Engines
Engine Models
The Engine is the unenclosed model, and may be configured as follows:
| Model | Engine SR Standard Resolution |
Engine HR High Resolution |
|---|---|---|
| Image | ||
| Heated Build Platform | yes | yes |
| Integrated Tablet PC | yes | yes |
| Initial Heads | 1 | 1 |
| Maximum Heads | 4 | 3 |
| X/Y-Axes Motion Control | Belts | Precision Ball Screws |
| Z-Axis Motion Control | Precision Ball Screw | Precision Ball Screw |
| Positional Resolution X / Y / Z in μm |
<10 / <10 / <1 | <1.25 / <1.25 / <1 |
| Positional Accuracy X / Y / Z in μm |
<50 / <50 / <10 | <12 / <12 / <10 |
| Positional Repeatability X / Y / Z in μm |
<25 / <25 / <5 | <12 / <12 / <5 |
| Precise X/Y Output for Bioplots |
100 μm lines 200 μm spacing |
50 μm lines 100 μm spacing |
| Precise Z output for Bioplots |
25 μm layers | 25 μm layers |
For reference, the initial Engine configurations were as follows:
| Model | E1 Tinkerer DISCONTINUED |
E2 Hobbyist DISCONTINUED |
E3 Apprentice SEE Engine SR |
E4 Journeyman DISCONTINUED |
E5 Professional DISCONTINUED |
|---|---|---|---|---|---|
| Heated Build Platform | no | yes | yes | yes | yes |
| Integrated PC & Touchscreen or Tablet PC |
no | no | yes | yes | yes |
| Initial Heads | 1 | 1 | 1 | 2 | 4 |
| Maximum Heads | 4 | 4 | 4 | 4 | 4 |
Technical Data
Adjustments
- Speed of travel (at slicing or in g-code editor)
- Layer thickness (at slicing)
- Volume of flow per unit distance (at slicing or in g-code editor)
- Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
- Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
- HotBed Temperature (at slicing, in g-code editor, or manually during build)
Or, is tabular better?
| Metric | Units | During Slicing | In G-Code Editor | GUI During Build |
|---|---|---|---|---|
| Speed of Travel | mm/min | yes | yes | no |
| Layer Thickness | mm | yes | no | no |
| Flow Rate | nL/sec | yes | yes | yes |
| Extruder Temperature | °C | yes | yes | yes |
| Fan Speed | % of max | yes | yes | yes |
| HotBed | °C | yes | yes | yes |