=vmw0LS_f9V0	2015.12.18	Any	Hardware	Demonstration	SDS-Series	n/a
	Loading the VCD-25	https://www.youtube.com/watch?v=YWe3TQGgNW0	2015.12.09	Any	Hardware	Instruction	VCD-25	n/a
	Short Porcelain Print Demo	https://www.youtube.com/watch?v=huJuexTLbYA	2015.12.08	Any	Hardware	Demonstration	EMO-25	n/a
	Replacing the Tablet Interface Board	https://www.youtube.com/watch?v=b583I7AlGJI	2015.11.25	System 30M, Engine HR	Hardware	Instruction	n/a	n/a
	2016 Design Contest Video	https://www.youtube.com/watch?v=ZKAzXoJ0q8Y	2015.11.17	System 30M	Hardware	Contest	All	n/a
	DXF to Laser Gcode Generation	https://www.youtube.com/watch?v=YRsyEGHyt3k	2015.10.20	Any	Software	Instruction	Laser, Spindle Tool	n/a
	Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)	https://www.youtube.com/watch?v=Om9cjxMXuxY	2015.09.29	Any	Hardware	Demonstration	MK1-450	n/a
	Healing with MeshLab	https://www.youtube.com/watch?v=IreaoCfQ8mE	2015.09.01	Any	Software	Instruction	Any	n/a
	Postprocessing with a Heat Gun	https://www.youtube.com/watch?v=0Aj9WCabPgw	2015.08.17	Any	Hardware	Instruction	Any	n/a
	Introduction to Hyrel 3D Possibilities, 2015	https://www.youtube.com/watch?v=4oxCqR_DVNQ	2015.08.11	All	Hardware	Introduction	All	n/a
	Updating to Repetrel 2 4xx	https://www.youtube.com/watch?v=n4QwiuQtjO0	2015.08.06	All	Software	Instruction	n/a	n/a
	Updating your 407 Motion Controller	https://www.youtube.com/watch?v=cFAFRkpLmww	2015.07.24	All	Software	Instruction	n/a	n/a
	Leveling the X-Arm on System 30M, Engine SR	https://www.youtube.com/watch?v=0gFX6Mh-ths	2015.06.02	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Correcting Y-Arm Flexation Fix on the System 30M, Engine SR	https://www.youtube.com/watch?v=LZd0ecogGlQ	2015.03.18	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Manually Setting the Z-Zero Position	https://www.youtube.com/watch?v=ArDX4UpflmE	2015.03.09	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Picking Right 3D Printer For You	https://www.youtube.com/watch?v=vc9gBZtUL7c	2015.02.08	All	Hardware	Overview	All	n/a
	Laser Test Print	https://www.youtube.com/watch?v=yEePz8_0ttc	2015.02.17	All	Hardware	Demonstration	LA5-808 Diode Laser	n/a
	EMO Series Printing Tips	https://www.youtube.com/watch?v=tLHpaePTP-k	2015.02.10	All	Hardware	Instruction	EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)	n/a
	Multi-Head Calibration Guide	https://www.youtube.com/watch?v=IQscrgv6uaQ	2015.02.03	Any	Hardware/Software	Instruction	Any	n/a
	LA5-808 "Shark V" Diode Laser	https://www.youtube.com/watch?v=0lpa4nENtyQ	2015.01.14	Any	Hardware	Introduction	LA5-808	n/a
	Luer Tip Kit for EMO and SDS Series Print Heads	https://www.youtube.com/watch?v=mPYPWjnDGho	2014.12.23	Any	Hardware	Introduction	LTK	n/a
	Print Head SDK	https://www.youtube.com/watch?v=-VHxf182fIs	2014.12.09	All	Hardware, Software	Introduction	SDK	n/a
	Loading the EMO-type Reservoirs	https://www.youtube.com/watch?v=4yuzpUqeE-Y	2014.04.23	ALL	Hardware	Instruction	EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2	n/a
	Changing the Economics of 3D Printing	https://www.youtube.com/watch?v=xQFacnpzmv0	2013.12.24	All	Hardware	Demonstration	n/a	n/a
	System 30 Product Release	https://www.youtube.com/watch?v=c9HvQ3SepoM	2013.10.29	System 30	Hardware, Software	Introduction	n/a	n/a
	Simultaneous 3D Printing of Multiple Parts	https://www.youtube.com/watch?v=P6aMBQSZPgg	2013.07.02	All	Hardware, Software	Demonstration	MK1-250	n/a
	3D Printing with Sugru The Amazing Self-Setting Rubber	https://www.youtube.com/watch?v=nuii5rP53Js	2013.06.19	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Play-Doh	https://www.youtube.com/watch?v=dihvAQR7LQg	2013.06.04	All	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Plasticine	https://www.youtube.com/watch?v=cw8XiW46G0k	201.04.13	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Air-Dry Modeling Clay	https://www.youtube.com/watch?v=trdz4YDbdsw	2013.04.06	Any	Hardware	Demonstration	EMO-25	n/a
	Interchangeable Hot-Swappable Heads	https://www.youtube.com/watch?v=XNwv7Dw_Zwg	2013.05.12	Any	Hardware, Software	Demonstration	MK1-250	n/a
	Thank you, Kickstarters!	https://www.youtube.com/watch?v=mu9xMmkZFns	2012.11.05	All	Hardware, Software	Thank You	n/a	n/a
	Quick Tour of our Main Shop!	https://www.youtube.com/watch?v=Z9rgkw5r4l4	2012.10.17	All	Introduction	Thank You	n/a	n/a