Difference between revisions of "30M"

From Hyrel3D
Jump to navigation Jump to search
Line 19: Line 19:


Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
== Adjustments ==   
{| border="1" class="wikitable"
|+ Adjustments
! Metric
! Units
! During Slicing
! In G-Code Editor
! GUI During Build
|-
! Speed of Travel
| mm/min || yes || yes || no
|-
! Layer Thickness
| mm || yes || no || no
|-
! Flow Rate
| nL/sec || yes || yes || yes
|-
! Extruder Temperature
| °C || yes || yes || yes
|-
! Fan Speed
| % of max || yes || yes || yes
|-
! HotBed
| °C || yes || yes || yes
|-
|}

Revision as of 17:37, 29 January 2021

The System 30M v2 is our leading enclosed, benchtop model.

S30M.jpg

History

  • The System was introduced during our 2012 Kickstarter campaign, and came with a 23" tall enclosure.
  • The System 30 was an improvement made while fulfilling our Kickstarter obligations, and came with a larger (30" tall) enclosure.
  • The System 30M was introduced in 2013, and came with a change to all metric fasteners and custom extrusions, and a single (vs double) front door.
  • The System 30M v2 was introduced in 2021, and comes with better motors with closed-loop feedback and quieter operation. CE marked units are available upon request.

Technical Data

Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the Printer Overview page.