Published Papers

Below is a list of published works citing Hyrel equipment.

Count

567 documents as of 25 September, 2024.

Non-Traditional Manufacturing (NTM)

Including:

Antennas
Sensors
Inductors
Circuits
Electro-Spinning
Electro-Melt-Spinning
Melt Electro-Writing (MEW)
4D Printing
Shape Memory Polymers
Nanostructures
Micro-Encapsulated Phase-Changing Materials (MEPCM)
Printing with Embedded Fibers
And combining two or more additive manufacturing methods in a single build.

NTM, 2024

Additively Manufactured Flexible Piezoelectric Wave-Based Multifunctional SensorMultifunctional Sensor, a Master's Thesis submitted to Embry-Riddle Aeronautical University
Inkjet Printing of a Gate Insulator: Towards Fully Printable Organic Field Effect Transistor by a team from the School of Engineering Technology, Purdue University
Extremely Stable, Multidirectional, All-in-One Piezoelectric Bending Sensor with Cycle up to Million Level by a team from several departments of Xi'an Jiaotong University, China
Hybrid 3D Printing of a Nature-Inspired Flexible Self-Adhesive Biopatch for Multi-Biosignal Sensing by a team from King Abdullah University of Science and Technology (KAUST)'s Smart Advanced Memory devices and Applications (SAMA) Lab, Mechanics of Composites for Energy and Mobility Lab, and Biological and Environmental Science and Engineering Division
Engineering of Functional Hybrid Nanocomposites for Renewable Energy Applications via Laser Ablation, a doctoral dissertation submitted to The University of Tennessee, Knoxville's Department of Chemical and Biomolecular Engineering
Multiscale 3d Printing via Active Nozzle Size and Shape Control by a team from the Department of civil and Systems engineering, Johns hopkins University
Versatile Patterning of Liquid Metal via Multiphase 3D Printing by a team from the School of Manufacturing Systems and Networks (MSN), Ira Fulton Schools of Engineering, Arizona State University
Advancing Interactive Systems With Liquid Crystal Network-based Adaptive Electronics by a team from Eindhoven University of Technology, The Netherlands
All-printed Multifunctional Sensors for Structural Health Monitoring of Inflatable Habitats by a team from Boise State University
In-space Manufacturing of Morphing Electronics by a team from Boise State University
ARJUNA: An Electrochemical Interface Mapping Probe for Solid-State Batteries by a team from Electrification & Energy Infrastructure Division, Oak Ridge National Laboratory
Recent Advances in Implantable Sensors and Electronics Using Printable Materials for Advanced Healthcare by a team from Georgia Tech, Chungnam National University, University of Washington Tacoma, and Emory University School of Medicine
Pediatric Formulations Developed by Extrusion-Based 3D Printing: From Past Discoveries to Future Prospects, results compiled by a team from Centre National de la Recherche Scientifique et Technologique (CRNF) and Delpharm, France
3D Printing Carbon-Carbon Composites With Multilayered Architecture for Enhanced Multifunctional Properties by a team from Arizona State University, Centre National de la Recherche Scientifique et Technologique (CRNF), Texas A&M University, and University of Georgia
Direct Ink Writing of Strained Carbon Nanotube-Based Sensors: Toward 4D Printable Soft Robotics by a team from SAMA Laboratories, Electrical and Computer Engineering, Computer Electrical Mathematical Science and Engineering Division, King Abdullah University of Science and Technology (KAUST) and Electrical Engineering, King Fahd University of Petroleum and Minerals (KFUPM)
Liquid Crystal Elastomer Soft Robotic Arm for Pick-and-place Operation Controlled by Light by a team from Technische Universiteit Eindhoven
Development of Multimaterial Additive Manufacturing Systems for Embedded Electronics by a team from the Department of Mechanical Engineering, Pennsylvania State University and the Department of Mechanical Engineering, University of Houston
Direct Ink Writing of 4D Structural Colors by a team from Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry and Institute for Complex Molecular Systems (ICMS) of the Eindhoven University of Technology (TU/e)
A Flexible and Electrically Conductive Liquid Metal Adhesive for Hybrid Electronic Integration by a team from Virginia Tech
Low-Roughness 3D Printed Surfaces by Ironing for the Integration with Printed Electronics by a team from the Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto

NTM, 2023

Surface Oxide Removal in Preparation for Controlled Liquid Metal Embrittlement by a team from the US Army Engineer Research and Development Center (EDRC)'s Construction Engineering Research Laboratory and Geotechnical & Structures Laboratory
Vitrimer Chemistry for 4D Printing Formulation by a team from Sahand University of Technology, Iran, Nottingham Trent University, UK, and Deakin University, Geelong, Australia
Laser-Induced Graphene Electrodes for OrganicElectrochemical Transistors (OECTs) by a team from Department of Electrical Engineering and Computer Science, Lassonde School of Engineering, York University, Toronto
3D Printing-Enabled Design and Manufacturing Strategies for Batteries: A Review by a team partially from Arizona State University
Permeable Skin Patch with Miniaturized Octopus-Like Suckers for Biosignal Monitoring by a team from King Abdullah University of Science and Technology (KAUST)
Evaluation of Low-Loss Polymer Switches for Multinuclear MRI/S*by a team primarily from Texas A&M University (TAMU)
Energy Harvesting Using High-Strength and Flexible 3D-Printed Cellulose/Hexagonal Boron Nitride Nanosheet Composites by a team from several departments of the Institute of Technology, Kharagpur
Competing Effects of Radio Frequency Fields on CarbonNanotube/Resin Systems: Alignment versus Heating by a team from several departments of Texas A&M University and from Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR)
Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts by a team from Duy Tan University, Vietman, Nanyang Technological University, Singapore, The Hebrew University of Jerusalem, Jerusalem , Israel, and City University of Hong Kong, China
Sustainable Piezoelectric Energy Harvesting Using 3D Printing with Chicken Bone Extract by a team from several departments of the Indian Institute of Technology, Kharagpur and the Defence Materials and Stores Research and Development Establishment (DMSRDE), Kanpur
Phase Change Materials Incorporation Into 3d Printed Geopolymer Cement: a Sustainable Approach to Enhance the Comfort and Energy Efficiency of Buildings by a team from the Department of Civil and Mechanical Engineering and Department of Chemistry of the Technical University of Denmark and the Faculty of Engineering Technology, Department of Thermal and Fluid Engineering (TFE), University of Twente, the Netherlands
Navigating Soft Robots through Wireless Heating by a team from Carnegie Mellon University
Electrical Properties of Pvdf Films Fabricated by Direct Ink Writing by a team from Central South University, China
Characteristic Analysis of Heterochiral TCP Muscle as a Extensile Actuator for Soft Robotics Applications by a team from the Department of Manufacturing Engineering, Georgia Southern University
3D-Printed Elastomer Ternary Composites for Piezoelectric Energy Generation by a team from several departments of Tuskegee University
Biomimetic Flexible Electronic Materials from Silk Fibroin-MXene Composites Developed via Mussel-Inspired Chemistry as Wearable Pressure Sensors by a team from the Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Department of Health Technology, Technical University of Denmark, and Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne
Self-Assembly-Driven Bi2S3 Nanobelts Integrated a Silk-Fibroin-Based 3D-Printed Aerogel-Based Scaffold with a Dual-Network Structure for Photothermal Bone Cancer Therapy by a team from the Institute of Inorganic Chemistry, University of Cologne, the Department of Chemistry, Materials and Chemical Engineering, Politecnico di Milano, and the Center for Molecular Medicine Cologne (CMMC)
3D Printing of Responsive Chiral Photonic Nanostructures by a team from Cornell University's Department of Food Science and University of South Carolina's Departments of Biomedical and Chemical Engineering
3D Printed Dry Electrodes for Electrophysiological Signal Monitoring: A Review by a team from King Abdullah University of Science and Technology (KAUST)
3D Printing-Assisted Self-Assembly to Bio-Inspired Bouligand Nanostructures by a team from the Department of Chemical Engineering, University of South Carolina
Conductive and Elastic Bottlebrush Elastomers for Ultrasoft Electronics by a team from a team from a variety of departments of the University of Toronto
Processes & Toolchain For Automation Of Hybrid Direct-Write 3D Printing, a PhD thesis submitted to the Department of Electrical and Computer Engineering, University of Texas at El Paso

NTM, 2022

Direct Ink Writing of 4D Structural Colors by a team from Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry and Institute for Complex Molecular Systems (ICMS) of the Eindhoven University of Technology (TU/e)
4D Printing of Extrudable and Degradable Poly(Ethylene Glycol) Microgel Scaffolds for Multidimensional Cell Culture by a team from the Department of Chemical and Biological Engineering and the BioFrontiers Institute of the University of Colorado - Boulder and the Medical Scientist Training Program, School of Medicine, University of Colorado - Anschutz Medical Campus
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament by a team from King Abdullah University of Science and Technology, Yachay Tech Universiy, and King Abdulaziz University
Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups by a team from the Laboratoire de Génie Electrique et Ferroélectricité, Institut National des Sciences Appliquées, Université de Lyon and the Hybria Institute of Business and Technologies
Enhancing Stability of High-Nickel Cathodes for Lithium-Ion Batteries through Additive Manufacturing of Cathode StructureBatteries through Additive Manufacturing an Honors Thesis submitted to the Mechanical Engineering Department of the University of Arkansas
Additively Manufactured Unimorph Dielectric Elastomer Actuators with Ferroelectric Particles for Enhanced Low-Voltage Actuation by a team from the Aerospace Engineering Department of Embry-Riddle Aeronautical Univeristy
Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments, a review of "the most recent advances from technological and physico-chemical perspectives to improve several remaining issues in polymeric materials’ additive manufacturing", by a team from Universidad San Sebastián, Universidad Tecnológica Metropolitana, Santiago, and Instituto de Ciencia y Tecnología de Polímeros-Consejo Superior de Investigaciones Científicas, Chile

NTM, 2021

4D-Actuators by 3D-Printing Combined with Water-based Curing by a team from Institute of Active Polymers, Helmholtz-Zentrum Hereon
4D Printing of Engineered Living Materials by a team from several departments at [https://www.tamu.edu/ Texas A&M University
Design and Development of Soft Earthworm Robot Driven by Fibrous Artificial Muscles a thesis presented to Georgia Southern University
Comprehensive Review on Design and Manufacturing of Bio-scaffolds for Bone Reconstruction by a team from School of Mechanical Engineering Vellore Institute of Technology, India
Printed Electronic Devices with Inks of TiS3 Quasi-One-Dimensional van der Waals Material by a team from University of California, Riverside and University of Nebraska, Lincoln
3D Printing of Thermo-Sensitive Drugs by a team from the University of South Australia and Addis Ababa University
Printable Elastomeric Electrodes with Sweat-Enhanced Conductivity for Wearables by a team from the School of Materials Science and Engineering, Nanyang Technological University and the School of Electrical Engineering and Automation, Wuhan University
Optimal Soft Composites for Under-Actuated Soft Robots by a team from The Singapore University of Technology and Design
Review of Low-Cost 3D Bioprinters: State of the Market and Observed Future Trends
3D Printing of Electrically Responsive PVC Gel Actuatorsby a team from the Mechanical and Aerospace Engineering and Materials Science and Engineering departments of The University of California, San Diego
4D Printing with Bio-based Polymers for Adaptive Wearable Devices, submitted in fulfillment of the requirements for the degree of Master of Design Innovation
Automated Fiber Embedding for Soft Mechatronic Components by a team from the Manufacturing and Design Centre of the Singapore University of Technology and Design
Silicone/Epoxy Hybrid Resins with Tunable Mechanical and Interfacial Properties for Additive Manufacture of Soft Robots by a team from the Manufacturing and Design Centre and the Engineering Product Development Pillar of the Singapore University of Technology and Design
3D-Printed Triboelectric Nanogenerators: State of the Art,Applications, and Challenges by a team from the engineering schools of Deakin University, The University of Melbourne, UCLA, and Georgia Tech
Enhanced Wettability in Ultrasonic-Assisted Soldering to Glass Substrates, by a team from the Department of Mechanical Engineering, Clemson University

NTM, 2020

4D Printing of Shape-memory Polymeric Scaffolds for Adaptive Biomedical Implantation by a team from the Department of Mechanical and Aerospace Engineering, the Department of Surgery, the Food Science Program, Division of Food Systems & Bioengineering, and the Department of Biomedical, Biological & Chemical Engineering of the University of Missouri
Morphing Circuit: An Integrated Design, Simulation, and Fabrication Workflow for Self-morphing Electronics by a team from Carnegie Mellon University and Zhejiang University, China
An Integrated Manifold Learning Approach for High Dimensional Data Feature Extractions and its Applications to Online Process Monitoring of Additive Manufacturing by a team from Oak Ridge National Laboratory, Virginia Tech, and Oklahoma Stata University, funded by the National Science Foundation and the Office of Naval Research
Additive Manufacturing Techniques for Smart Prosthetic Liners by a team from several departments of the University College London in cooperation with the Royal National Orthopaedic Hospital, Stanmore, UK
Guideline for Paste Extrusion 3D Printing of Slump-Free Ferrite Inductor Cores by a team from Virginia Tech's Materials Science and Engineering Department, Center for Power Electronics Systems, and Bradley Department of Electrical and Computer Engineering
Reliability Assessment of Magnetic Cores and 3D-printed Constant-flux Inductors by a team from Virginia Tech and Texas Instruments
Z-Meandering Miniaturized Patch Antenna Using Additive Manufacturing by a team from Aerospace Engineering at Embry-Riddle Aeronautical University
Wetting Analysis of the Ultrasonic-Assisted Soldering Process, a thesis submitted to The Mechanical Engineering Department of Clemson University
Solid Dosage Form Production, a patent application by a team from the School of Pharmacy and Biomedical Sciences of the University of Central Lancashire
Flexible Fiber Interconnects For Soft Mechatronics by a team from the Singapore University of Technology and Design (SUTD)

NTM, 2019

NTM, 2018

NTM, 2017

Additive Manufacturing of Toroid Inductor for Electronics Applications by Chao Ding, Virginia Tech
Self-Actuating 3D Printed Packaging for Deployable Antennas, by a team from Georgia Tech
A Preliminary Study of Conductive Filaments Printed Via Fused Filament Fabrication by Smruti Ranjan Sahoo at Rochester Institute of Technology
Review of Batteryless Wireless Sensors Using Additively Manufactured Microwave Resonators in Sensors, a Journal of the Multidisciplinary Digital Publishing Institute
4D Printing of Liquid Crystal Elastomers by a team from the Bioengineering Department of the University of Texas, Dallas

NTM, 2016

NTM, 2015

Unheated or Chilled Reservoir Printing (DIW, SEP, SSE, 3DCP, DCC)

Also known as Robocasting or DIW (Direct Ink Writing), SEP (Semisolid Extrusion Printing), SSE (Semisolid Extrusion). 3DCP' (3D Concrete Printing), or DCC (Digital Concrete Construction).

DIW/SEP/SSE, 2024

DIW/SEP/SSE, 2023

Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing by a team from Brown University, Virginia Tech, and University of Nebraska–Lincoln
Engineering Nano/Microscale Chiral Self-Assembly in 3D Printed Constructs by a team from the University of South Carolina's Department of Chemical Engineering and Biomedical Engineering Program and from TA Instruments
Design and Fabrication of Flexible Woodpile Structured Nanocomposite for Microwave Absorption Using Material Extrusion Additive Technique by a team from the Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad
Towards a Predictive Understanding of Direct Ink Writing of Graphene-based Inks by a team from several departments of Eindhoven University of Technology
Direct Ink Writing of Polyimide Aerogels for Battery Thermal Mitigation by a team from Texas A&M University and the NASA Glenn Research Center
Designing Liquid Metal Microstructures Through Directed Material Extrusion Additive Manufacturing by a team from several departments of Virginia Tech, Brown University, and University of Nebraska–Lincoln
Development of 3d Printing Techniques for Solid-state Lithium Batteries by a team from Lawrence Livermore National Laboratory
Processing of Bioceramics by Additive Manufacturing, affiliation unknown
Semisolid Extrusion Printing and 3D Bioprinting by a team from College of Pharmacy, The University of Texas at Austin and School of Pharmacy, University of Mississippi
Size-dependent Viscoelasticity in Hybrid Colloidal Gels Based on Spherical Soft Nanoparticles and Two-dimensional Nanosilicates of Varying Size by a team from the University of South Carolina
DC Resistance Measurements in Multi-Layer Additively Manufactured Yttrium Barium Copper Oxide Components by a team from Loughborough University, UK
Morphology Map-guided Identification of Bijel Ink for Producing Conductive Porous Structures by a team from Texas A&M University
Peritoneal Implants and Drug Delivery by a team from several departments of Government College University, Faisalabad, Pakistan, Government College University, Lahore, Pakistan, and University of Lahore, Lahore, Pakistan
A Bioinspired and Sustainable Route for the Preparation of Ag-crosslinked Alginate Fibers Decorated With Silver Nanoparticles by a team from the University of Florence and the Université de Strasbourg, France
Radio Frequency-assisted Curing of on-chip Printed Cnt/silicone Heatsinks Produced by Material Extrusion 3d Printing by a team from Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A⁎STAR) and from Texas A&M University's departments of Chemical Engineering and Materials Science & Engineering
Multimaterial Hydrogel 3D Printing by a team from School of Chemical Sciences The University of Auckland
Fabrication of Gentamicin Sulfate-Loaded 3D-PrintedPolyvinyl Alcohol/Sodium Alginate/Gelatin-MethacryloylHybrid Scaffolds for Skin Tissue Replacement by a team from several departments of Marmara University, Istanbul
Sintering Energy Conservation in Extrusion-based 3d Printing of Porcelain Ceramics Blended With Copper and Allied Alloys: a Sustainable Approach by a team from the Department of Mechanical Engineering, Indian Institute of Technology Tirupati
Ultrasensitive and Robust Mechanoluminescent Living Composites by a team from multiple departments of the University of California, San Diego and from the Van der Waals-Zeeman Institute, Institute of Physics, University of Amsterdam
Applicability of UV-Curable Binders in High Solid Suspensions for Direct-Ink-Write 3D Printing in Extremely Cold Temperatures by a team from the NASA Marshall Space Flight Center and Georgia Tech's School of Chemical and Biomolecular Engineering and School of Mechanical Engineering
3d Printing to Enable Photocatalytic Process Engineering: a Critical Assessment and Perspective by a team from Materials Research and Technology (MRT) Department, Luxembourg Institute of Science and Technology (LIST) and several departments at King Abdullah University of Science and Technology
Recent Progress on the 3D Printing of Dynamically Cross-Linked Polymers by a team from the School of Materials Science and Engineering, Henan University of Technology
3d Printing of Tough Nature Inspired Hierarchical Architecture Using Chicken Bone and Eggshell Biowaste for Biomedical Applications by a team from several locations of the Indian Institutes of Technology and from Morgan Advanced Materials, State College, PA
3d-printing Formulated Polyelectrolyte Complexes (Pecs) in Air: Silica Compositions in Rheological Optimization for Layering by a team from The University of Tennessee, Knoxville, TN and North Dakota State University, Fargo, ND
Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, Estonia, National University of Pharmacy, Kharkiv, Ukraine, Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine, and CurifyLabs, Helsinki, Finland
Fabrication and Characterization of Advanced Epoxy-based Composites and Nanocomposites, a PhD thesis submitted to Rice University
Future Directions in Ceramic Additive Manufacturing: Fiber Reinforcements and Artificial Intelligence by a team from the US Air Force Research Laboratory
Polymer/Coal Composites from Ink-based Additive Manufacturing, a Masters thesis submitted to Arizona State University
A Conformal Heat-drying Direct Ink Writing 3d Printing for High-performance Lithium-ion Batteries by a team from Electrification and Energy Infrastructures Division, Oak Ridge National Laboratory, Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, and Department of Mechanical and Aerospace Engineering, Case Western Reserve University
Semi-solid Extrusion 3d-printing of Eucalypt Extract-loaded Polyethylene Oxide Gels Intended for Pharmaceutical Applications by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, The National University of Pharmacy, Kharkiv, Ukraine, CurifyLabs, and Ivano-Frankivsk National Medical University, Ivano-Frankivsk, Ukraine
Deep-learning-assisted Printed Liquid Metal Sensory System for Wearable Applications and Boxing Training by a team from College of Mechanical Engineering, Zhejiang University of Technology, Department of Mechanical Engineering, University of Colorado Boulder, and College of Information Engineering, Zhejiang University of Technology
Development of Bean-based Emulgels for 3d Printing Applications: Feasibility for Dysphagia Diets by a team from the Universidad del Bío-Bío, Chile and Universidad de Santiago de Chile
On the 3d Printing of Polyelectrolyte Complexes: a Novel Approach to Overcome Rheology Constraints by a team from Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, Department of Macromolecular Sciences and Engineering, Case Western Reserve University, Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory, and multiple departments of University of Tennessee, Knoxville
Carbon Scaffold Architectures for Stable Lithium Metal Anodes, a paper from Lawrence Livermore National Laboratory
Printing Composites with Salt Hydrate Phase Change Materials for Thermal Energy Storage by a team from the Chemistry, Mechanical Engineering, and Materials Science & Engineering departments of Texas A&M University
Drug Delivery and Testing via 3D Printing by a team from the College of Pharmacy, Pandit Bhagwat Dayal Sharma University of Health Sciences, Rohtak and Department of Pharmaceutical Sciences, Maharshi Dayanand University, Rohtak
On the 3d Printability of One-part Moisture-curable Polyurethanes via Direct Ink Writing (DIW) by a team from the University of Tennessee, Knoxville, Case Western Reserve University, Novagard Solutions, and the Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory
Enhancing Photoelectrochemical Performance of the Printed Nanoporous FeVO4 Photoanode by Dual-Layer CoOx–CoPi Catalysts by a team from Duy Tan University, Vietman, Nanyang Technological University, Singapore, The Hebrew University of Jerusalem, Jerusalem , Israel, and City University of Hong Kong, China
D Printed Styrax Liquidus (Liquidambar Orientalis Miller)-loaded Poly (L-lactic Acid)/chitosan Based Wound Dressing Material: Fabrication, Characterization, and Biocompatibility Results by a team from Kartal Prof. Dr. Saban Teoman Durali Science and Art Center, Istanbul, Marmara University, Istanbul University-Cerrahpasa, Halic University, Koç University, Goztepe Prof. Dr. Suleyman Yalcin City Hospital, and Istanbul Arel University, all in Turkey
3D Printing, Histological, and Radiological Analysis of Nanosilicate-Polysaccharide Composite Hydrogel as a Tissue-Equivalent Material for Complex Biological Bone Phantom by a team from multiple departments of the Medical University of Varna, Bulgaria
PDMS-silica Composite Gas Separation Membranes by Direct Ink Writing by a team from University of the Philippines Diliman, University of Tennessee, Knoxville, Case Western Reserve University, North Dakota State University, and Oak Ridge National Laboratory
Ceramic Materials for 3d Printing of Biomimetic Bone Scaffolds – Current State-of-the-art & Future Perspectives by a team from TCentre for Nanotechnology & Advanced Biomaterials, School of Chemical & Biotechnology, SASTRA Deemed University, India and Orthopaedics and Musculoskeletal Sciences, Univeristy College, London
Pharmaceutical 3D-Printing of Nanoemulsified Eucalypt Extracts and Their Antimicrobial Activity by a team from Institute of Pharmacy, Faculty of Medicine, University of Tartu, The National University of Pharmacy, Ukraine, and Curify Labs, Finland
Texture in Silicon Carbide via Aqueous Suspension Material Extrusion and Seeded Grain Growth by a team from Purdue University
Shape Memory Soft Robotics with Yield Stress Fluids by a team from the University of Amsterdam and the Eindhoven University of Technology (TU Eindhoven)
Multimaterial Printing of Liquid Crystal Elastomers with Integrated Stretchable Electronics by a team from the Department of Mechanical Engineering and the Human Computer Interaction Institute of Carnegie Mellon University, and from the Institute of Systems and Robotics, Department of Electrical Engineering, University of Coimbra
Robocasting of Ceramic Fischer–Koch S Scaffolds for Bone Tissue Engineering by a team from the Department of Mechanical Engineering, the Department of Computer Science, the School of Biomedical Engineering and the Department of Mathematics of Colorado State University
In Vitro Electrically Controlled Amoxicillin Release from 3D-Printed Chitosan/Bismuth Ferrite Scaffolds by a team from the Department of Bioengineering, Faculty of Chemistry and Metallurgy, Yildiz Technical University, the BioMatter unit - École polytechnique de Bruxelles, Université Libre de Bruxelles, the College of Life Sciences, Xinyang Normal University (XYNU), and the Center for Nanotechnology and Biomaterials Application & Research (NBUAM), Department of Metallurgical and Materials Engineering, and Faculty of Pharmacy of Marmara University
Evaluation of Physicochemical Properties of Starch-Protein Gels: Printability and Ppostprocessing by a team from Universidad del Bío-Bío and Universidad de Chile
EpoMemory: Multi-state Shape Memory for Programmable Morphing Interfaces by a team from different departments of Carnegie Mellon University
Additive Manufacturing of Highly Flexible Impact Wave Propagation Sensor by a team from Los Alamos National Laboratory and The University of Texas at El Paso
3D Bioprintable Hypoxia-Mimicking PEG-Based Nano Bioink for Cartilage Tissue Engineering by a team from the Indian Institute of Technology (IIT) Hyderabad,'s Regenerative Medicine and Stem cell (RMS) Lab, Department of Biomedical Engineering and Department of Materials Science and Metallurgical Engineering, as well as the Sri Manjeera Super Specialty Hospital, Department of Obstetrics and Gynecology, Sangareddy
Electrically Controlled Liquid Crystal Elastomer Surfaces forDynamic Wrinkling by a team from Carnegie Mellon University's Department of Mechanical Engineering and Human-Computer Interaction Institute and the Mechanical and Industrial Engineering Department, University of Massachusetts
A Literature Review of Additive Manufacturing in the Fabrication of Soft Robots: Main Techniques, Applications, and Related Industrial-Sized Machines by a team from SENAI CIMATEC University Center, Brazil
Development and Optimization of 3D-Printed Flexible Electronic Coatings: A New Generation of Smart Heating Fabrics for Automobile Applications by a team from the Electrical Department, Ladoua Campus, University Lyon, INSA-Lyon and TESCA-Group
2D Stationary Computational Printing of Cement-based Pastes with Time-Dependent Rheology by a team from the Department of Chemical Engineering, Tennessee Technical University
3D Printing of a Biocompatible Nanoink Derived from Waste Animal Bones by a team from various departments of the Kharagpur, Gandhinagar, and Varanasi (BHU) campuses of the Indian Institutes of Technology
Assessing the Robustness of Cement-Hydrogel-Based Binders as 3D Printing Materials by a team from Department of Chemical Engineering, Tennessee Tech University
3D Printable Hydrogel with Tunable Degradability and Mechanical Properties as a Tissue Scaffold for Pelvic Organ Prolapse Treatment by a team from Arizona State University's The Polytechnic School (TPS), Ira A. Fulton Schools of Engineering, Department of Biomedical Engineering, School of Biological and Health Systems Engineering (SBHSE), andThe School of Manufacturing Systems and Networks (MSN), Ira A. Fulton Schools of Engineering; from The Mayo Clinic's Arizona departments of Department of Immunology, Head and Neck Regenerative Medicine Laboratory, Department of Medical and Surgical Gynecology, and Division of Laryngology, Department of Otolaryngology; and the Faculty of Engineering, Institute of Nanotechnology, Gonda Brain Research Center, Bar-Ilan University
Acrylic Sealants as Practicable Direct Ink Writing (DIW) 3D-Printable Materials by a team from the following organizations: Department of Macromolecular Sciences and Engineering, Case Western Reserve University, Novagard Solutions, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materials Avanzados S. C. (CIMAV-Unidad Monterrey), Department of Chemical and Biomolecular Engineering, Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville, Department of Materials Science and Engineering and Institute for Advanced Materials and Manufacturing, University of Tennessee, Knoxville, Department of Coatings and Polymeric Materials, North Dakota State University, and Center for Nanophase Materials and Sciences, Oak Ridge National Laboratory
Influence of Binder Concentration in Zeolitic ZSM-5/bentonite 3D-printed Monoliths Manufactured through Robocasting for Catalytic Applications by a team from the International Hellenic University and the Centre for Research and Technology Hellas (CERTH)
A Novel Approach for the Fabrication of 3D-Printed Dental Membrane Scaffolds including Antimicrobial Pomegranate Extract by a team primarily from Marmara University
3D Printing of Doped Barium-titanate Using Robocasting - Toward New Generation Lead-free Piezoceramic Transducers by a team from the INSA-Lyon and Thales Research & Technology
Comparison of Machine Learning Algorithms for Natural Gas Identification with Mixed Potential Electrochemical Sensor Arrays by a team from the Department of Physics, Yale University and the Center for MicroEngineered Materials, University of New Mexico
Effect of Particle Size on Additive Manufacturing of Complex Architecture of Silicon Carbide by a team from the Indian Institute of Technology's Kharagpur, (BHU) Varanasi, and Gandhinagar campuses, and well as the Vikram Sarabhai Space Centre
Direct Ink Write And Thermomechanical Characterization Of Thermoset Composites, a Master's thesis submitted to the Department of Mechanical Engineering, University of Texas at El Paso
Material Extrusion of Highly-Loaded Silicon Nitride Aqueous Inks for Solid Infilled Structures by a team from Materials and Manufacturing Directorate, Air Force Research Laboratory, National Research Council Research Associate Program, UES, Inc., Strategic Ohio Council for Higher Education, and General Electric Research
Printed Carbon Nanotube-Based Humidity Sensors Deployable on Surfaces of Widely Varying Curvatures by a team from the Department of Mechanical Engineering of the University of Maryland
Nanomechanical Characterization of 3D Printed Cement Pastes by a team from Vanderbilt University's [https://engineering.vanderbilt.edu/chbe/ Department of Chemical and Biomolecular Engineering and Department of Civil and Environment Engineering
Triplet Fusion Upconversion for Photocuring 3D Printed Particle-Reinforced Composite Networks by a team from the Department of Chemistry, University of Washington and the Department of Chemistry, Columbia University

DIW/SEP/SSE, 2022

Halloysite Reinforced 3D-printable Geopolymers by a team from The Technical University of Denmark's Departments of Civil & Mechanical Engineering, Physics, Heath Technology, and Nanolab, as well as the Department of Civil and Environmental Engineering, Imperial College London
Direct Ink Write 3D printing of Wave Propagation Sensor by a team from Los Alamos National Laboratory and from [http://utep.edu The University of Texas at El Paso
3D-printable Cyclic Peptide Loaded Microporous Polymers for Antimicrobial Wound Dressing Materials by a team from the Chemistry Division, U.S. Naval Research Laboratory
MultimodalIimaging Compatible Micro-Physiological System by a team from Department of Radiology, Texas Children's Hospital and Baylor College of Medicine's Departments of Radiology and Pediatrics-Oncology
Electric poling-assisted additive manufacturing technique for piezoelectric active poly(vinylidene fluoride) films: Towards fully three-dimensional printed functional materials by a team from Purdue University's School of Engineering Technology, School of Materials Engineering, and School of Industrial Engineering,
Extrusion-Based 3D Printing of Stretchable Electronic Coating for Condition Monitoring of Suction Cups by a team from Laboratoire de Génie Electrique, INSA Lyon and Hybria Institute of Business and Technologies, Écully Campus
Fabrication of 3D Printed Complex cConcentrated Alloys using Oxide Precursors by a team from Georgia Tech's School of Materials Science and Engineering and Department of Biomedical Engineering
3D-Printed PDMS-based Membranes for CO₂ Separation Applications by a team from Oak Ridge National Labratory's Center for Nanophase Materials and Sciences and Chemical Sciences Division, the Department of Macromolecular Sciences and Engineering, Case Western Reserve University, the Institute for Advanced Materials and Manufacturing, University of Tennessee Research Park, the Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines, the Department of Coatings and Polymeric Materials, North Dakota State University, and University of Tennessee, Knoxville's Department of Chemical and Biomolecular Engineering and Department of Chemistry
Performance of Lithium-Ion Batteries with 3D Printed Anodes and Compressible Carbon Structures, by Lawrence Livermore National Laboratory
Controlled Release of Metformin-Loaded SA/PEG Scaffolds produced by 3D-Printing Technology], published by Yildiz Technical University Press
Thermal and UV Curable Formulations of Poly(propylene glycol)–Poly(hydroxyurethane) Elastomers toward Nozzle-Based 3D Photoprinting by a team from the University of Liège
Mechanical Characterization of 3D-Printed Silicone/Epoxy Hybrids by a team from the Digital Manufacturing and Design Centre and the Engineering and Product Development Pillar of the Singapore University of Technology and Design
Freeform Liquid 3D Printing of Hydraulically Enhanced Dielectric Actuators by a team from Singapore University of Technology and Design
Viscoelastic and Thixotropic Characterization of Paraffin/Photopolymer Composites for Extrusion-Based Printing by a team from the departments of Chemestry, Mechanical Engineering, and Materials Science and Engineering, Texas A&M University
Additive Manufacturing of Nanotube-loaded Thermosets via Direct Ink Writing and Radio-Frequency heating and Curing by a team from The Artie McFerrin Department of Chemical Engineering, Texas A&M University, the Department of Materials Science and Engineering, Texas A&M University, the Chemical Engineering Department, Bolu Abant Izzet Baysal University, and the Singapore Institute of Manufacturing Technology (SIMTech)
3D-Printed PCL Scaffolds Combined with Juglone for Skin Tissue Engineering by a team from Marama University's Center for Nanotechnology & Biomaterials Application and Research (NBUAM), Department of Metallurgical and Materials Engineering, Institute of Pure and Applied Sciences, Department of Biochemistry, Faculty of Medicine, Department of Medical Microbiology, Faculty of Medicine, and from University Politehnica of Bucharest's Department of Science and Engineering of Oxide Materials and Nanomaterials, Faculty of Applied Chemistry and Materials Science, National Centre for Micro- and Nanomaterials, National Centre for Food Safety, and Department of Inorganic Chemistry, Physical Chemistry and Electrochemistry, Faculty of Applied Chemistry and Materials Science
Direct-Write Additively Printed Electronics for 3-Dimensional Electromagnetic Structures and Radio-Frequency Circuit Elements, a PhD dissertation submitted to the Materials Science and Engineering Department of Binghamton University, State University of New York
Material Extrusion Additive Manufacturing of Dense Pastes Consisting of Macroscopic Particles by a team from the Georgia Tech School of Chemical & Biomolecular Engineering
Photodegradation of Air and Water Contaminants Using 3D-Printed TiO2 Nanoparticle Scaffolds by a team from CIMAV - Subsede Monterrey and Chihuahua and Universidad Autónoma de Nuevo León
Enhancing Interfacial Layer Adhesion Strength in 3D Printable Soft Materials by a team from Georgia Southern University
A Comparative Study of Silver Microflakes in Digitally Printable Liquid Metal Embedded Elastomer Inks for Stretchable Electronics by a team from the Department of Mechanical Engineering, Carnegie Mellon University and the Department of Electrical Engineering, University of Coimbra
Hybrid Colloidal Gels with Tunable Elasticity Formed by Charge-Driven Assembly between Spherical Soft Nanoparticles and Discotic Nanosilicates by a team from the Department of Chemical Engineering and the Biomedical Engineering Program of the University of South Carolina
Effect of Additive Manufacturing onß-PhasePoly(Vinylidene Fluoride)-Based Capacitive TemperatureSensors by a team from the School of Engineering Technology, Purdue University
Silk Fibroin as a Bioink – A Thematic Review of Functionalization Strategies for Bioprinting Applications by a team from the National University of Singapore
Evaluation of Durability of 3D-Printed Cementitious Materials for Potential Applications in Structures Exposed to Marine Environments by a team primarily from the Lyles School of Civil Engineering, Purdue University
3D Printed Interdigitated Supercapacitor using Reduced Graphene Oxide-MnOx/Mn3O4 Based Electrodes by a team from the University of Tennessee, Knoxville
3D Printable Ceramic Pastes Design: Correlating Rheology & Printability by a team from Nano & Micro Additive Manufacturing of Polymers and Composite Materials Laboratory ‘‘3D LAB’’, Advanced Functional Materials & Nanotechnology Group, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Subsede Monterrey) and Materials Chemistry Department, Centro de Investigación en Materiales Avanzados S.C. (CIMAV-Chihuahua) in Mexico
2D Stationary Computational Printing of Cement-based Pastes by a team from the Department of Chemical Engineering, Tennessee Technological University
Investigation of 3D-printed Chitosan-Xanthan Gum Patches by a team from ten universities from Turkey, Poland, India, and the UK.
Additive Manufacturing of Carbon Steels Through Direct Ink Write Printing of Oxide Precursors, a thesis presented to Georgia Tech School of Materials Science and Engineering
Computer-Aided Tuning of Silica/poly(dimethylsiloxane) Composites for 3D Printing Process: A Computational and Experimental Study by a team from the Chemical Diagnostics and Engineering Group at Los Alamos National Laboratory, the Future Convergence Technology Research Institute, Gyeongsang National University, and the Korean Institute of Science and Technology
Scalable Mmanufacturing of Sustainable Packaging Materials with Tunable Thermoregulability by a team from the Departments of Chemical and Biomolecular Engineering, Materials Science and Engineering, and Chemistry of the University of California, Irvine
Charge-Density-Wave Thin-Film Devices Printed with Chemically Exfoliated 1T-TaS₂ Ink by a team from the Department of Chemistry, University of Georgia and the Departments of Electrical and Computer Engineering and Chemical and Environmental Engineering of the University of California, Riverside
Print Fidelity Metrics for Additive Manufacturing of Cement-based Materials, by a team from the US National Institute of Science and Technology (NIST) and the Departments of Chemical Engineering and Electrical and Computer Engineering of Tennessee Technological University
Compressive Properties and Failure Behavior of Photocast Hydroxyapatite Gyroid Scaffolds Vary with Porosity, by a team from the Schools of Advanced Materials Discovery and Biomedical Engineering from Colorado State University
UV-Assisted Direct Ink Writing of Si3N4/SiC Preceramic Polymer Suspensions by a team from the Materials and Manufacturing Directorate, US Air Force Research Laboratory
Application of Additively Manufactured 3D Scaffolds for Bone Cancer Treatment: a Review by a team from Department of Mechanical, Aerospace and Civil Engineering, School of Engineering, Faculty of Science and Engineering, The University of Manchester
The Use of Natural Products in 3D Printing of Pharmaceutical Dosage Forms by Centre for Natural Products Discovery, School of Pharmacy and Biomolecular Sciences, Liverpool John Moores University
Supplementary Information: Printable, Castable, Nanocrystalline Cellulose-Epoxy Composites Exhibiting Hierarchical, Nacre-like Toughening by a team from the Department of Mechanical Engineering and Department of Civil and Environmental Engineering of the Massachusetts Institute of Technology (MIT)
Recent Progress in Three-Dimensionally-Printed Dosage Forms from a Pharmacist Pperspective by a team from the School of Pharmacy, Faculty of Medicine and Health, University of Sydney, Procter & Gamble, and Department of Mathematical Sciences, Florida Institute of Technology
Wood Warping Composite by 3D Printing by a team from the Hebrew University of Jerusalem
Additive-Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels by a team from Institute for Nanostructure and Solid State Physics, Center for Hybrid Nanostructures (CHyN), The Hamburg Centre for Ultrafast Imaging, Center for X-ray and Nano Science CXNS, Deutsches Elektronen-Synchrotron DESY, Helmholtz Imaging Platform, Deutsches Elektronen-Synchrotron DESY, and Institute of Inorganic and Applied Chemistry, University of Hamburg
High-Temperature Interactions of Metal Oxides and a PVDF Binder by a team from University of Maryland, College Park
3D Printing of Ecologically Active Soil Structures by a team from the University of Virginia
In Vitro and In Vivo Evaluation of 3D Printed Sodium Alginate/Polyethylene Glycol Scaffolds for Sublingual Delivery of Insulin: Preparation, Characterization, and Pharmacokinetics by a team from Marmara University
Anisotropic Mechanical Behavior of 3D Printed Liquid Crystal Elastomer by a team from University of California, San Diego
Blue Ceramics: Co-designing Morphing Ceramics for Seagrass Meadow Restoration by a team from Carnegie Mellon University, the Hebrew University of Jerusalem, and Bezalel Academy of Art and Design
Microwave Stimulation of Energetic Al-Based Nanoparticle Composites for Ignition Modulation by a tem from the University of California, Riverside, Georgia Tech, and the University of Maryland
Processing of Preceramic Polymers for Direct-Ink Writing, a PhD dissertation submitted to University of Tennessee, Knoxville
Charge-Density-Wave Devices Printed with the Ink of Chemically Exfoliated 1T-TaS2 Fillers, by a team from the Nano-Device Laboratory and Phonon Optimized Engineered Materials Center, Department of Electrical and Computer Engineering, University of California, Riverside, the Department of Chemical and Environmental Engineering, University of California, Riverside, and the Department of Chemistry, University of Georgia
Functionalization of Thermoresponsive Hydrogels for Topical Delivery of Cellular and Pharmaceutical Payloads to the Intestine, a PhD dissertation submitted to Northeastern University's Department of Chemical Engineering

DIW/SEP/SSE, 2021

Synthesis of Magneto-Responsive Microswimmers for Biomedical Applications by a team from Engineering and Natural Sciences, Bahcesehir University and Maritime Higher Vocational School, Piri Reis University

Extrusion Increases the Mechanical Properties of 3D-Printable Nanocomposite Biomaterials, by a team from the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo

Synthetic Bone‐Like Structures Through Omnidirectional Ceramic Bioprinting in Cell Suspensions by a team from the University of New South Wales's Centre for Nanomedicine, School of Materials Science and Engineering, and School of Aerospace, Mechanical and Mechatronic Engineering

DIW/SEP/SSE, 2020

Multi-Material Additively Manufactured Composite Reactive Materials via Condinuous Filament Direct Ink Writing by a team from The Mechanical Engineering Department of Vanderbilt University
Designing 3D Printable Cementitious Materials with Gel-Forming Polymers by a team from the Departments of Chemical Engineering and Chemistry of Tennessee Technological University and the National Institute of Standards and Testing (NIST)
A Dual Approach in Direct Ink Writing of Thermally Cured Shape Memory Rubber Toughened Epoxy by a team from the Department of Macromolecular Science and Engineering, Case Western Reserve University and the Department of Chemistry, Chulalongkorn University, Thailand
Mechanics of Nozzle Clogging during direct ink writing of Fiber-Reinforced Composites by a team from the Materials and Manufacturing Directorate of the US Air Force Research Laboratoy, the University of Dayton Research Institute, the Mechanical, Aerospace, and Biomedical Engineering Department or the University of Tennessee and the Cornell High Energy Synchrotron Source
Composite Hydrogels and their application for 3D Bioprinting in Regenerative Medicine by from the Medical University of Varna, Bulgaria
Effects of Co3O4 Addition on Magnetic properties of NiCuZn Ferrite Feedstock for 3D-printing Power Magnetic Components by a team from Virginia Tech's Department of Materials Science and Engineering, Department of Electrical and Computer Engineering, and Center for Power Electronics Systems
Ecofriendly Production of Bioactive Tissue Engineering Scaffolds Derived from Egg- and Sea-shells by a team from the Department of Material Science and Engineering and the Department of Pathobiology, College of Veterinary Medicine, Nursing and Allied Health of Tuskegee University
Direct Ink Writing of a Light‐Responsive Underwater Liquid Crystal Actuator with Atypical Temperature‐Dependent Shape Changes by a team from the Stimuli-responsive Functional Materials & Devices (SFD) Group of the Department of Chemical Engineering and Chemistry of Eindhoven University of Technology
Silk Fibroin Reactive Inks for 3D Printing Crypt-like Structures by a team from the Polymer Program, Institute of Materials Science, University of Connecticut and the Chemical and Biomolecular Engineering, University of Connecticut
Additive-Free Carbon Particle Dispersions, Pastes, Gels, and Doughs a patent application from the Department of Molecular Biosciences of Northwestern University
Development of 3D-Printed Layered PLGA Films for Drug Delivery and Evaluation of Drug Release Behaviors by a team from the School of Pharmacy and Health Sciences, Fairleigh Dickinson University
3D Printing of Cytocompatible Gelatin‐Cellulose‐Alginate Blend Hydrogels by a team from the Engineering departments of Koç University and Bahcesehir University, both in Turkey
Effects of SiO2 Inclusions on Sintering and Permeability of NiCuZn Ferrite for Additive Manufacturing of Power Magnets by a multi-disciplinary team from Virginia Tech
Transparent Alumina Ceramics Fabricated by 3D Printing and Vacuum Sintering by a team from the Kazuo Inamori School of Engineering, New York State College of Ceramics, Alfred University, Alfred, NY
Additive Manufacturing and Characterization of AgI and AgI–Al2O3 Composite Electrolytes for Resistive Switching Devices, a paper from the US Air Force Research Laboratory using a Nordson head on a Hyrel printer.
Additively Manufactured Thermite-based Energetics: Characterization and Applications, a PhD dissertation submitted to the Mechanical Enginnering Department of Vanderbilt University
Effect of Sterilization Treatment on Mechanical Properties, Biodegradation, Bioactivity and Printability of GelMA Hydrogels (in Tissue Engineering) by a team from the Composite Biomaterial Systems Laboratory of the University of Waterloo
Impact of Filler Composition on Mechanical and Dynamic Response of 3-D Printed Silicone-based Nanocomposite Elastomers using a Nordson Ultimus™ V dispenser on Hyrel equipment, by a team from Los Alamos National Laboratory, Sandia National Laboratory, and Department of Energy Engineering, Gyeongnam National University of Science and Technology (South Korea)
Fabrication and Characterization of Fe₁₆N₂ Micro‐Flake Powders and Their Extrusion Based 3D Printing into Permanent Magnet Form by a multi-disciplinary, multi-university team from Istanbul, Turkey
Cement-Based Direct Ink for 3D Printing of Complex Architected Structures , a patent application by a team including members of Department of Materials Science and NanoEngineering, Rice University
Reactive 3D Printing of Shape Programmable Liquid Crystal Elastomer Actuators by a team from the Department of Materials Science and NanoEngineering of Rice University
Injectable Gelatin Microgel-based Composite Ink for 3D Bioprinting in Air by a team from the University of Florida's Biomedical Engineering Department
Enabling Compact GTL by 3D-Printing of Structured Catalysts by a team from The University of Queensland's School of Chemical Engineering and Australian Institute for Bioengineering and Nanotechnology and also by The Australian Petroleum International Exploration and Development (APIED)
Bio-Ink Structures and Methods of Producing the Same, a patent application by Lawrence Livermore National Laboratory
3D Printing of Transparent YAG Ceramics using Copolymer-Assisted Slurry by a team from The New York State College of Ceramics at Alfred University
On Design for Additive Manufacturing (DAM) Parameter and Its Effects on Biomechanical Properties of 3D Printed Ceramic Scaffolds by a team mostly from Australian Universities.
All 3D-printed Stretchable PiezoElectric NanoGenerator (PENG) with Non-protruding Kirigami Structure by a team from The School of Materials Science and Engineering, Nanyang Technological University and Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)
Opportunities and Challenges of 3D-Printed Pharmaceutical Dosage Forms by Adam Procopio from Merck Pharmceuticals
Experimental Observation of the Heat Transfer Mechanisms that drive Propagation in Additively Manufactured Energetic Materials by a team from the Department of Chemical and Environmental Engineering, University of California, Riverside and the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park
3D Printable Magnesium Oxide Concrete: Towards Sustainable Modern Architecture by a team from New York University, Abu Dhabi
Soldered Copper Lap Joints using Reactive Material Architectures as a Heat Source by a team from the Department of Mechanical Engineering, Vanderbilt University
Combustion of 3D Printed 90 WT% Loading Reinforced Nanothermite by a team from the Department of Chemical and Environmental Engineering, University of California, Riverside and the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park
Photocurable Pentaerythritol Triacrylate/Lithium Pphenyl‐2,4,6‐trimethylbenzoylphosphinate‐based Ink for Extrusion‐based 3D Printing of Magneto‐responsive Materials by a team from Bahçeşehir University, Piri Reis University, and Sabanci University in Istanbul
Spatially Focused Microwave Ignition of Metallized Energetic Materials, by a team from the Engineering Departments of University of California, Riverside and the University of Maryland.
Additive Manufacturing with Strontium Hexaferrite-Photoresist Composite by a team from several departments at The University of California, Los Angeles (UCLA)
Early-Age Performance of 3D Printed Carbon Nanofiber and Carbon Microfiber Cement Composites by a team from the Department of Civil and Environmental Engineering, Vanderbilt University
Cross-linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects by a team from the University of Florida's Biomedical Engineering Department

DIW/SEP/SSE, 2019

Graphene Foam-Reinforced Shape Memory Polymer Epoxy Composites, a PhD paper submitted to Florida International University
Biodegradable Polymer Blends for Food Packaging Applications, a chapter in "Food Packaging: Innovations and Shelf-Life", by a team from The Department of Materials Science and Engineering of Tuskegee University
Analysis of Free Chlorine in Aqueous Solution at Very Low Concentration with Lateral Flow Tests by TU Darmstadt
Intrinsic Thermal Desorption in a 3D Printed Multi-Functional Composite CO2 Sorbent with Embedded Heating Capability by a team from the Boulder Experimental Electronics and Manufacturing Laboratory of the University of Colorado, Boulder
3D Printing an Electrode of Living Bacteria by a team from Department of Chemistry and Biochemistry, University of CaliforniaSanta Cruz
Ignition and Combustion Analysis of Direct Write Fabricated Aluminum/Metal Oxide/PVDF Films, by a team from the Engineering Departments of University of California, Riverside and the University of Maryland.
Hydroxyapatite Structures Created by Additive Manufacturing with Extruded Photopolymer by a team from the Colorado State University College of Engineering
Rheological Considerations for Binder Development in Direct Ink Writing of Energetic Materials by a team from the School of Materials Science and Engineering (MSE) at Georgia Tech
3D Printed Layer of Polyaniline-Based Conductive Polymer for Lightning Strike Protection of Carbon Fiber Reinforced Plastics (CFRPs) by a team from Oak Ridge National Laboratory
Bioprinting Technologies in Tissue Engineering, part of the Advances in Biochemical Engineering/Biotechnology book series.
3D-Printability of Aqueous poly(ethylene oxide)(PEO) Gels by a team primarily from the Faculty of Medicine, University of Tartu, Estonia
A New Approach to 3D Printing Dense Ceramics by Ceramic Precursor Binders by Prof. Shlomo Magdassi's group at The Hebrew University of Jerusalem
Additive Manufacturing of 3D Structures Composed of Wood Materials by Prof. Shlomo Magdassi's group at The Hebrew University of Jerusalem
Three-Dimensional Printing Control, a patent application by a team from Chromatic 3D Materials
Methods and systems for precision application of agents to a target surface, a patent application by a team from Procter & Gamble
hBN-Acrylate Composite Printing: Stereolithography and UV-Assisted Direct Write, a Masters' Thesis from the University of Connecticut
Printability of Methacrylated Gelatin upon Inclusion of a Chloride Salt and Hydroxyapatite Nano‐Particles by a team from the Composite Biomaterial Systems Laboratory, Systems Design Engineering, University of Waterloo
Extremely Stretchable and Self-Healing Conductor Based on Thermoplastic Elastomer for All-Three-Dimensional Printed Triboelectric Nanogenerator by a team from The School of Materials Science and Engineering, Nanyang Technological University and Singapore-HUJ Alliance for Research and Enterprise (SHARE), Nanomaterials for Energy and Water Nexus (NEW), Campus for Research Excellence and Technological Enterprise (CREATE)
Printing Therapeutic Proteins in 3D using Nanoengineered Bioink to Control and Direct Cell Migration by a team by a team from Texas A&M University.
Bactericidal Activity of 3D-printed Hydrogel Dressing Loaded with Gallium Maltolate by a team from the Department of Biomedical Engineering, Texas A&M University
Extrudable Hydroxyapatite / Plant Oil-based Biopolymer Nanocomposites for Biomedical Applications: Mechanical Testing and Modeling by a team from The Systems Design Engineering Department of The University of Waterloo, Canada
3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam by a team from the Macromolecular Science & Engineering Department of Case Western Reserve University
Extrusion Printing of Liquid Crystal Elastomers, a patent application by a team from the Bioengineering Department of the University of Texas, Dallas
Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components by a team from Virginia Tech
3D Printing of a Thermo- and Solvatochromic Composite Material Based on a Cu(II)–Thymine Coordination Polymer with Moisture Sensing Capabilities by a team from Nanyang Technological University (Singapore) and the Hebrew University of Jerusalem)
Advancing Frontiers in Bone Bioprinting, by a team primarily from The University of California at Los Angeles
Direct Writing of Tunable Living Inks for Bioprocess Intensification in ACS's Nano Letters
Gellan Fluid Gel as a Versatile Support Bath Material for Fluid Extrusion Bioprinting by a team from the University of Florida's Biomedical Engineering Department
Microwave Control of Composite Solid Propellant Flame Spread Through Eddy Current Heating of Wired/Foiled Propellant by a team from Iowa State University's Mechanical Engineering Department
Developments of 3D polycaprolactone/beta-tricalcium phosphate/collagen Scaffolds for Hard Tissue Engineering by a multi-disciplinary, multi-university team from Istanbul, Turkey
3D Printing of Poloxamer 407 Nanogel Discs and Their Applications in Adjuvant Ovarian Cancer Therapy by a team from the St. Louis College of Pharmacy

DIW/SEP/SSE, 2018

Nano Silica-Carbon-Silver Ternary Hybrid Induced Antimicrobial Composite Films for Food Packaging Application by a team from the Materials Science & Enginnernig Department of Tuskegee University
Additive Manufacturing of Alumina Components by Extrusion of in-situ UV-Cured Pastes by a team from Sandia National Laboratory and The University of New Mexico's Center for MicroEngineered Materials
Hydrocolloid Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone by a team from the School of Aerospace, Mechanical and Mechatronic Engineering, University of Sydney and the School of Chemistry, University of New South Wales, Sydney
Hydrocolloid Inks for 3D Printing of Porous Hydrogels by a team with members from The Department of Biomedical Engineering, Texas A&M University, The Department of Biomedical Engineering, University of Texas at Austin, and The Department of Chemical and Materials Engineering, New Mexico State University
Improved In Situ Seeding of 3D Printed Scaffolds using Cell-Releasing Hydrogels by a team with members from The Department of Biomedical Engineering, Texas A&M University, The Department of Biomedical Engineering, University of Texas at Austin, and The Department of Bioengineering, Rice University.
Effect of Silk-Based Hydrogel Topography on Intestinal Epithelial Cell Morphology and Wound Healing In Vitro a thesis by Marisa E. Boch from the Department of Chemical and Biomolecular Engineering at the University of Connecticut
Compressible, Thermally Insulating, and Fire Retardant Aerogels through Self-Assembling Silk Fibroin Biopolymers Inside a Silica Structure - An Approach towards 3D Printing of Aerogels by a team from the Chemistry and Physics of Materials Department of The University of Salzburg and School of Inorganic Chemistry at The University of Cologne.
Covalent-Supramolecular Hybrid Polymers as Muscle-Inspired Anisotropic Actuators by an interdisciplinary team from Northwestern University. The 3D printing experiments were supported by the Air Force Research Laboratory under agreement number FA8650-15-2-5518
Fully 2D and 3D Printed Anisotropic Mechanoluminescent Objects and their Application for Energy Harvesting in the Dark by Prof. Shlomo Magdassi's group at The Hebrew University of Jerusalem.
Additive-free Carbon Nanotube Dispersions, Pastes, Gels, and Doughs in Cresols by a team from Northwestern University
3D Printing of Hierarchical Porous Silica and α‐Quartz by a team from The University of Salzburg
Polymeric Materials and Articles Manufactured There From by a team from Procter and Gamble
UV-curable Ferrite Paste for Additive Manufacturing of Power Magnetics by a team from Virginia Tech
Tailoring the Porosity and Microstructure of Printed Graphene Electrodes via Polymer Phase Inversion by a team from Northwestern University

DIW/SEP/SSE, 2017

Injectable Nanocomposite Hydrogels for Cell Delivery and Bioprinting by a team by a team from three disciplines of Texas A&M University.
Feasibility of Printing 3D Bone Models for Education at TUCVM at ResearchGate
Design and Additive Manufacturing of Multi-Permeability Magnetic Cores, by a team from Virginia Tech
Combustion-Assisted Photonic Annealing of Printable Graphene Inks via Exothermic Binders, by a team from Northwestern Univeristy
In Vitro Evaluation of 3D Bbioprinted Tri-Polymer Network Scaffolds for Bone Tissue Regeneration, by a team from The University of Connecticut
Enabling Process Intensification via 3D Printing of Catalytic Structures by a team from University of Queensland
3D Bioprinting for Musculoskeletal Applications by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in Future Medicine
UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration by Dr. Y. Yan (and others), Virginia Tech
Alginate Hydrogels for Bone Tissue Regeneration by Stephanie T. Bendtsen of The University of Connecticut
Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing by Nicholas Sears et. al., of the Biomedical Engineering Department of Texas A&M University.
Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties by a team from Tuskegee University
Design Methodology and Materials for Additive Manufacturing of Magnetic Components - PhD Thesis of Y. Yan, Virginia Tech

DIW/SEP/SSE, 2016

DIW/SEP/SSE, 2015

3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense - Presentation by Elizabeth Cosgriff-Hernández of Department of Biomedical Engineering, Texas A&M University
Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo from multiple organizations, at BioMaterials.org
Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept by the Department of Materials Science and Engineering of Lehigh University
Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach in The American Chemical Society's ACS Nano

DIW/SEP/SSE, 2014

Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects from The Biomaterials and Tissue Engineering Research Unit of the Aerospace, Mechanical and Mechatronic Engineering Department of The University of Sydney

Heated Reservoir Printing (DPE, HME)

Also known as DPE (Direct Powder Extrusion) or HME (Hot Melt Extrusion).

DPE, HME 2024

DPE, HME 2023

DPE, HME 2022

3D Printing of Liquid Metal Embedded Elastomers for Soft Thermal and Electrical Materials by a team from Carnegie Mellon University's Mechanical and Chemical Engineering Departments; the Department of Mechanical and Automation Engineering, Chinese University of Hong Kong, and the Department of Mechanical Engineering, Seoul National University
Robotic Pick-and-Place Operations in Multifunctional Liquid Crystal Elastomers by a team from Eindhoven University of Technology's Institute for Complex Molecular Systems and Department of Chemical Engineering and Chemistry, the Instituto de Nanociencia y Materiales de Aragón (INMA)Departamento de Física de la Materia CondensadaCSIC-Universidad de Zaragoza, the CIBER in Bioengineering, Biomaterials and Nanomedicine, and the [ SCNU-TUE Joint Lab of Device Integrated Responsive Materials (DIRM), National Center for International Research on Green Optoelectronics, South China Normal University]
Development of Embeddable Additive Manufacturing Microsensors for Structural Health Monitoring, by a team from Embry-Riddle Aeronautical University
Continuous, Non-Destructive Detection of Surface Bacterial Growth with Bioinspired Vascularized PolymersGrowth with Bioinspired Vascularized Polymers, submitted to the University of Maine in pursuit of a Master of Science in Biomedical Engineering
A Novel Dynamic Polymer Synthesis via Chlorinated Solvent Quenched Depolymerization by a team from Oak Ridge National Laboratory's Chemical Services Division and Center for Nanophase Materials Sciences; University of Tennessee, Knoxville's Department of Chemistry and Department of Chemical and Biomolecular Engineering; and Beijing University of Chemical Technology
Alginate–Sodium Sulfate Decahydrate Phase Change Composite with Extended Stability by a team from Chemical Sciences Division, Oak Ridge National Laboratory, Building and Transportation Sciences Division, Oak Ridge National Laboratory, and the Department of Chemistry, University of Tennessee, Knoxville
Continuous, Non-Destructive Detection of Microorganism Growth at Buried Interfaces with Vascularized Polymers by a team from the Biomedical Science and Engineering, University of Maine, the Department of Mechanical Engineering and Material Science, Duke University, and the [Pritzker School of Molecular Engineering, University of Chicago https://pme.uchicago.edu/]
Comparing the Cpabilities of Vibration-Assisted Printing (VAP) and Direct-Write Additive Manufacturing Techniques by a team from Purdue University and Naval Postgraduate School
Characterization of Micro-Sandwich Structures via Direct Ink Writing Epoxy Based Cores by a team from various engineering departments at The University of Tennessee, Knoxville
Emulsion Templated Porous Funnel from Polypropylene Waste for Efficient Oil Separation and Spillage Management by a team from the Department of Textile Technology, Indian Institute of Technology - Delhi
Material Synthesis and Machine Learning for Additive ManufacturingManufacturing, a Master's Thesis submitted to the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso
Material Synthesis and Additive Manufacturing of Ceramics, a Master's Thesis submitted to the Department of Aerospace and Mechanical Engineering, University of Texas at El Paso
Cholesteric Liquid Crystals in Additive Manufacturing, a doctoral dissertation submitted to the Laboratory of Stimuli-Responsive Functional Materials and Devices (SFD), Department of Chemical Engineering and Chemistry, Eindhoven University of Technology (TU/e)
Development of Advanced 3D-Printed Solid Dosage Pediatric Formulations for HIV Treatment by a team from Trinity College Dublin, Complutense University of Madrid, and King Abdulaziz University
An Additive Manufacturing-based 3D Printed Poly ɛ-CaproLactone (PCL) / Alginate Sulfate / Cxtracellular Matrix Construct for Nasal Cartilage Regeneration, by a team from Texas A&M International University, Iran University of Medical Sciences, and the University of Tehran

DPE, HME 2021

Effects of Crosslinking on the Physical Solid-State and Dissolution Properties of 3D-printed Theophylline Tablets by a team from the Institute of Pharmacy and the Institute of Biomedicine and Translational Medicine of the University of Tartu and from the Division of Pharmaceutical Chemistry and Technology, Faculty of Pharmacy, University of Helsinki
Understanding Direct Powder Extrusion for Fabrication of 3D Printed Personalised Medicines: A Case Study for Nifedipine Minitablets, a study by a team from the Department of Pharmaceutics and Food Science, Facultad de Farmacia, Universidad Complutense de Madrid,and the Biomaterials, Bio-Engineering and Nanomedicine (BioN) Lab, Institute of Biomedical and Biomolecular Sciences, School of Pharmacy and Biomedical Sciences, University of Portsmouth
Printable Elastomeric Electrodes with Sweat‑Enhanced Conductivity for Wearables by a team primarily from Nanyang Technological University, Singapore
Fabrication and Testing of Advanced Composites for Extreme Environments, a Master's dissertation submitted to the Mechanical Engineering Department of Texas A&M University
Wound Healing: From Passive to Smart Dressings by a team from Department of Biomedical Engineering, Amirkabir University of Technology, Tehra and UQ Diamantina Institute, Translational Research Institute, The University of Queensland
3D Printing of Polyvinylidene Fluoride Based Piezoelectric Nanocomposites: An Overview by a tea, from Eskişehir Technical University, Turkey
3D Printing Compositesfrom Raw Materials, a Master Thesis submitted to Lund University
Soft Elasticity Optimises Dissipation in 3D-Printed Liquid Crystal Elastomers by a team from the Department of Mechanical Engineering, University of Colorado, Denver, School of Physics and Astronomy, University of Leeds, Materials and Failure Modeling Department, Sandia National Laboratories, and Impressio, Inc.
3D-Printed Enzyme-Embedded Plastics by a team from Scion, a Crown Research Institute in New Zealand

DPE, HME 2020

Study of Recyclable and Repairable Dynamic Covalent Polymers for Sustainable 3D Printing Development for Sustainable 3D Printing Development, a thesis for a PhD in Mechanical and Materials Engineering submitted to The University of Western Ontario
Toward Multifunctional Liquid Metal Composites, a video by a team from the Department of Mechanical Engineering, Carnegie Mellon University
Controlled Assembly of Liquid Metal Inclusions as a General Approach for Multifunctional Composites by a team from the Department of Mechanical Engineering, Carnegie Mellon University
Syngas to Higher Alcohols Synthesis over 3D Printed KMoCo/ZSM5 Monolith by a team from the Australian Institute for Bioengineering and Nanotechnology (AIBN) of The University of Queensland
Extrusion 3D Printing of Porous Silicone Architectures for Engineering Human Cardiomyocyte-Infused Patches Mimicking Adult Heart Stiffness by a team from the Department of Mechanical and Materials Engineering of Florida International University
Temperature and Solvent Facilitated Extrusion Based 3D Printing for Pharmaceuticals by a team from School of Pharmacy and Biomedical Sciences, University of Central Lancashire
3D Printed Food and Customized Silicone Molds: Investigating Aesthetic Appearance and Food Preparing Methods for a Dysphagia Diet, a Master's paper submitted to the Mechanical Engineering Department of Halmstad University of Sweden
Inkjet-Printed Iontronics for Transparent, Elastic, andStrain-Insensitive Touch Sensing Matrix by a team from the School of Materials Science and Engineering at Nanyang Technological Univeristy and University of Electronic Science and Technology of China
Mechanical Properties of Nanocomposite Biomaterials improved by extrusion during Direct Ink Writing by a team from the Composite Biomaterial Systems Laboratory of the Systems Design Engineering School at the University of Waterloo, Canada

DPE, HME 2019

Vascularized Polymers Spatially Control Bacterial Cells on Surfaces by a team from the Department of Chemical and Biomedical Engineering, University of Maine
Dynamically Crystalizing Liquid‐Crystal Elastomers for an Expandable Endplate‐Conforming Interbody Fusion Cage by a team from the College of Engineering, Design and Computing, University of Colorado Denver
Development of an Open-Sourced Automated Ultrasonic-Assisted Soldering System, by a team from the Department of Mechanical Engineering of Clemson University
Acoustic Analysis of Ultrasonic Assisted Soldering for Enhanced Adhesion, by a team from the Department of Mechanical Engineering of Clemson University
Preparation and Applications of Stimuli-Responsive Composite Materials, a PhD dissertation from the Case Western Reserve University Department of Chemistry.
In-operando High-speed Microscopy and Thermometry of Reaction Propagation and Sintering in a Nanocomposite by a team from the Department of Chemical and Environmental Engineering, University of California, Riverside and the Department of Chemical and Biomolecular Engineering, University of Maryland, College Park
Comparison study of the ignition and combustion characteristics of directly-written Al/PVDF, Al/Viton and Al/THV composites by a team from the Department of Chemical and Biomolecular Engineering and Department of Chemistry and Biochemistry, University of Maryland
A Proof of Concept for 3D Printing of Solid Lipid-Based Formulations of Poorly Water-Soluble Drugs to Control Formulation Dispersion Kinetics by a team including the University College London School of Pharmacy
Architecture can Significantly Alter the Energy Release Rate from Nanocomposite Energetics by a team from University of Maryland's Dept. of Physics
Comparative Characterization of the Hydrogel Added PLA/β-TCP Scaffolds Produced by 3D Bioprinting by a team from Marmara University, Turkey
3D Printing of Thermoreversible Polyurethanes with Targeted Shape Memory and Precise In-Situ Self-Healing Properties by Yue Zhang, Xiangyu Yin, Mingyue Zheng, Carolyn Moorlag, Jun Yang and Zhonglin Wang.
Additive Processing of Fluoroelastomers, a patent application by a team from 3M
Additive Processing of Fluoropolymers, a patent application by a team from 3M

DPE, HME 2018

DPE, HME 2017

Filament Printing (FFF, FDM)

Also known as FFF (Fused Filament Fabrication) or FDM (Fused Deposition Modeling).

FDM/FFF, 2024

FDM/HFF, 2023

FDM/HFF, 2022

FDM/HFF, 2021

Effective Reinforcement of Engineered Sustainable Biochar Carbon for 3D Printed Polypropylene Biocomposites from a team from Tuskegee University
Fabrication and Characterization of Polycarbonate-Silica Filaments for 3D Printing Applications by a team from Tuskegee University
Sequentially Tunable Buckling in 3D Printing Auxetic Metamaterial Undergoing Twofold Viscoelastic Resonances, by a team from Harbin Institute of Technology, China, Northwestern Polytechnical University, China, and School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore
Synthesis and Characterization of Functiona Materials for 3D Printed Composites, a Master's thesis submitted to the Mechanical Engineering Department of Texas A&M University
Novel Architected Material for Cardiac Patches by a team from the Department of Mechanical Engineering, University of Texas at San Antonio
Boron Nitride Nanotubes for Heat Dissipation in Polycaprolactone Composite by a team from Department of Chemistry, Duke University and Université Grenoble Alpes
3D Printing of Supramolecular Polymer Hydrogels with Hierarchical Structure by a team from Northwestern University's Department of Materials Science and Engineering and Simpson Querrey Institute and the Soft Materials Branch of the Materials and Manufacturing Directorate, Air Force Research Laboratory

FDM/HFF, 2020

FDM/HFF, 2019

Bioresorbable Composite Stents for Enhanced Response of Vascular Smooth Muscle Cells by H. Mozafari from The Department of Mechanical & Materials Engineering at the University of Nebraska - Lincoln
The Impact of 3D Printing Process Parameters on the Dielectric Properties of High Permittivity Composites by a team from Loughborough University
Additive Manufacturing of Multi-Material Systems for Aerospace Applications by a team from NASA's Glenn Research Center
Material Extrusion-Based Additive Manufacturing of Polypropylene: A Review on How to Improve Dimensional Inaccuracy and Warpage, in the Journal of Applied Polymer Science
Magnetic 3D Printing of Hexaferrite Material, a PhD dissertation from the University of California, Los Angeles (UCLA) Electrical and Computer Engineering Department.
Prediction and Experimental Validation of Part Thermal Historyin Fused Filament Fabrication Additive Manufacturing Process by a team from SUNY Buffalo's Department of Mechanical and Aerospace Engineering, Department of Materials Design and Innovation, and Department of Industrial and Systems Engineering and the University of Nebraska-Lincoln Department of Mechanical and Materials Engineering
Gastric Residence Systems for Sustained Delivery of Adamantane-class Drugs by a team from Lyndra Theraputics
Gastric Resident Electronics a patent application by a team from the the Massachusetts Institute of Technology (MIT)
Smart Additive Manufacturing Using Advanced Data Analytics and Closed Loop Control, A Dissertation Presented to The Academic Faculty of the Grado Department of Industrial and Systems Engineering (ISE) at Virginia Tech
The Advent of a Novel Manufacturing Technology in Pharmaceutics: Superiority of Fused Deposition Modeling 3D Printer by a team from the College of Pharmacy and the Yonsei Institute of Pharmaceutical Sciences, Yonsei University
On the thermal processing and mechanical properties of 3D-printed polyether ether ketone (PEEK) by a team from the Department of Macromolecular Sciences & Engineering, Case Western Reserve University School of Engineering and the Key Laboratory of E&M, Zhejiang University of Technology
Composites based on metallic particles and tuned filling factor for 3D-printing by Fused Deposition Modeling by a team from IMDEA Nanociencia in Madrid
3D printing of Auxetic Metamaterials with Digitally Reprogrammable Shape by a team from the Georgia Tech School of Mechanical Engineering
Automated Fiber Embedding for Tailoring Mechanical and Functional Properties of Soft Robot Components by the Singapore University of Technology and Design's (SUTD) DManD (Digitial Manufacturing and Design) Center
Image Analysis-Based Closed Loop Quality Control for Additive Manufacturing with Fused Filament Fabrication by a team from the Virginia Tech Grado Department of Industrial and Systems Engineering
Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing by a team from the Chemistry and Macromolecular Science & Engineering Departments of Case Western Reserve University
Chapter 7 - Additive Manufacturing of Polyaryletherketones in the PEEK Biomaterials Handbook
Fast Scanning Calorimetry for Semicrystalline Polymers in Fused Deposition Modeling by a team from The Materials Science and Engineering School of Georgia Tech

FDM/HFF, 2018

Synthesis and Characterization of Novel Bioplastics by innovative 3D Printing Approaches, a Masters Thesis by Kathryn Hall from the University of North Dakota
Mechanical Characterizations of 3D-printed PLLA/Steel Particle Composites by a team from the Department of Mechanical & Materials Engineering, University of Nebraska-Lincoln
Precision Enhancement of 3D Printing via in-situ Metrology by a team from UCLA's Mechanical and Aerospace Engineering and Electrical and Computer Engineering Departments and the NanoSystems Institute
Feedstock for 3D Printing and Uses Thereof Patent application by a team from The University of Southern Denmark
Interlayer Bonding Improvement of Material Extrusion Parts with Polyphenylene Dulfide Using the Taguchi Method by a team from the Georgia Tech School of Materials Science and Engineering
3D Printed Sustainable Biochar-Recycled PET Composite by a team from Tuskegee University
Monitoring Temperature in Additive Manufacturing with Physics-Based Compressive Sensing by a team from [www.me.gatech.edu The Mechanical Engineering School at Georgia Tech]
3D Printed Acoustic Metamaterial Sound Absorbers using Functionally-Graded Sonic Crystals by a team from the US Naval Research Laboratory
Pharmaceutical 3D Printing: Design and Qualification of a Single Step Print and Fill Capsule by a team from Merck Pharmaceuticals
Fabrication and Properties of Novel Polymer-Metal Composites using Fused Deposition Modeling by the Mechanical Engineering Staff at Worcester Polytechnic Institute

FDM/HFF, 2017

FDM/HFF, 2016

High Temperature Thermoplastic Additive Manufacturing Using Low-Cost, Open-Source Hardware published by NASA