Difference between revisions of "ESR"
Jump to navigation
Jump to search
| Line 5: | Line 5: | ||
|} | |} | ||
== ESR - Engine, | == ESR - Engine, Standard Resolution == | ||
The | The ESR is our leading unenclosed desktop printer. | ||
[[File:ENG.jpg|600px]] | |||
For reference, the initial Engine configurations were as follows: | For reference, the initial Engine configurations were as follows: | ||
Revision as of 17:18, 29 January 2021
ESR - Engine, Standard Resolution
The ESR is our leading unenclosed desktop printer.
For reference, the initial Engine configurations were as follows:
| Model | E1 Tinkerer DISCONTINUED |
E2 Hobbyist DISCONTINUED |
E3 Apprentice SEE Engine SR |
E4 Journeyman DISCONTINUED |
E5 Professional DISCONTINUED |
|---|---|---|---|---|---|
| Heated Build Platform | no | yes | yes | yes | yes |
| Integrated PC & Touchscreen or Tablet PC |
no | no | yes | yes | yes |
| Initial Heads | 1 | 1 | 1 | 2 | 4 |
| Maximum Heads | 4 | 4 | 4 | 4 | 4 |
Technical Data
Adjustments
- Speed of travel (at slicing or in g-code editor)
- Layer thickness (at slicing)
- Volume of flow per unit distance (at slicing or in g-code editor)
- Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
- Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
- HotBed Temperature (at slicing, in g-code editor, or manually during build)
Or, is tabular better?
| Metric | Units | During Slicing | In G-Code Editor | GUI During Build |
|---|---|---|---|---|
| Speed of Travel | mm/min | yes | yes | no |
| Layer Thickness | mm | yes | no | no |
| Flow Rate | nL/sec | yes | yes | yes |
| Extruder Temperature | °C | yes | yes | yes |
| Fan Speed | % of max | yes | yes | yes |
| HotBed | °C | yes | yes | yes |