Videos

Table of Videos

Please also see the Instructions page and the Help page.

Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.

The following chart compares and contrasts the various heads:

http://hyrel3d.net/wiki/index.php/Main_Page#Comparison

2021

Table of Video Links, 2020

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	Etching Aluminum with 450 nm Diode Laser	any	LA6-450

2020

Table of Video Links, 2020

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	The Hyrel Hydra Electrical Panel, Explained	16A	n/a
	Making DXFs from Camera Images	All	Lasers
	Viscotec Vipro HEAD-3 on Hyrel	All	Viscotec
	Explaining the NEW RSD-30	All	Reservoirs
	Making DXFs from CAD Models	All	Lasers
	4th/5th Axis Installation and Setup	16A	All
	3-Phase Spindle Tool Installation and Setup	16A	Spindles
	Clench/Pinch Valve Installation and Setup	All	Reservoirs
	Dynamic Mixing Head Installation and Setup	All	Reservoirs
	EHR Electronics Access	EHR	n/a
	ESR Unboxing and Setup	ESR	n/a
	RSD-30 Refrigerated Syringe Dispenser	All	Reservoirs
	Printing on PEI	All	Filaments
	Printing Cememtitious Materials at TN Tech	All	Reservoirs
	Tightening set screws for Hydra X-axis	16A	n/a
	Interview on GA Mfg News	All	All
	Hyrel V4 Install No. 9: Licensing	All	All
	Hyrel V4 Install No. 8: Recipes	All	All
	Hyrel V4 Install No. 7: Settings	All	All
	Hyrel V4 Install No. 6`: Firmware	All	All
	Hyrel V4 Install No. 5: Drivers	All	All
	Hyrel V4 Install No. 4: Repetrel	All	All
	Hyrel V4 Install No. 3: Adobe Reader	All	All
	Hyrel V4 Install No. 2: Ecosystem Apps	All	All
	Hyrel V4 Install No. 1: Winrar	All	All
	Hydra 16AT - Tall	16A	All
	Hyrel Bulk Feeder for Cementitious Materials	16A	Reservoirs
	Using the new Precision Tool Setter on a Hyrel 3D Printer	16A	All

2019

Table of Video Links, 2019

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	RSD-30 - Refrigerated Syringe Dispenser	All	Reservoirs
	Heated & Chilled Vacuum Bed	16A, EHR	Reservoirs
	4th Axis Fun - Linear and Rotary Printing	16A	All
	CO2 Laser - Installation Instructions	16A	Lasers
	Dynamic Mixing Head DMH	All	Reservoirs
	Configuring Prusa Slicer for Multi-Material Support	All	Filaments
	Configuring the Prusa Slicer for Breakaway Support Material	All	Filaments
	How to Load Filament into a Hyrel 3D Print Head	All	Filaments
	Loading Print Heads into your Hyrel 3D Printer	All	All
	How to Calibrate the Z-Zero Position	16A, 30M, ESR	All
	Revised 2019: Hyrel 30M Initial Setup	30M	All
	How to select a Build Surface	All	Filaments
	How to Tram (level) the Hydra Bed	16A	All
	Laser Marking on a Cylinder	All	Lasers
	Five Axis Machining in Brass on a Hyrel Hydra	16A	Spindle
	Configuring your Hydra for a 3-phase Spindle Tool	16A	Spindle
	Five Axis Machining on a Hyrel Hydra (this gcode was used)	16A	Spindle
	Dispensing RTV Silicone on a Hyrel Hydra	All	Reservoirs
	Machining PTFE (Teflon) on a Hyrel Hydra	16A	Spindle
	Rotating Head Prototype	16A	Filaments
	Re-aligning the Gantry on the Hyrel Hydra 16A	16A	All

2018

Table of Video Links, 2018

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	Installing the new laser Power Supply in a Hyrel Hydra	16A	All
	Hyrel Tapping Enabled	16A	Spindle
	Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra	16A	Spindle
	Improved UV Light Source for more Powerful Crosslinking	All	Reservoirs
	How to install 4th and 5th Axes on a Hyrel Hydra	16A	All
	How to use an additional Yoke on a Hyrel Hydra	16A	All
	How to install an additional Yoke on a Hyrel Hydra	16A	All
	The Filament Dryer	All	Filaments
	Fourth and Fifth Axes Demo on a Hyrel Hydra	16A	All
	Installing a fourth axis on a Hyrel Hydra	16A	All
	Machining hotbeds to under 0.001"	16A	All
	Setting the Z-Offset on the EHR	EHR	All

2017

Table of Video Links, 2017

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	CO2 Laser Marking with the Hydra	16A	Lasers
	Converting a Hydra from Printer to Laser	16A	Lasers
	Cutting Nylon Mesh with CO2 Laser on a Hydra	16A	Lasers
	Chamber Temperature in a Cold Room	16A	Filaments
	Cutting acrylic with the CO2 Laser	16A	Lasers
	Tiny Heated Chilled Bed Preview	EHR	Reservoirs
	Fourth Axis Rotary Print	16A	Filaments
	Additive Manufacturing of Toroid Inductor for Electronics Applications	30M, ESR	Reservoirs
	Hyrel Hydra X and Y Belt Tension Adjustments	16A	Maintenance
	Hyrel Hydra Linear Bearing Adjustments	16A	Maintenance
	Hyrel Hydra Z Belt Tension Adjustments	16A	Maintenance
	Changing the Address Resistor on the CO2 Laser	16A	Maintenance
	CO2 Laser Alignment	16A	Calibration
	Hydra Yoke Adjustment	16A	Maintenance
	Hydra Yoke Angle Adjustment	16A	Maintenance
	Engnie, High Resolution (EHR) Setup, Part 2	EHR	Setup
	Engnie, High Resolution (EHR) Setup, Part 1	EHR	Setup
	EHR Scaffold Instructions	EHR	Setup
	EHR Scaffold Intro	EHR	Setup
	Unclogging a rare clogged MK1-250	All	Filaments
	Unclogging a rare clogged MK1-450	All	Filaments
	Flashing Firmware on the Modified CO2 Laser Controller	16A	Maintenance
	The Hyrel Hydra Family	16A	All
	High Resolution Engine Vacuum Bed	EHR	Reservoirs
	High Resolution Engine Setup	EHR	Setup
	SDS Clench Valve Assembly Instructions	All	Reservoirs
	How to Load the SDS Clench Valve	All	Reservoirs
	EHR Accuracy Test	EHR	Calibration
	Hydra 16A Controls Overview	16A	All
	Using Low Temperature Solder Paste to connect a Flat Flex Cable	30M, ESR	Assembly
	Draining Laser Coolant on the Hyrel Hydra	16A	Lasers
	Hydra Home Calibration Details	16A	Calibration
	Replacing the top component on an SDS Head Assembly
	HYDRA Hot Bed Installation
	Hydra Model Startup	All	Reservoirs
	Unboxing the Hydra Floor Model Units	16A	Setup
	Hydra Overview by CTO Karl Gifford	16A	All
	How to Manage the Pick-and-Place with Repetrel Software	16A	Pick-and-Place
	Hyrel Hydra Versitility	16A	All
	Hydra Vinyl Cutter Overview	16A	Cutting
	Hyrel 3D Hydra Pick-and-Place Introduction	16A	Pick-and-Place
	The Hyrel3D Hydra Line	16A	All
	Tramming the bed on the 16A	16A	Maintenance
	The Benefits of Microscope Inspection During Printing	All	Microscopes
	Printing PLGA for internal Biological Applications	All	Reservoirs

2016

Table of Video Links, 2016

Video Link	Subject	Applicable Model(s)	Applicable Head(s)
	Varialble Width Conductive Paste Extrusion
	Microscope Print View Setup
	Replacing the LED Strip
	Replacing the Front Switch Panel
	Static Mixing Head Explained - v2 Including SDS Heads
	Hot Bed Manufacturing
	Static Mixing Head Explained
	Timelapse Recording
	HotHead LEDs Explained
	LA6-450 and LA5-808 Laser Overview
	SDS and CSD Overview
	Quiet Storm Cooling Fan Overview
	VOL-25 and VCD-25 Overview
	KRA-15 and KCD-15 Overview
	Hydra 640 (16A) Two Part Test Print
	Extrusion Prototype Print
	EMO-25 and COD-25 Overview
	Session 3C Slicing for Multiple Head Support
	Session 3A - Setting Two Heads to Z-Zero
	Session 3B - Calibrating the Offset Between Two Heads
	Session 2D - Editing Slic3r Recipes
	Session 2E - Slicing your STL and Viewing your GCODE
	Session 2C - Positioning, Scaling, and Rotating your STL
	Session 1A - Hardware and Software Overview
	Session 1B - Communications and Bed Leveling
	Session 1C - Printing with Plasticine
	Session 2A: Simple CAD Modeling in FreeCAD
	PC to Printer Connectivity
	Using the Spindle Tool to rework Circuit Boards
	Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software
	Table Arm (X-Arm) Block Awatchdjustment
	MK1-250 Overview
	MK1-450 Overview
	MK2-250 Overview
	Replacing the 30M/ESR Heated Build Platform
	Multi Head Printing - Nested STLs
	Y-Axis Belt Tightening
	Plasma Magnetic Vortex Deposition (ElectroSpinning)
	3D Milling on the Hydra Series
	Introducing the Hydra 640 (formerly Model 16A)
	USBB Jumper Instructions
	Size Does Matter
	Print Heads Overview
	Session 2F - Loading and Printing with Filaments, MK-Series Heads
	MK1-250 PEEK Nozzle Assembly
	New Hydra Printer Line Intro
	Bioplotting for under $10K
	Programming Head Offsets
	Slicing for a Two-Material Print
	Loading Filament and Printing with the Hyrel3D MK2-250
	Loading Filament and Printing with the Hyrel3D MK1-250
	Loading and Printing with the EMO-25 Print Head
	SDS RTV Instructions, v2
	Intro to Hyrel Possibilities - Jan 2016
	MK2-250 Dual Drive for Flexible Filaments
	6w, 450nm Laser Test
	SDS RTV Instructions, v1
	Introducing the SDS Print Heads
	Sneak Peek: Pick and Place Prototype

2012-2015

Table of Video Links, 2012-2015

Thumbnail	Title	Link	Date	Model	Category	Activity	Material Type	Other
	LA6-450: 6w, 450nm Diode Laser Head	https://www.youtube.com/watch?v=OceUiuTixPA	2015.12.22	Any	Hardware	Introduction	LA6-450	n/a
	3D Printing RTV Silicone	https://www.youtube.com/watch?v=vmw0LS_f9V0	2015.12.18	Any	Hardware	Demonstration	SDS-Series	n/a
	Loading the VCD-25	https://www.youtube.com/watch?v=YWe3TQGgNW0	2015.12.09	Any	Hardware	Instruction	VCD-25	n/a
	Short Porcelain Print Demo	https://www.youtube.com/watch?v=huJuexTLbYA	2015.12.08	Any	Hardware	Demonstration	EMO-25	n/a
	Replacing the Tablet Interface Board	https://www.youtube.com/watch?v=b583I7AlGJI	2015.11.25	System 30M, EHR	Hardware	Instruction	n/a	n/a
	2016 Design Contest Video	https://www.youtube.com/watch?v=ZKAzXoJ0q8Y	2015.11.17	System 30M	Hardware	Contest	All	n/a
	DXF to Laser Gcode Generation	https://www.youtube.com/watch?v=YRsyEGHyt3k	2015.10.20	Any	Software	Instruction	Laser, Spindle Tool	n/a
	Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)	https://www.youtube.com/watch?v=Om9cjxMXuxY	2015.09.29	Any	Hardware	Demonstration	MK1-450	n/a
	Healing with MeshLab	https://www.youtube.com/watch?v=IreaoCfQ8mE	2015.09.01	Any	Software	Instruction	Any	n/a
	Postprocessing with a Heat Gun	https://www.youtube.com/watch?v=0Aj9WCabPgw	2015.08.17	Any	Hardware	Instruction	Any	n/a
	Introduction to Hyrel 3D Possibilities, 2015	https://www.youtube.com/watch?v=4oxCqR_DVNQ	2015.08.11	All	Hardware	Introduction	All	n/a
	Updating to Repetrel 2 4xx	https://www.youtube.com/watch?v=n4QwiuQtjO0	2015.08.06	All	Software	Instruction	n/a	n/a
	Updating your 407 Motion Controller	https://www.youtube.com/watch?v=cFAFRkpLmww	2015.07.24	All	Software	Instruction	n/a	n/a
	Replacing the HOTHEAD controller	https://www.youtube.com/watch?v=XKCEkKSolZc	2015.07.23	All	Hardware	Instruction	n/a	n/a
	Programming the HOTBED controller on the System 30M and ESR	https://www.youtube.com/watch?v=yM8QMZBTb4o	2015.07.22	All	Software	Instruction	n/a	n/a
	Printing with Cloning - three heads in Parallel	https://www.youtube.com/watch?v=cuRcIE-Jbyc	2015.07.21	All	Software	Instruction	n/a	n/a
	Older Instructions, Slicing for Multiple Head Support	https://www.youtube.com/watch?v=VMyS3h4qiSA	2015.07.17	All	Software	Slicing	Any	n/a
	Leveling the X-Arm on System 30M, Engine SR	https://www.youtube.com/watch?v=0gFX6Mh-ths	2015.06.02	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Correcting Y-Arm Flexation Fix on the System 30M, Engine SR	https://www.youtube.com/watch?v=LZd0ecogGlQ	2015.03.18	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Manually Setting the Z-Zero Position	https://www.youtube.com/watch?v=ArDX4UpflmE	2015.03.09	System 30M, Engine SR	Hardware	Instruction	n/a	n/a
	Picking Right 3D Printer For You	https://www.youtube.com/watch?v=vc9gBZtUL7c	2015.02.08	All	Hardware	Overview	All	n/a
	Changing the Main I/O Board, System 30M, ESR	https://www.youtube.com/watch?v=66S9XJ-KeU8	2015.02.12	All	Hardware	Overview	All	Spine
	Laser Test Print	https://www.youtube.com/watch?v=yEePz8_0ttc	2015.02.17	All	Hardware	Demonstration	LA5-808 Diode Laser	n/a
	EMO Series Printing Tips	https://www.youtube.com/watch?v=tLHpaePTP-k	2015.02.10	All	Hardware	Instruction	EMO Series (EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2)	n/a
	Changing Power Supplies in the 30M and ESR	https://www.youtube.com/watch?v=Zl1sqy6PWx8	2015.02.04	30M, ESR	Hardware	Instruction	Any	n/a
	Multi-Head Calibration Guide	https://www.youtube.com/watch?v=IQscrgv6uaQ	2015.02.03	Any	Hardware/Software	Instruction	Any	n/a
	LA5-808 "Shark V" Diode Laser	https://www.youtube.com/watch?v=0lpa4nENtyQ	2015.01.14	Any	Hardware	Introduction	LA5-808	n/a
	Luer Tip Kit for EMO and SDS Series Print Heads	https://www.youtube.com/watch?v=mPYPWjnDGho	2014.12.23	Any	Hardware	Introduction	LTK	n/a
	Print Head SDK	https://www.youtube.com/watch?v=-VHxf182fIs	2014.12.09	All	Hardware, Software	Introduction	SDK	n/a
	MK Series Printing Tips	https://www.youtube.com/watch?v=Fg9omXlYR-Q	2014.11.12	All	Procedure	Instruction	MK Series	n/a
	Replacing fuses (old) on the Yoke	https://www.youtube.com/watch?v=EosKDe-SyUI	2014.08.27	ALL	Hardware	Instruction	All	n/a
	Loading the EMO-type Reservoirs	https://www.youtube.com/watch?v=4yuzpUqeE-Y	2014.04.23	ALL	Hardware	Instruction	EMO, COD, VOL, VCD, KRA, KCD, KR2, KC2	n/a
	Changing the Economics of 3D Printing	https://www.youtube.com/watch?v=xQFacnpzmv0	2013.12.24	All	Hardware	Demonstration	n/a	n/a
	System 30M Product Release	https://www.youtube.com/watch?v=c9HvQ3SepoM	2013.10.29	System 30M	Hardware, Software	Introduction	n/a	n/a
	Simultaneous 3D Printing of Multiple Parts	https://www.youtube.com/watch?v=P6aMBQSZPgg	2013.07.02	All	Hardware, Software	Demonstration	MK1-250	n/a
	3D Printing with Sugru The Amazing Self-Setting Rubber	https://www.youtube.com/watch?v=nuii5rP53Js	2013.06.19	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Play-Doh	https://www.youtube.com/watch?v=dihvAQR7LQg	2013.06.04	All	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Plasticine	https://www.youtube.com/watch?v=cw8XiW46G0k	2013.04.13	Any	Hardware	Demonstration	EMO-25	n/a
	3D Printing with Air-Dry Modeling Clay	https://www.youtube.com/watch?v=trdz4YDbdsw	2013.04.06	Any	Hardware	Demonstration	EMO-25	n/a
	Interchangeable Hot-Swappable Heads	https://www.youtube.com/watch?v=XNwv7Dw_Zwg	2013.05.12	Any	Hardware, Software	Demonstration	MK1-250	n/a
	Thank you, Kickstarters!	https://www.youtube.com/watch?v=mu9xMmkZFns	2012.11.05	All	Hardware, Software	Thank You	n/a	n/a
	Quick Tour of our Main Shop!	https://www.youtube.com/watch?v=Z9rgkw5r4l4	2012.10.17	All	Introduction	Thank You	n/a	n/a