Difference between revisions of "30M"

From Hyrel3D
Jump to navigation Jump to search
Line 18: Line 18:
Technical specifications for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
Technical specifications for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
   
   
=== Adjustments ===     
=== Adjustments ===     
* Speed of travel (at slicing or in g-code editor)
* Speed of travel (at slicing or in g-code editor)

Revision as of 17:04, 29 January 2021

History

This is our enclosed benchtop model.

  • The System was introduced during our KickStarter campaign, and came with a 23" tall enclosure.
  • The System 30 was an improvement made while fulfilling our KickStarter obligations, and came with a larger (30" tall) enclosure.
  • The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
  • The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation.

Technical Data

Technical specifications for printers currently shipping are detailed in the comparison chart on the Printer Overview page.

Adjustments

  • Speed of travel (at slicing or in g-code editor)
  • Layer thickness (at slicing)
  • Volume of flow per unit distance (at slicing or in g-code editor)
  • Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
  • Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
  • HotBed Temperature (at slicing, in g-code editor, or manually during build)

Or, is tabular better?

Adjustments
Metric Units During Slicing In G-Code Editor GUI During Build
Speed of Travel mm/min yes yes no
Layer Thickness mm yes no no
Flow Rate nL/sec yes yes yes
Extruder Temperature °C yes yes yes
Fan Speed % of max yes yes yes
HotBed °C yes yes yes