Videos

Table of Videos

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

The following chart compares and contrasts the various heads:

http://hyrel3d.net/wiki/index.php/Main_Page#Comparison

2020

Table of Video Links, 2020

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	The Hyrel Hydra Electrical Panel, Explained	16A	n/a
	Making DXFs from Camera Images	All	Lasers
	Viscotec Vipro HEAD-3 on Hyrel	All	Viscotec
	Explaining the NEW RSD-30	All	Reservoirs
	Making DXFs from CAD Models	All	Lasers
	4th/5th Axis Installation and Setup	16A	All
	3-Phase Spindle Tool Installation and Setup	16A	Spindles
	Clench/Pinch Valve Installation and Setup	All	Reservoirs
	Dynamic Mixing Head Installation and Setup	All	Reservoirs
	EHR Electronics Access	EHR	n/a
	ESR Unboxing and Setup	ESR	n/a
	RSD-30 Refrigerated Syringe Dispenser	All	Reservoirs
	Printing on PEI	All	Filaments
	Printing Cememtitious Materials at TN Tech	All	Reservoirs
	Tightening set screws for Hydra X-axis	16A	n/a
	Interview on GA Mfg News	All	All
	Hyrel V4 Install No. 9: Licensing	All	All
	Hyrel V4 Install No. 8: Recipes	All	All
	Hyrel V4 Install No. 7: Settings	All	All
	Hyrel V4 Install No. 6`: Firmware	All	All
	Hyrel V4 Install No. 5: Drivers	All	All
	Hyrel V4 Install No. 4: Repetrel	All	All
	Hyrel V4 Install No. 3: Adobe Reader	All	All
	Hyrel V4 Install No. 2: Ecosystem Apps	All	All
	Hyrel V4 Install No. 1: Winrar	All	All
	Hydra 16AT - Tall	16A	All
	Hyrel Bulk Feeder for Cementitious Materials	16A	Reservoirs
	Using the new Precision Tool Setter on a Hyrel 3D Printer	16A	All

2019

Table of Video Links, 2020

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	RSD-30 - Refrigerated Syringe Dispenser	All	Reservoirs
	Heated & Chilled Vacuum Bed	16A, EHR	Reservoirs
	4th Axis Fun - Linear and Rotary Printing	16A	All
	CO2 Laser - Installation Instructions	16A	Lasers
	Dynamic Mixing Head DMH	All	Reservoirs
	Configuring Prusa Slicer for Multi-Material Support	All	Filaments
	Configuring the Prusa Slicer for Breakaway Support Material	All	Filaments
	How to Load Filament into a Hyrel 3D Print Head	All	Filaments
	Loading Print Heads into your Hyrel 3D Printer	All	All
	How to Calibrate the Z-Zero Position	16A, 30M, ESR	All
	Revised 2019: Hyrel 30M Initial Setup	30M	All
	How to select a Build Surface	All	Filaments
	How to Tram (level) the Hydra Bed	16A	All
	Laser Marking on a Cylinder	All	Lasers
	Five Axis Machining in Brass on a Hyrel Hydra	16A	Spindle
	Configuring your Hydra for a 3-phase Spindle Tool	16A	Spindle
	Five Axis Machining on a Hyrel Hydra (this gcode was used)	16A	Spindle
	Dispensing RTV Silicone on a Hyrel Hydra	All	Reservoirs
	Machining PTFE (Teflon) on a Hyrel Hydra	16A	Spindle
	Rotating Head Prototype	16A	Filaments
	Re-aligning the Gantry on the Hyrel Hydra 16A	16A	All

2018

Table of Video Links, 2020

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	Installing the new laser Power Supply in a Hyrel Hydra	16A	All
	Hyrel Tapping Enabled	16A	Spindle
	Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra	16A	Spindle
	Improved UV Light Source for more Powerful Crosslinking	All	Reservoirs
	How to install 4th and 5th Axes on a Hyrel Hydra	16A	All
	How to use an additional Yoke on a Hyrel Hydra	16A	All
	How to install an additional Yoke on a Hyrel Hydra	16A	All
	The Filament Dryer	All	Filaments
	Fourth and Fifth Axes Demo on a Hyrel Hydra	16A	All
	Installing a fourth axis on a Hyrel Hydra	16A	All
	Machining hotbeds to under 0.001"	16A	All
	Setting the Z-Offset on the EHR	EHR	All

2017

Table of Video Links, 2017

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	CO2 Laser Marking with the Hydra	16A	Lasers
	Converting a Hydra from Printer to Laser	16A	Lasers
	Cutting Nylon Mesh with CO2 Laser on a Hydra	16A	Lasers
	Chamber Temperature in a Cold Room	16A	Filaments
	Cutting acrylic with the CO2 Laser	16A	Lasers
	Tiny Heated Chilled Bed Preview	EHR	Reservoirs
	Fourth Axis Rotary Print	16A	Filaments
	Additive Manufacturing of Toroid Inductor for Electronics Applications	30M, ESR	Reservoirs
	Hyrel Hydra X and Y Belt Tension Adjustments	16A	Maintenance
	Hyrel Hydra Linear Bearing Adjustments	16A	Maintenance
	Hyrel Hydra Z Belt Tension Adjustments	16A	Maintenance
	Changing the Address Resistor on the CO2 Laser	16A	Maintenance
	CO2 Laser Alignment	16A	Calibration
	Hydra Yoke Adjustment	16A	Maintenance
	Hydra Yoke Angle Adjustment	16A	Maintenance
	Engnie, High Resolution (EHR) Setup, Part 2	EHR	Setup
	Engnie, High Resolution (EHR) Setup, Part 1	EHR	Setup
	EHR Scaffold Instructions	EHR	Setup
	EHR Scaffold Intro	EHR	Setup
	Unclogging a rare clogged MK1-250	All	Filaments
	Unclogging a rare clogged MK1-450	All	Filaments
	Flashing Firmware on the Modified CO2 Laser Controller	16A	Maintenance
	The Hyrel Hydra Family	16A	All
	High Resolution Engine Vacuum Bed	EHR	Reservoirs
	High Resolution Engine Setup	EHR	Setup
	SDS Clench Valve Assembly Instructions	All	Reservoirs
	How to Load the SDS Clench Valve	All	Reservoirs
	EHR Accuracy Test	EHR	Calibration
	Hydra 16A Controls Overview	16A	All
	Using Low Temperature Solder Paste to connect a Flat Flex Cable	30M, ESR	Assembly
	Draining Laser Coolant on the Hyrel Hydra	16A	Lasers
	Hydra Home Calibration Details	16A	Calibration
	Replacing the top component on an SDS Head Assembly
	HYDRA Hot Bed Installation
	Hydra Model Startup	All	Reservoirs
	Unboxing the Hydra Floor Model Units	16A	Setup
	Hydra Overview by CTO Karl Gifford	16A	All
	How to Manage the Pick-and-Place with Repetrel Software	16A	Pick-and-Place
	Hyrel Hydra Versitility	16A	All
	Hydra Vinyl Cutter Overview	16A	Cutting
	Hyrel 3D Hydra Pick-and-Place Introduction	16A	Pick-and-Place
	The Hyrel3D Hydra Line	16A	All
	Tramming the bed on the 16A	16A	Maintenance
	The Benefits of Microscope Inspection During Printing	All	Microscopes
	Printing PLGA for internal Biological Applications	All	Reservoirs

2016

Table of Video Links, 2016

Thumbnail	Title	Link	Date	Model	Category	Details	Details	Details
	Varialble Width Conductive Paste Extrusion	https://www.youtube.com/watch?v=z4IGQ5JMP6g	2016.12.30	All	Hardware	Introduction	Emulsion	n/a
	Microscope Print View Setup	https://www.youtube.com/watch?v=2f5FEhVsqy8	2016.12.30	All	Hardware	Maintenance	All	n/a
	Replacing the LED Strip	https://www.youtube.com/watch?v=D2sWEYRVAII	2016.12.23	System 30M	Hardware	Maintenance	LEDs	n/a
	Replacing the Front Switch Panel	https://www.youtube.com/watch?v=14ynZ3DHzVg	2016.12.23	System 30M	Hardware	Maintenance	Switch Panel	n/a
	Static Mixing Head Explained - v2 Including SDS Heads	https://www.youtube.com/watch?v=DQj6oLfrbLo	2016.12.20	All	Hardware	Introduction	Emulsion	n/a
	Hot Bed Manufacturing	https://www.youtube.com/watch?v=_vJXnB-8JII	2016.12.16	Hydra	Hardware	Instruction	All	HotBed
	Static Mixing Head Explained	https://www.youtube.com/watch?v=3azICOBuHdk	2016.12.15	MODEL	Hardware	Instruction	Emulsion	Static Mixing
	Timelapse Recording	https://www.youtube.com/watch?v=6qJ-2uFt-_Y	2016.12.06	All	Software	Instruction	n/a	n/a
	HotHead LEDs Explained	https://www.youtube.com/watch?v=ROpcvqS_r8s	2016.12.06	All	Hardware	Instruction	All	LEDs
	LA6-450 and LA5-808 Laser Overview	https://www.youtube.com/watch?v=Tz6mRSkOaSk	2016.12.02	LA5-808, LA6-450	Hardware	Instruction	Laser	n/a
	SDS and CSD Overview	https://www.youtube.com/watch?v=h95IurET7UM	2016.11.29	SDS, CSD	Hardware	Instruction	Emulsion	n/a
	Quiet Storm Cooling Fan Overview	https://www.youtube.com/watch?v=4B9hoMLNOuQ	2016.11.28	QS	Hardware	Overview	Filament	n/a
	VOL-25 and VCD-25 Overview	https://www.youtube.com/watch?v=9_onCKhT_dg	2016.11.28	VOL-25, VCD-25	Hardware	Overview	Emulsion	n/a
	KRA-15 and KCD-15 Overview	https://www.youtube.com/watch?v=QD2FrZ4kg1g	2016.11.28	KRA-15, KCD-15	Hardware	Overview	Emulsion	n/a
	Hydra 640 (16A) Two Part Test Print	https://www.youtube.com/watch?v=Rc2UFwjUtc4	2016.11.23	Hydra (All)	Hardware	Demonstration	Filament	n/a
	Extrusion Prototype Print	https://www.youtube.com/watch?v=Ql1NZLWVJQM	2016.11.23	Hydra 640	Hardware	Demonstration	Filament	n/a
	EMO-25 and COD-25 Overview	https://www.youtube.com/watch?v=ktK256u0sN8	2016.11.17	EMO-25, COD-25	Hardware	Overview	Emulsion	n/a
	Session 3C Slicing for Multiple Head Support	https://www.youtube.com/watch?v=Vn8jnvwh5to	2016.11.15	Any	Software	Slicing	Any	n/a
	Session 3A - Setting Two Heads to Z-Zero	https://www.youtube.com/watch?v=p1Ihd4ETxhg	2016.11.14	All	Software	Instruction	All	n/a
	Session 3B - Calibrating the Offset Between Two Heads	https://www.youtube.com/watch?v=FCuSvQm6ej4	2016.11.14	All	Software	Instruction	All	n/a
	Session 2D - Editing Slic3r Recipes	https://www.youtube.com/watch?v=dkQpsJWRI4Y	2016.11.109	All	Software	Instruction	All	n/a
	Session 2E - Slicing your STL and Viewing your GCODE	https://www.youtube.com/watch?v=kJc9sNlV0fA	2016.11.09	All	Software	Instruction	All	n/a
	Session 2C - Positioning, Scaling, and Rotating your STL	https://www.youtube.com/watch?v=IQbgGwiGVZA	2016.	All	Software	Instruction	All	n/a
	Session 1A - Hardware and Software Overview	https://www.youtube.com/watch?v=mVyCq7CPGLg	2016.11.03	All	Software	Instruction	All	n/a
	Session 1B - Communications and Bed Leveling	https://www.youtube.com/watch?v=2tIHw_JIQAI	2016.11.02	All	Software	Instruction	All	n/a
	Session 1C - Printing with Plasticine	https://www.youtube.com/watch?v=lFATCfKJf4I	2016.11.02	All	Software	Instruction	All	n/a
	Session 2A: Simple CAD Modeling in FreeCAD	https://www.youtube.com/watch?v=2yHRuef29L4	2016.08.24	All	Software	Instruction	All	n/a
	Session 2B - Healing an STL in MeshLab	https://www.youtube.com/watch?v=eLGIRAgLz4w	2016.08.17	All	Software	Instruction	All	n/a
	PC to Printer Connectivity	https://www.youtube.com/watch?v=RlJqdhtpB6Q	2016.11.01	All	Software	Instruction	All	n/a
	Using the Spindle Tool to rework Circuit Boards	https://www.youtube.com/watch?v=C88ni0huwhw	2016.10.27	All	Hardware	Instruction	Spindle Tool	n/a
	Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software	https://www.youtube.com/watch?v=KIGeQmXNbNE	2016.10.17	All	All	Demonstration	n/a	n/a
	Table Arm (X-Arm) Block Adjustment	https://www.youtube.com/watch?v=ImMo3V1D70w	2016.10.14	Non-Hydras	Hardware	Maintenance	All	n/a
	MK1-250 Overview	https://www.youtube.com/watch?v=yaCYFmoIESk	2016.10.14	All	Hardware	Instruction	MK1-250	n/a
	MK1-450 Overview	https://www.youtube.com/watch?v=UvZMecXsHEM	2016.10.14	All	Hardware	Instruction	MK1-450	n/a
	MK2-250 Overview	https://www.youtube.com/watch?v=SOGKeU3vLbs	2016.10.14	All	Hardware	Instruction	MK2-250	n/a
	Replacing the 30M/ESR Heated Build Platform	https://www.youtube.com/watch?v=FkJT3ILlAHw	2016.10.03	All	Hardware	Instruction	HotBed	n/a
	Multi Head Printing - Nested STLs	https://www.youtube.com/watch?v=3KwJ6OgOx14	2016.09.22	All	Software	Instruction	All	n/a
	X-Axis Belt Tightening	https://www.youtube.com/watch?v=4GYWfMrs0F8	2016.09.22	S30, ESR	Hardware	Maintenance	All	n/a
	Y-Axis Belt Tightening	https://www.youtube.com/watch?v=IkgviAGep-c	2016.09.21	S30, ESR	Hardware	Maintenance	All	n/a
	Plasma Magnetic Vortex Deposition (ElectroSpinning)	https://www.youtube.com/watch?v=lQy25Nlj3_Q	2016.09.21	Any	Hardware	Demonstration	EMO-HV	n/a
	3D Milling on the Hydra Series	https://www.youtube.com/watch?v=LQb5vS97jFo	2016.09.02	Hydra	Hardware	Demonstration	ST1 Spindle Tool	n/a
	Introducing the Hydra 640 (formerly Model 16A)	https://www.youtube.com/watch?v=81sVBZOOcbw	2016.08.05	Hydra	Hardware	Introduction	Any	n/a
	USBB Jumper Instructions	https://www.youtube.com/watch?v=uPqr4S0WC3Q	2016.07.19	S30M, ESR, EHR	Hardware	Instruction	Any	n/a
	Size Does Matter	https://www.youtube.com/watch?v=Rw2E_d-q9bQ	2016.07.11	Hydra Series	Hardware	Introduction	Any	n/a
	Print Heads Overview	https://www.youtube.com/watch?v=xGriCCrfkuw	2016.006.16	Any	Hardware	Overview	Print Heads	n/a
	Session 2F - Loading and Printing with Filaments, MK-Series Heads	https://www.youtube.com/watch?v=QMyuKdgiWI4	2016.06.03	Any	Hardware	Instruction	MK Series	n/a
	MK1-250 PEEK Nozzle Assembly	https://www.youtube.com/watch?v=ysO8oAzFwC4	2016.05.02	Any	Hardware	Instruction	MK1-250, MK2-250	n/a
	New Hydra Printer Line Intro	https://www.youtube.com/watch?v=BoHRC9m5nlQ	2016.03.28	Hydra	Hardware	Introduction	Any	n/a
	Bioplotting for under $10K	https://www.youtube.com/watch?v=XREWb_Md5o0	2016.02.17	Any	Hardware	Introduction	SDS Series	n/a
	Programming Head Offsets	https://www.youtube.com/watch?v=9zxxBYbdlOE	2016.02.17	All	Software	Instruction	Any	n/a
	Slicing for a Two-Material Print	https://www.youtube.com/watch?v=nfIvS50zLyc	2016.02.17	Any	Software	Instruction	Any	n/a
	Loading Filament and Printing with the Hyrel3D MK2-250	https://www.youtube.com/watch?v=0dS3bC0BnRQ	2016.02.09	Any	Hardware	Instruction	MK2-250	n/a
	Loading Filament and Printing with the Hyrel3D MK1-250	https://www.youtube.com/watch?v=v2ifSlZ0qEw	2016.02.08	Any	Hardware	Instruction	MK1-250	n/a
	Loading and Printing with the EMO-25 Print Head	https://www.youtube.com/watch?v=q-DbAbNMW48	2016.02.04	Any	Hardware	Instruction	EMO-25	n/a
	SDS RTV Instructions, v2	https://www.youtube.com/watch?v=ej55bZXrltA	2016.02.04	Any	Hardware	Instruction	SDS Series	RTV
	Intro to Hyrel Possibilities - Jan 2016	https://www.youtube.com/watch?v=MwrhV74NjCQ	2016.01.25	All	Hardware	Overview	All	n/a
	MK2-250 Dual Drive for Flexible Filaments	https://www.youtube.com/watch?v=V_zCytnGvvo	2016.01.20	Any	Hardware	Introduction	MK2-250	n/a
	6w, 450nm Laser Test	https://www.youtube.com/watch?v=O1IGa-8y9yQ	2016.01.14	Any	Hardware	Demonstration	LA6-450	n/a
	SDS RTV Instructions, v1	https://www.youtube.com/watch?v=0JJp7HeK35M	2016.01.14	Any	Hardware	Instructions	SDS Series	n/a
	Introducing the SDS Print Heads	https://www.youtube.com/watch?v=XKHa1CXnSdI	2016.01.08	Any	Hardware	Introduction	SDS Series	n/a
	Sneak Peek: Pick and Place Prototype	https://www.youtube.com/watch?v=BlSGlOpyipI	2016.01.05	Hydra	Hardware	Introduction	PNP Pick and Place	n/a

2012-2015

Table of Video Links, 2012-2015

Thumbnail	Title	Link	Date	Model	Category	Activity	Material Type	Other
	LA6-450: 6w, 450nm Diode Laser Head	https://www.youtube.com/watch?v=OceUiuTixPA	2015.12.22	Any	Hardware	Introduction	LA6-450	n/a
	3D Printing RTV Silicone	https://www.youtube.com/watch?v=vmw0LS_f9V0	2015.12.18	Any	Hardware	Demonstration	SDS-Series	n/a
	Loading the VCD-25	https://www.youtube.com/watch?v=YWe3TQGgNW0	2015.12.09	Any	Hardware	Instruction	VCD-25	n/a
	Short Porcelain Print Demo	https://www.youtube.com/watch?v=huJuexTLbYA	2015.12.08	Any	Hardware	Demonstration	EMO-25	n/a
	Replacing the Tablet Interface Board	https://www.youtube.com/watch?v=b583I7AlGJI	2015.11.25	System 30M, EHR	Hardware	Instruction	n/a	n/a
	2016 Design Contest Video	https://www.youtube.com/watch?v=ZKAzXoJ0q8Y	2015.11.17	System 30M	Hardware	Contest	All	n/a
	DXF to Laser Gcode Generation	https://www.youtube.com/watch?v=YRsyEGHyt3k	2015.10.20	Any	Software	Instruction	Laser, Spindle Tool	n/a
	Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)	https://www.youtube.com/watch?v=Om9cjxMXuxY	2015.09.29	Any	Hardware	Demonstration	MK1-450	n/a
	Healing with MeshLab	https://www.youtube.com/watch?v=IreaoCfQ8mE	2015.09.01	Any	Software	Instruction	Any	n/a
	Postprocessing with a Heat Gun	https://www.youtube.com/watch?v=0Aj9WCabPgw	2015.08.17	Any	Hardware	Instruction	Any	n/a
	Introduction to Hyrel 3D Possibilities, 2015	https://www.youtube.com/watch?v=4oxCqR_DVNQ	2015.08.11	All	Hardware	Introduction	All	n/a
	Updating to Repetrel 2 4xx	https://www.youtube.com/watch?v=n4QwiuQtjO0	2015.08.06	All	Software	Instruction	n/a	n/a
	Updating your 407 Motion Controller	https://www.youtube.com/watch?v=cFAFRkpLmww	2015.07.24	All	Software	Instruction	n/a	n/a
	Replacing the HOTHEAD controller	https://www.youtube.com/watch?v=XKCEkKSolZc	2015.07.23	All	Hardware	Instruction	n/a	n/a
	Programming the HOTBED controller on the System 30M and ESR	https://www.youtube.com/watch?v=yM8QMZBTb4o	2015.07.22	All	Software	Instruction	n/a	n/a
	Printing with Cloning - three heads in Parallel	https://www.youtube.com/watch?v=cuRcIE-Jbyc	2015.07.21	All	Software	Instruction	n/a	n/a
	Older Instructions, Slicing for Multiple Head Support	https://www.youtube.com/watch?v=VMyS3h4qiSA	2015.07.17	All	Software	Slicing	Any	n/a
	Leveling the X-Arm on System 30M, Engine SR	https://www.youtube.com/watch?v=0gFX6Mh-ths	2015.06.02	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Correcting Y-Arm Flexation Fix on the System 30M, Engine SR	https://www.youtube.com/watch?v=LZd0ecogGlQ	2015.03.18	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Manually Setting the Z-Zero Position	https://www.youtube.com/watch?v=ArDX4UpflmE	2015.03.09	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Picking Right 3D Printer For You	https://www.youtube.com/watch?v=vc9gBZtUL7c	2015.02.08	All	Hardware	Overview	All	n/a
	Changing the Main I/O Board, System 30M, ESR	https://www.youtube.com/watch?v=66S9XJ-KeU8	2015.02.12	All	Hardware	Overview	All	Spine
	Laser Test Print	https://www.youtube.com/watch?v=yEePz8_0ttc	2015.02.17	All	Hardware	Demonstration	LA5-808 Diode Laser	n/a
	EMO Series Printing Tips	https://www.youtube.com/watch?v=tLHpaePTP-k	2015.02.10	All	Hardware	Instruction	EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)	n/a
	Changing Power Supplies in the 30M and ESR	https://www.youtube.com/watch?v=Zl1sqy6PWx8	2015.02.04	30M, ESR	Hardware	Instruction	Any	n/a
	Multi-Head Calibration Guide	https://www.youtube.com/watch?v=IQscrgv6uaQ	2015.02.03	Any	Hardware/Software	Instruction	Any	n/a
	LA5-808 "Shark V" Diode Laser	https://www.youtube.com/watch?v=0lpa4nENtyQ	2015.01.14	Any	Hardware	Introduction	LA5-808	n/a
	Luer Tip Kit for EMO and SDS Series Print Heads	https://www.youtube.com/watch?v=mPYPWjnDGho	2014.12.23	Any	Hardware	Introduction	LTK	n/a
	Print Head SDK	https://www.youtube.com/watch?v=-VHxf182fIs	2014.12.09	All	Hardware, Software	Introduction	SDK	n/a
	MK Series Printing Tips	https://www.youtube.com/watch?v=Fg9omXlYR-Q	2014.11.12	All	Procedure	Instruction	MK Series	n/a
	Replacing fuses (old) on the Yoke	https://www.youtube.com/watch?v=EosKDe-SyUI	2014.08.27	ALL	Hardware	Instruction	All	n/a
	Loading the EMO-type Reservoirs	https://www.youtube.com/watch?v=4yuzpUqeE-Y	2014.04.23	ALL	Hardware	Instruction	EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2	n/a
	Changing the Economics of 3D Printing	https://www.youtube.com/watch?v=xQFacnpzmv0	2013.12.24	All	Hardware	Demonstration	n/a	n/a
	System 30M Product Release	https://www.youtube.com/watch?v=c9HvQ3SepoM	2013.10.29	System 30M	Hardware, Software	Introduction	n/a	n/a
	Simultaneous 3D Printing of Multiple Parts	https://www.youtube.com/watch?v=P6aMBQSZPgg	2013.07.02	All	Hardware, Software	Demonstration	MK1-250	n/a
	3D Printing with Sugru The Amazing Self-Setting Rubber	https://www.youtube.com/watch?v=nuii5rP53Js	2013.06.19	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Play-Doh	https://www.youtube.com/watch?v=dihvAQR7LQg	2013.06.04	All	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Plasticine	https://www.youtube.com/watch?v=cw8XiW46G0k	2013.04.13	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Air-Dry Modeling Clay	https://www.youtube.com/watch?v=trdz4YDbdsw	2013.04.06	Any	Hardware	Demonstration	EMO-25	n/a
	Interchangeable Hot-Swappable Heads	https://www.youtube.com/watch?v=XNwv7Dw_Zwg	2013.05.12	Any	Hardware, Software	Demonstration	MK1-250	n/a
	Thank you, Kickstarters!	https://www.youtube.com/watch?v=mu9xMmkZFns	2012.11.05	All	Hardware, Software	Thank You	n/a	n/a
	Quick Tour of our Main Shop!	https://www.youtube.com/watch?v=Z9rgkw5r4l4	2012.10.17	All	Introduction	Thank You	n/a	n/a