30M
Jump to navigation
Jump to search
The System 30M v2 is our leading enclosed, benchtop model.
History
This is our enclosed benchtop model.
- The System was introduced during our KickStarter campaign, and came with a 23" tall enclosure.
- The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure.
- The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
- The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request.
Technical Data
Technical specifications for printers currently shipping are detailed in the comparison chart on the Printer Overview page.
Adjustments
| Metric | Units | During Slicing | In G-Code Editor | GUI During Build |
|---|---|---|---|---|
| Speed of Travel | mm/min | yes | yes | no |
| Layer Thickness | mm | yes | no | no |
| Flow Rate | nL/sec | yes | yes | yes |
| Extruder Temperature | °C | yes | yes | yes |
| Fan Speed | % of max | yes | yes | yes |
| HotBed | °C | yes | yes | yes |