ESR

From Hyrel3D
Revision as of 17:14, 29 January 2021 by Davo (talk | contribs) (Created page with "Category:Hardware Category:Printers {| align="right" | __TOC__ |} == Engine Models == The Engine is the unenclosed model, and may be configured as follows: {| bor...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Engine Models

The Engine is the unenclosed model, and may be configured as follows:

CURRENT Engine Model Comparison - as of January, 2021
Model Engine SR
Standard Resolution
Engine HR
High Resolution
Image
Heated Build Platform yes yes
Integrated Tablet PC yes yes
Initial Heads 1 1
Maximum Heads 4 3
X/Y-Axes Motion Control Belts Precision Ball Screws
Z-Axis Motion Control Precision Ball Screw Precision Ball Screw
Positional Resolution
X / Y / Z in μm
<10 / <10 / <1 <1.25 / <1.25 / <1
Positional Accuracy
X / Y / Z in μm
<50 / <50 / <10 <12 / <12 / <10
Positional Repeatability
X / Y / Z in μm
<25 / <25 / <5 <12 / <12 / <5
Precise X/Y Output
for Bioplots
100 μm lines
200 μm spacing
50 μm lines
100 μm spacing
Precise Z output
for Bioplots
25 μm layers 25 μm layers


For reference, the initial Engine configurations were as follows:

OLD Engine Model Comparison - DISCONTINUED
Model E1
Tinkerer
DISCONTINUED
E2
Hobbyist
DISCONTINUED
E3
Apprentice
SEE Engine SR
E4
Journeyman
DISCONTINUED
E5
Professional
DISCONTINUED
Heated Build Platform no yes yes yes yes
Integrated PC
& Touchscreen
or Tablet PC
no no yes yes yes
Initial Heads 1 1 1 2 4
Maximum Heads 4 4 4 4 4

Technical Data

Adjustments

  • Speed of travel (at slicing or in g-code editor)
  • Layer thickness (at slicing)
  • Volume of flow per unit distance (at slicing or in g-code editor)
  • Extruder temperature (at slicing, in g-code editor, or manually during build) (MK-1, VOL-25)
  • Cooling Fan speed (at slicing, in g-code editor, or manually during build (MK-1, QS-1)
  • HotBed Temperature (at slicing, in g-code editor, or manually during build)

Or, is tabular better?

Adjustments
Metric Units During Slicing In G-Code Editor GUI During Build
Speed of Travel mm/min yes yes no
Layer Thickness mm yes no no
Flow Rate nL/sec yes yes yes
Extruder Temperature °C yes yes yes
Fan Speed % of max yes yes yes
HotBed °C yes yes yes