Table of Videos
Please also see:
Remember, you can CTRL+F to search for a keyword on this page! You can also click on a column header to sort by that column.
Note:
The following chart compares and contrasts the various printers:
https://hyrel3d.com/wiki/index.php/Printer_Overview
The following chart compares and contrasts the various heads:
https://hyrel3d.com/wiki/index.php/Head_Overview
Count
299 videos as of June 2024.
Table of Video Links, 2024
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
Table of Video Links, 2024
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
Setting up the Hyrel 3D H21 to print PEI (Ultem) in the Heated Chamber (up to 150C)
|
H21
|
FH2-450
|
|
Hyrel 3D H21 Heated Chamber (up to 150C) Instructions
|
H21
|
FH2-450
|
|
Tuskegee University prints on Hydra 21
|
H21
|
FH2-260
|
|
Surface Mapping Configuration on Hyrel 3D Software
|
H21
|
Probe
|
200px
|
Slicing a DXF to etch with a Hyrel 3D Diode Laser
|
Any
|
Lasers
|
200px
|
Hyrel3D: HEATED Small Volume Mixing Kit (SVMK) setup
|
Any
|
Reservoir
|
200px
|
Hyrel 3D: Dual RSD instructions
|
Any
|
Reservoir
|
279 videos as of Oct 2022
2023 (1)
Table of Video Links, 2021
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
200px
|
New-style Pick-and-Place Head Introduction
|
H21
|
PNP
|
2022 (23)
Table of Video Links, 2021
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
200px
|
Hyrel3D Bioprinting at the Food and Bioengineering Lab of TalTech, Estonia
|
EHR
|
Printing
|
200px
|
Additional Setup for new printers
|
All
|
n/a
|
200px
|
Technical University of Denmark printing on a Hyrel 3D Printer
|
ESR
|
Printing
|
200px
|
Creating Text Objects with Repetrel
|
All
|
n/a
|
200px
|
New Small Volume Mixing Kit
|
Any
|
SVMK, Microfluidics
|
200px
|
Integrating MATLAB with Repetrel
|
Any
|
Any
|
200px
|
Adjusting to avoid Elephant Foot with PCL and similar materials
|
Any
|
KR2, TAM
|
200px
|
Hyrel head lowering attachment
|
Any
|
Any
|
200px
|
Cleaning residue from the HIgh Torque KR2 cartridge
|
Any
|
HTK
|
200px
|
Scaling your print with the Hyrel Microscope
|
Any
|
Microscope
|
200px
|
Cleaning PCL, PLA, or PDO residue the Hyrel HTK cartridge of the KR2 head.
|
Any
|
Cleanup
|
200px
|
Using head offsets to change tool positions while leaving the output in the same location
|
Any
|
Calibration
|
200px
|
Demo setup and test: Pick-and-Place
|
H21
|
Configuration
|
200px
|
EHR Position Adjustment
|
EHR
|
Calibration
|
200px
|
Analyzing and calculating the porosity of scaffolds - Hyrel 3D
|
Any
|
Scaffolds
|
200px
|
Replacing big tree board on Z motor on Hydra 21.
|
H21
|
Maintenance
|
200px
|
How to prepare powdered material for use in Hyrel 3D's heated syringe heads.
|
All
|
Bio
|
200px
|
How to level the build platform on the new Hyrel 3D Hydra 21 printer.
|
H21
|
Maintenance
|
200px
|
How to measure the scale of biological scaffold prints.
|
All
|
Bio
|
200px
|
How to melt and print with PCL pellets with the Hyrel KR2 head.
|
All
|
Bio
|
200px
|
How to remove PCL scaffolds from PVC build surface.
|
All
|
Bio
|
200px
|
Hydra 21 Unboxing Instructions
|
H21
|
All
|
200px
|
Cirles, Arcs, Spirals, and Helixes: Hyrel's G2 and G3 gcode generation tool
|
All
|
All
|
2021 (44)
Table of Video Links, 2020
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
200px
|
Scaffolds: Adjusting the flow value (P/uL)
|
All
|
All
|
200px
|
Scaffolds: Adjusting the final retract (unprime)
|
All
|
All
|
200px
|
Scaffold Gradient: Speed and Z position Instructions
|
All
|
All
|
200px
|
Scaffold Gradient: Speed Instructions
|
All
|
All
|
200px
|
Scaffold Perimeters Tool
|
All
|
All
|
200px
|
Customizing Visualization in Repetrel
|
All
|
All
|
200px
|
Biogel Scaffold Speed Test
|
All
|
All
|
200px
|
Programming BigTree Drivers for Hyrel Printers
|
All
|
Flashing
|
200px
|
Using a USB Camera with Repetrel
|
All
|
Camera
|
|
Heated Nozzle Accessory
|
All
|
Reservoirs
|
200px
|
Scaffold Options in Repetrel
|
All
|
All
|
200px
|
Cleaning the Hyrel 3D DMH-2 Dynamic Mixing Head
|
All
|
Reservoir
|
200px
|
Calibrating Head Offsets for Hyrel 3D
|
All
|
All
|
200px
|
Hyrel 3D "Return Trip" Option for Scaffolds
|
All
|
Zebra Prints
|
200px
|
Hyrel 3D Viscosity Test Clean Up
|
All
|
Reservoir
|
|
Hyrel 3D's Coaxial Extrusion Head with Nozzle Heater
|
All
|
Reservoir
|
|
Configuring "Zebra" prints in Repetrel on Hyrel 3D Printers
|
All
|
Zebra Prints
|
|
Designing Scaffolds in Repetrel
|
All
|
Scaffolds
|
|
Resolving a stuck plunger in a Hyrel 3D reservoir head
|
All
|
Reservoir
|
|
Hyrel 3D Announces Polar Printing for Extreme Environments!
|
Polar
|
All
|
|
Eliminating air bubbles in a Hydrogel
|
All
|
Reservoir
|
|
Cleaning Hyrel 3D's DMH-2 Dynamic Mixing Head
|
All
|
DMH-2
|
|
How to echo gcode commands to the display
|
All
|
Usage
|
|
Removing PCL Prints Faster and Easier
|
All
|
PCL
|
|
Overview of the Hyrel 3D "Quiet Storm" Additional Cooling Fan
|
All
|
Quiet Storm
|
|
Preparation and Setup for Printing PCL (polycaprolactone)
|
All
|
PCL
|
|
Choosing and Specifying Parameters for Rectangular Infill Scaffolds
|
All
|
Scaffolds
|
|
Choosing and Specifying Parameters for Gyroid Infill PCL Scaffolds
|
All
|
Scaffolds
|
|
Showing the Effects of Cooling while Printing
|
All
|
Cooling
|
|
How to manage Accessory Manuals in Repetrel
|
All
|
Usage
|
|
Saving, Naming and Reusing Scaffolds
|
All
|
Scaffolds
|
|
How to work with our Heated Nozzle Accessory
|
All
|
Heated Nozzles
|
|
Using Filters to refine SurferBuddy search results
|
All
|
SurferBuddy
|
|
How to Export SurferBuddy Files to External Drive 1
|
All
|
SurferBuddy
|
|
Using Parameter Profiles in Repetrel
|
All
|
Parameter Profiles
|
|
How to Export GCODE from Repetrel
|
All
|
Usage
|
|
Using offsets to repeat a job in different locations
|
All
|
Offsets
|
|
Custom screeding attachment for the Hyrel Hydra
|
16A
|
Calibration
|
200px
|
Hyrel Nozzle Heater for Reservoir Heads
|
All
|
Reservoir
|
|
Unboxing the Hyrel EHR for electro-spinning or melt-electro-writing (MEW)
|
EHR
|
Setup
|
|
Calibrating Travel on the EHR
|
EHR
|
Calibration
|
|
Unpacking and Setting Up the EHR
|
EHR
|
Setup
|
|
How to check if your CO2 Laser is working
|
Hydra
|
Lasers
|
|
Etching Aluminum with 450 nm Diode Laser
|
any
|
Lasers
|
|
Heated and Chilled Vacuum Bed (HCVB)
|
EHR, 16A
|
Reservoir
|
2020 (30)
Table of Video Links, 2020
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
The Hyrel Hydra Electrical Panel, Explained
|
16A
|
Overview
|
|
Making DXFs from Camera Images
|
All
|
Lasers
|
|
Viscotec Vipro HEAD-3 on Hyrel
|
All
|
Viscotec
|
|
Explaining the NEW RSD-30
|
All
|
Reservoirs
|
|
Making DXFs from CAD Models
|
All
|
Lasers
|
|
4th/5th Axis Installation and Setup
|
16A
|
All
|
|
3-Phase Spindle Tool Installation and Setup
|
16A
|
Spindles
|
|
Clench/Pinch Valve Installation and Setup
|
All
|
Reservoirs
|
|
Dynamic Mixing Head (DMH) Installation and Setup
|
All
|
Reservoirs
|
|
EHR Electronics Access
|
EHR
|
Overview
|
|
ESR Unboxing and Setup
|
ESR
|
Setup
|
|
RSD-30 Refrigerated Syringe Dispenser
|
All
|
Reservoirs
|
|
Printing on PEI
|
All
|
Filaments
|
|
Printing Cememtitious Materials at TN Tech
|
All
|
Reservoirs
|
|
Tightening set screws for Hydra X-axis
|
16A
|
Maintenance
|
|
Interview on GA Mfg News
|
All
|
All
|
|
Hyrel V4 Install No. 9: Licensing
|
All
|
All
|
|
Hyrel V4 Install No. 8: Recipes
|
All
|
All
|
|
Hyrel V4 Install No. 7: Settings
|
All
|
All
|
|
Hyrel V4 Install No. 6`: Firmware
|
All
|
All
|
|
Hyrel V4 Install No. 5: Drivers
|
All
|
All
|
|
Hyrel V4 Install No. 4: Repetrel
|
All
|
All
|
|
Hyrel V4 Install No. 3: Adobe Reader
|
All
|
All
|
|
Hyrel V4 Install No. 2: Ecosystem Apps
|
All
|
All
|
|
Hyrel V4 Install No. 1: Winrar
|
All
|
All
|
|
Hydra 16AT - Tall
|
16A
|
All
|
|
Hyrel Bulk Feeder for Cementitious Materials
|
16A
|
Reservoirs
|
|
Using the new Precision Tool Setter on a Hyrel 3D Printer
|
16A
|
All
|
|
How to Dial In the Prime and Unprime Settings
|
All
|
All
|
|
Installing a Second Yoke on a Hyrel Hydra
|
16A
|
All
|
2019 (21)
Table of Video Links, 2019
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
RSD-30 - Refrigerated Syringe Dispenser
|
All
|
Reservoirs
|
|
Heated & Chilled Vacuum Bed
|
16A, EHR
|
Reservoirs
|
|
4th Axis Fun - Linear and Rotary Printing
|
16A
|
All
|
|
CO2 Laser - Installation Instructions
|
16A
|
Lasers
|
|
Dynamic Mixing Head DMH
|
All
|
Reservoirs
|
|
Configuring Prusa Slicer for Multi-Material Support
|
All
|
Filaments
|
|
Configuring the Prusa Slicer for Breakaway Support Material
|
All
|
Filaments
|
|
How to Load Filament into a Hyrel 3D Print Head
|
All
|
Filaments
|
|
Loading Print Heads into your Hyrel 3D Printer
|
All
|
All
|
|
How to Calibrate the Z-Zero Position
|
16A, 30M, ESR
|
All
|
|
Revised 2019: Hyrel 30M Initial Setup
|
30M
|
All
|
|
How to select a Build Surface
|
All
|
Filaments
|
|
How to Tram (level) the Hydra Bed
|
16A
|
All
|
|
Laser Marking on a Cylinder
|
All
|
Lasers
|
|
Five Axis Machining in Brass on a Hyrel Hydra
|
16A
|
Spindle
|
|
Configuring your Hydra for a 3-phase Spindle Tool
|
16A
|
Spindle
|
|
Five Axis Machining on a Hyrel Hydra (this gcode was used)
|
16A
|
Spindle
|
|
Dispensing RTV Silicone on a Hyrel Hydra
|
All
|
Reservoirs
|
|
Machining PTFE (Teflon) on a Hyrel Hydra
|
16A
|
Spindle
|
|
Rotating Head Prototype
|
16A
|
Filaments
|
|
Re-aligning the Gantry on the Hyrel Hydra 16A
|
16A
|
All
|
2018 (12)
Table of Video Links, 2018
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
Installing the new laser Power Supply in a Hyrel Hydra
|
16A
|
All
|
|
Hyrel Tapping Enabled
|
16A
|
Spindle
|
|
Light Duty Milling with 3-Phase Spindle on a Hyrel Hydra
|
16A
|
Spindle
|
|
Improved UV Light Source for more Powerful Crosslinking
|
All
|
Reservoirs
|
|
How to install 4th and 5th Axes on a Hyrel Hydra
|
16A
|
All
|
|
How to use an additional Yoke on a Hyrel Hydra
|
16A
|
All
|
|
How to install an additional Yoke on a Hyrel Hydra
|
16A
|
All
|
|
The Filament Dryer
|
All
|
Filaments
|
|
Fourth and Fifth Axes Demo on a Hyrel Hydra
|
16A
|
All
|
|
Installing a fourth axis on a Hyrel Hydra
|
16A
|
All
|
|
Machining hotbeds to under 0.001"
|
16A
|
All
|
|
Setting the Z-Offset on the EHR
|
EHR
|
All
|
2017 (45)
Table of Video Links, 2017
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
CO2 Laser Marking with the Hydra
|
16A
|
Lasers
|
|
Converting a Hydra from Printer to Laser
|
16A
|
Lasers
|
|
Cutting Nylon Mesh with CO2 Laser on a Hydra
|
16A
|
Lasers
|
|
Chamber Temperature in a Cold Room
|
16A
|
Filaments
|
|
Cutting acrylic with the CO2 Laser
|
16A
|
Lasers
|
|
Tiny Heated Chilled Bed Preview
|
EHR
|
Reservoirs
|
|
Fourth Axis Rotary Print
|
16A
|
Filaments
|
|
Additive Manufacturing of Toroid Inductor for Electronics Applications
|
30M, ESR
|
Reservoirs
|
|
Hyrel Hydra X and Y Belt Tension Adjustments
|
16A
|
Maintenance
|
|
Hyrel Hydra Linear Bearing Adjustments
|
16A
|
Maintenance
|
|
Hyrel Hydra Z Belt Tension Adjustments
|
16A
|
Maintenance
|
|
Changing the Address Resistor on the CO2 Laser
|
16A
|
Maintenance
|
|
CO2 Laser Alignment
|
16A
|
Calibration
|
|
Hydra Yoke Adjustment
|
16A
|
Maintenance
|
|
Hydra Yoke Angle Adjustment
|
16A
|
Maintenance
|
|
Engnie, High Resolution (EHR) Setup, Part 2
|
EHR
|
Setup
|
|
Engnie, High Resolution (EHR) Setup, Part 1
|
EHR
|
Setup
|
|
EHR Scaffold Instructions
|
EHR
|
Setup
|
|
EHR Scaffold Intro
|
EHR
|
Setup
|
|
Unclogging a rare clogged MK1-250
|
All
|
Filaments
|
|
Unclogging a rare clogged MK1-450
|
All
|
Filaments
|
|
Flashing Firmware on the Modified CO2 Laser Controller
|
16A
|
Maintenance
|
|
The Hyrel Hydra Family
|
16A
|
All
|
|
High Resolution Engine Vacuum Bed
|
EHR
|
Reservoirs
|
|
High Resolution Engine Setup
|
EHR
|
Setup
|
|
SDS Clench Valve Assembly Instructions
|
All
|
Reservoirs
|
|
How to Load the SDS Clench Valve
|
All
|
Reservoirs
|
|
EHR Accuracy Test
|
EHR
|
Calibration
|
|
Hydra 16A Controls Overview
|
16A
|
All
|
|
Using Low Temperature Solder Paste to connect a Flat Flex Cable
|
30M, ESR
|
Assembly
|
|
Draining Laser Coolant on the Hyrel Hydra
|
16A
|
Lasers
|
|
Hydra Home Calibration Details
|
16A
|
Calibration
|
|
Replacing the top component on an SDS Head Assembly
|
16A
|
Setup
|
|
HYDRA Hot Bed Installation
|
16A
|
Setup
|
|
Hydra Model Startup
|
All
|
Reservoirs
|
|
Unboxing the Hydra Floor Model Units
|
16A
|
Setup
|
|
Hydra Overview by CTO Karl Gifford
|
16A
|
All
|
|
How to Manage the Pick-and-Place with Repetrel Software
|
16A
|
Pick-and-Place
|
|
Hyrel Hydra Versitility
|
16A
|
All
|
|
Hydra Vinyl Cutter Overview
|
16A
|
Cutting
|
|
Hyrel 3D Hydra Pick-and-Place Introduction
|
16A
|
Pick-and-Place
|
|
The Hyrel3D Hydra Line
|
16A
|
All
|
|
Tramming the bed on the 16A
|
16A
|
Maintenance
|
|
The Benefits of Microscope Inspection During Printing
|
All
|
Microscopes
|
|
Printing PLGA for internal Biological Applications
|
All
|
Reservoirs
|
2016 (60)
Table of Video Links, 2016
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
Varialble Width Conductive Paste Extrusion
|
Any
|
Reservoirs
|
|
Microscope Print View Setup
|
Any
|
Microscope
|
|
Replacing the LED Strip
|
30M
|
Maintenance
|
|
Replacing the Front Switch Panel
|
30M
|
Maintenance
|
|
Static Mixing Head (SMH) Explained - v2 Including SDS Heads
|
Any
|
Reservoirs
|
|
Hot Bed Manufacturing
|
Hydra
|
Manufacturing
|
|
Static Mixing Head (SMH) Explained
|
Any
|
Reservoirs
|
|
Timelapse Recording
|
Any
|
Recording
|
|
HotHead LEDs Explained
|
Any
|
Any
|
|
LA6-450 and LA5-808 Laser Overview
|
Any
|
Lasers
|
|
SDS and CSD Overview
|
Any
|
Reservoirs
|
|
Quiet Storm Cooling Fan Overview
|
Any
|
Filaments
|
|
VOL-25 and VCD-25 Overview
|
Any
|
Reservoirs
|
|
KRA-15 and KCD-15 Overview
|
Any
|
Reservoirs
|
|
Hydra 640 (16A) Two Part Test Print
|
Hydra
|
Filaments
|
|
Extrusion Prototype Print
|
Any
|
Filaments
|
|
EMO-25 and COD-25 Overview
|
Any
|
Reservoirs
|
|
Session 3C Slicing for Multiple Head Support
|
Any
|
Slicing
|
|
Session 3A - Setting Two Heads to Z-Zero
|
Any
|
Setup
|
|
Session 3B - Calibrating the Offset Between Two Heads
|
Any
|
Setup
|
|
Session 2D - Editing Slic3r Recipes
|
Any
|
Slicing
|
|
Session 2E - Slicing your STL and Viewing your GCODE
|
Any
|
Slicing
|
|
Session 2C - Positioning, Scaling, and Rotating your STL
|
Any
|
Slicing
|
|
Session 1A - Hardware and Software Overview
|
Any
|
Overview
|
|
Session 1B - Communications and Bed Leveling
|
30M, ESR
|
Setup
|
|
Session 1C - Printing with Plasticine
|
Any
|
Reservoirs
|
|
Session 2A: Simple CAD Modeling in FreeCAD
|
Any
|
Software
|
|
PC to Printer Connectivity
|
Any
|
Setup
|
|
Using the Spindle Tool to rework Circuit Boards
|
Any
|
Spindle
|
|
Running a FADAL CNC on Hyrel3D Circuitry, Firmware and Software
|
n/a
|
Manufacturing
|
|
Table Arm (X-Arm) Block Adjustment
|
30M, ESR
|
Maintenance
|
|
MK1-250 Overview
|
Any
|
Filaments
|
|
MK1-450 Overview
|
Any
|
Filaments
|
|
MK2-250 Overview
|
Any
|
Filaments
|
|
Replacing the 30M/ESR Heated Build Platform
|
30M, ESR
|
Maintenance
|
|
Multi Head Printing - Nested STLs
|
Any
|
Software
|
|
X-Axis Belt Tightening
|
30M, ESR
|
Maintenance
|
|
Y-Axis Belt Tightening
|
30M, ESR
|
Maintenance
|
|
Plasma Magnetic Vortex Deposition (ElectroSpinning)
|
EHR
|
Electro (Melt) Spinning
|
|
3D Milling on the Hydra Series
|
Hydra
|
Spindle
|
|
Introducing the Hydra 640 (formerly Model 16A)
|
Hydra
|
Overview
|
|
USBB Jumper Instructions
|
Any
|
Setup
|
|
Size Does Matter
|
Hydra
|
Overview
|
|
Print Heads Overview
|
Any
|
All
|
|
Session 2F - Loading and Printing with Filaments, MK-Series Heads
|
Any
|
Filaments
|
|
MK1-250 PEEK Nozzle Assembly
|
Any
|
Filaments
|
|
New Hydra Printer Line Intro
|
Hydra
|
Overview
|
|
Bioplotting for under $10K
|
EHR
|
Introduction
|
|
Programming Head Offsets
|
Any
|
Setup
|
|
Slicing for a Two-Material Print
|
Any
|
Slicing
|
|
Loading Filament and Printing with the Hyrel3D MK2-250
|
Any
|
Filaments
|
|
Loading Filament and Printing with the Hyrel3D MK1-250
|
Any
|
Filaments
|
|
Loading and Printing with the EMO-25 Print Head
|
Any
|
Reservoirs
|
|
SDS RTV Instructions, v2
|
Any
|
Reservoirs
|
|
Intro to Hyrel Possibilities - Jan 2016
|
All
|
Overview
|
|
MK2-250 Dual Drive for Flexible Filaments
|
Any
|
Filaments
|
|
6w, 450nm Laser Test
|
Any
|
Lasers
|
|
SDS RTV Instructions, v1
|
Any
|
Reservoirs
|
|
Introducing the SDS Print Heads
|
Any
|
SDS
|
|
Sneak Peek: Pick and Place Prototype
|
Hydra
|
Pick-and-Place
|
2012-2015 (42)
Table of Video Links, 2012-2015
Video Link
|
Subject
|
Printer Model
|
Head / Activity
|
|
LA6-450: 6w, 450nm Diode Laser Head
|
Any
|
Lasers
|
|
3D Printing RTV Silicone
|
Any
|
Reservoirs
|
|
Loading the VCD-25
|
Any
|
Reservoirs
|
|
Short Porcelain Print Demo
|
Any
|
Reservoirs
|
|
Replacing the Tablet Interface Board
|
30M
|
Maintenance
|
|
2016 Design Contest Video
|
N/A
|
Contest
|
|
DXF to Laser Gcode Generation
|
Any
|
Setup
|
|
Printing PEEK (PolyEther Ether Ketone) and PC (PolyCarbonate)
|
Any
|
Filaments
|
|
Healing with MeshLab
|
Any
|
Setup
|
|
Postprocessing with a Heat Gun
|
Any
|
Postprocessing
|
|
Introduction to Hyrel 3D Possibilities, 2015
|
All
|
All
|
|
Updating to Repetrel 2 4xx
|
Any
|
Software
|
|
Updating your 407 Motion Controller
|
All
|
Software
|
|
Replacing the HOTHEAD controller
|
Any
|
Any
|
|
Programming the HOTBED controller on the System 30M and ESR
|
30M, ESR
|
Software
|
|
Printing with Cloning - three heads in Parallel
|
Any
|
Any
|
|
Older Instructions, Slicing for Multiple Head Support
|
printer
|
head
|
|
Leveling the X-Arm on System 30M, Engine SR
|
30M, ESR
|
Maintenance
|
|
Correcting Y-Arm Flexation Fix on the System 30M, Engine SR
|
30M, ESR
|
Maintenance
|
|
Manually Setting the Z-Zero Position
|
Any
|
Setup
|
|
Picking Right 3D Printer For You
|
All
|
All
|
|
Changing the Main I/O Board, System 30M, ESR
|
30M, ESR
|
Maintenance
|
|
Laser Test Print
|
Any
|
Lasers
|
|
EMO Series Printing Tips
|
Any
|
Reservoirs
|
|
Changing Power Supplies in the 30M and ESR
|
30M, ESR
|
Maintenance
|
|
Multi-Head Calibration Guide
|
Any
|
Setup
|
|
LA5-808 "Shark V" Diode Laser
|
Any
|
Lasers
|
|
Luer Tip Kit for EMO and SDS Series Print Heads
|
Any
|
Reservoirs
|
|
Print Head SDK
|
Any
|
New!
|
|
MK Series Printing Tips
|
Any
|
Filaments
|
|
Replacing fuses (old) on the Yoke
|
Any
|
Maintenance
|
|
Loading the EMO-type Reservoirs
|
Any
|
Reservoirs
|
|
Changing the Economics of 3D Printing
|
Any
|
Any
|
|
System 30M Product Release
|
30M
|
Introduction
|
|
Simultaneous 3D Printing of Multiple Parts
|
Any
|
Any
|
|
3D Printing with Sugru The Amazing Self-Setting Rubber
|
Any
|
Reservoirs
|
|
3D Printing with Play-Doh
|
Any
|
Reservoirs
|
|
3D Printing with Plasticine
|
Any
|
Reservoirs
|
|
3D Printing with Air-Dry Modeling Clay
|
Any
|
Reservoirs
|
|
Interchangeable Hot-Swappable Heads
|
Any
|
Any
|
|
Thank you, Kickstarters!
|
Any
|
Any
|
|
Quick Tour of our Main Shop!
|
Any
|
Any
|