Difference between revisions of "Head Overview"

From Hyrel3D
Jump to navigation Jump to search
Line 145: Line 145:
|-
|-
! [[SDS]]-30XT
! [[SDS]]-30XT
| [[File:SDS30XT.png|50px]]
| [[File:SDS30XT.jpg|50px]]
| Liquid, Gel
| Liquid, Gel
| Up to 300,000 cP
| Up to 300,000 cP

Revision as of 20:42, 24 February 2021

Hyrel 3D Printers offer a variety of modular print heads, which are compared below.

Modular Heads Comparison

The following chart compares and contrasts the various extrusion heads:

Extrusion Heads Comparison
Designation Image Material Viscosity Power Volume Reservoir Temperature UV LEDs? Other
MK1-250 MK1-250.png 1.75mm Filament Standard NEMA 11
1:1
n/a n/a Up to 250°C n/a For Standard Material
MK1-450 MK1-450.png 1.75mm Filament Exotic NEMA 11
1:1
n/a n/a 300 to 450°C n/a For High-Temp Material
MK2-250 MK2-250.png 1.75mm Filament Flexible NEMA 11
1:1
n/a n/a Up to 250°C n/a For Flexible Material
HT1-250 HT.jpg 1.75mm Filament Standard NEMA 17
5.18:1
Higher Torque Available
n/a n/a Up to 250°C n/a For Standard Material
HT1-450 HT.jpg 1.75mm Filament Exotic NEMA 17
5.18:1
Higher Torque Available
n/a n/a 300 to 450°C n/a For High-Temp Material
HT3-250 HT.jpg 2.85mm Filament Standard NEMA 17
14:1
Higher Torque Available
n/a n/a Up to 250°C n/a For Standard Material
HT3-450 HT.jpg 2.85mm Filament Exotic NEMA 17
14:1
Higher Torque Available
n/a n/a 300 to 450°C n/a For High-Temp Material
SDS-1 SDS1.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
1cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-05 SDS5.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
05cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-10 SDS10.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
10cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-30 SDS30.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene Ambient Optional Disposable Reservoir
Normal Torque
SDS-30XT SDS30XT.jpg Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
30cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
SDS-60 SDS60.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-60XT 50px Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
SDS-150XT 50px Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
DSD-50 50px Two-part Mixtures Up to 100,000 cP NEMA 11
1:1
25cc each part Polypropylene Ambient Optional
~50 mW
Disposable Reservoirs
Normal Torque
1:1, 2:1, 3:1 Blend Ratios
SMH-2 SMH2.jpg Two-part Mixtures Up to 100,000 cP NEMA 11
1:1 Gear Ratio
Up to 150cc each part Depends on feeding heads Ambient Optional
~50 mW
*Fed by other heads
Variable Blend Ratios
HSD-10-Ardes HSD10 syringe.jpg Liquid, Gel Up to 100,000 cP NEMA 11
1:1
10cc Polyamide Up to 75°C Optional
~50 mW
n/a
HSD-30-BD HSD30.jpg Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene Up to 50°C Optional
~50 mW
Disposable Reservoir
Normal Torque
RSD-30-BD RSD-30.jpg Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene -5°C to 80°C Optional
~50 mW
Disposable Reservoir
Normal Torque
EMO EMO-25.png Liquid, Gel, Paste Up to 300,000 cP NEMA 11
19:1, 27:1
25cc Aluminum Ambient Optional
~50 mW
Reusable Reservoir
Normal Torque
VOL VOL-25.png Liquid, Gel, Paste Up to 300,000 cP NEMA 11
51:1
25cc Aluminum Up to 90°C Optional
~50 mW
Reusable Reservoir
Normal Torque
KR2 KR2.jpg Paste, Clay, Hot Glue Up to 1,000,000 cP NEMA 11
100:1
15cc Stainless Up to 180°C Optional
~50 mW
Reusable Reservoir
High Torque
TAM TAM.jpg Paste, Clay, Hot Glue Up to 1,000,000 cP NEMA 11
100:1
15cc Stainless Up to 270°C Optional
~50 mW
Reusable Reservoir
High Torque
UVP-365 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 365nm Focusable
UVP-405 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 405nm Focusable
UVP-450 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 450nm Focusable
Lasers, 808 nm LA5-6.jpg Dark, Opaque Laser 5 W n/a n/a n/a n/a 5 W, 808 nm
Lasers, 450 nm LA5-6.jpg Opaque Laser 6 W n/a n/a n/a n/a 6 W, 450 nm
Lasers, 10 μm LI40.jpg Translucent Laser 40 W n/a n/a n/a n/a 40 W, 10 μm
ST1 ST1.png Waxes, Plastics
LIGHT Drilling
Spindle Tool n/a 12VDC, 4A, 40W n/a n/a n/a 5,000 (with no load)
ST3 ST3.jpg Plastics, Brass
LIGHT Machining
Spindle Tool n/a 48VDC, 8.3A, 400W n/a n/a n/a 12,000 (with no load)

Note, for crosslinking heads, just see the standard heads and add the UV LED mechanism.

For details about Filament-based print heads, please visit our Filament_Heads page.

For details about Reservoir-based print heads, please visit our Reservoir_Heads page.

Nordson and ViscoTec Heads

caption

Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.

Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.

Click image for a larger image.