Difference between revisions of "Head Overview"

From Hyrel3D
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 30: Line 30:
| n/a
| n/a
| n/a
| n/a
| Up to 250°C
| Up to 250°C<br><br>limited use<br>up to 265°C
| n/a
| n/a
| For Standard Material
| For Standard Material
Line 41: Line 41:
| n/a
| n/a
| n/a
| n/a
| 300 to 450°C
| 270 to 450°C
| n/a
| n/a
| For High-Temp Material
| For High-Temp Material
Line 63: Line 63:
| n/a
| n/a
| n/a
| n/a
| Up to 250°C
| Up to 250°C<br><br>limited use<br>up to 265°C
| n/a
| n/a
| For Standard Material
| For Standard Material
Line 85: Line 85:
| n/a
| n/a
| n/a
| n/a
| Up to 250°C
| Up to 250°C<br><br>limited use<br>up to 265°C
| n/a
| n/a
| For Standard Material
| For Standard Material
Line 199: Line 199:
| Disposable Reservoirs<br>Normal Torque<br>1:1, 2:1, 3:1 Blend Ratios
| Disposable Reservoirs<br>Normal Torque<br>1:1, 2:1, 3:1 Blend Ratios
|-
|-
! DSD-50XHT
! DSD-50HT
| [[File:DSD-50HT.png|50px]]
| [[File:DSD-50HT.png|50px]]
| Two-part Mixtures
| Two-part Mixtures

Latest revision as of 12:27, 6 September 2021

Hyrel 3D Printers offer a variety of modular print heads, which are compared below.

Modular Heads Comparison

The following chart compares and contrasts the various extrusion heads:

Extrusion Heads Comparison
Designation Image Material Viscosity Power Volume Reservoir Temperature UV LEDs? Other
MK1-250 MK1-250.png 1.75mm Filament Standard NEMA 11
1:1
n/a n/a Up to 250°C

limited use
up to 265°C
n/a For Standard Material
MK1-450
DISCONTINUED
MK1-450.png 1.75mm Filament Exotic NEMA 11
1:1
n/a n/a 270 to 450°C n/a For High-Temp Material
MK2-250 MK2-250.png 1.75mm Filament Flexible NEMA 11
1:1
n/a n/a Up to 250°C n/a For Flexible Material
HT1-250 HT.jpg 1.75mm Filament Standard NEMA 17
5.18:1
Higher Torque Available
n/a n/a Up to 250°C

limited use
up to 265°C
n/a For Standard Material
HT1-450 HT.jpg 1.75mm Filament Exotic NEMA 17
5.18:1
Higher Torque Available
n/a n/a 300 to 450°C n/a For High-Temp Material
HT3-250 HT.jpg 2.85mm Filament Standard NEMA 17
14:1
Higher Torque Available
n/a n/a Up to 250°C

limited use
up to 265°C
n/a For Standard Material
HT3-450 HT.jpg 2.85mm Filament Exotic NEMA 17
14:1
Higher Torque Available
n/a n/a 300 to 450°C n/a For High-Temp Material
SDS-1 SDS1.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
1cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-05 SDS5.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
05cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-10 SDS10.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
10cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-30 SDS30.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene Ambient Optional Disposable Reservoir
Normal Torque
SDS-30XT SDS30XT.jpg Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
30cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
SDS-60 SDS60.png Liquid, Gel Up to 100,000 cP NEMA 11
3:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Normal Torque
SDS-60XT 50px Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
SDS-150XT 50px Liquid, Gel Up to 300,000 cP NEMA 17
25.9:1
60cc Polypropylene Ambient Optional
~50 mW
Disposable Reservoir
Extra Torque
DSD-50 50px Two-part Mixtures Up to 100,000 cP NEMA 11
1:1
25cc each part Polypropylene Ambient Optional
~50 mW
Disposable Reservoirs
Normal Torque
1:1, 2:1, 3:1 Blend Ratios
DSD-50HT 50px Two-part Mixtures Up to 300,000 cP NEMA 17
25.9:1
25cc each part Polypropylene Ambient Optional
~50 mW
Disposable Reservoirs
Normal Torque
1:1, 2:1, 3:1 Blend Ratios
SMH-2 SMH2.jpg Two-part Mixtures Up to 100,000 cP Depends on feeding heads Depends on feeding heads Depends on feeding heads Ambient Optional
~50 mW
*Fed by other heads
Variable Blend Ratios
DMH-2 50px Two-part Mixtures Depends on feeding heads Depends on feeding heads Depends on feeding heads Depends on feeding heads Ambient Optional
~50 mW
*Fed by other heads
Variable Blend Ratios
HSD-10-Ardes HSD10 syringe.jpg Liquid, Gel Up to 100,000 cP NEMA 11
1:1
10cc Polyamide Up to 75°C Optional
~50 mW
n/a
HSD-30-BD HSD30.jpg Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene Up to 50°C Optional
~50 mW
Disposable Reservoir
Normal Torque
RSD-30-BD RSD-30.jpg Liquid, Gel Up to 100,000 cP NEMA 11
3:1
30cc Polypropylene -5°C to 80°C Optional
~50 mW
Disposable Reservoir
Normal Torque
EMO EMO-25.png Liquid, Gel, Paste Up to 300,000 cP NEMA 11
19:1, 27:1
25cc Aluminum Ambient Optional
~50 mW
Reusable Reservoir
Normal Torque
EMO-XT
eXtra Torque
50px Liquid, Gel, Paste, Clay Up to 1,000,000 cP NEMA 11
100:1
15cc Stainless Ambient Optional
~50 mW
Reusable Reservoir
High Torque
EMO-ST
Super Torque
50px Liquid, Gel, Paste, Clay Up to 2,000,000 cP NEMA 17
25.9:1
15cc Stainless Ambient Optional
~50 mW
Reusable Reservoir
High Torque
EMO-300XT
eXtra Torque
50px Liquid, Gel, Paste, Clay Up to 1,000,000 cP NEMA 11
100:1
300cc Stainless Ambient Optional
~50 mW
Reusable Reservoir
High Torque
VOL VOL-25.png Liquid, Gel, Paste Up to 300,000 cP NEMA 11
51:1
25cc Aluminum Up to 90°C Optional
~50 mW
Reusable Reservoir
Normal Torque
KR2 KR2.jpg Paste, Clay, Hot Glue Up to 1,000,000 cP NEMA 11
100:1
15cc Stainless Up to 180°C Optional
~50 mW
Reusable Reservoir
High Torque
KR2-ST
Super Torque
KR2.jpg Paste, Clay, Hot Glue Up to 2,000,000 cP NEMA 17
25.9:1
15cc Stainless Up to 180°C Optional
~50 mW
Reusable Reservoir
High Torque
TAM TAM.jpg Paste, Clay, Hot Glue Up to 1,000,000 cP NEMA 11
100:1
15cc Stainless Up to 270°C Optional
~50 mW
Reusable Reservoir
High Torque
UVP-365 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 365nm Focusable
UVP-405 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 405nm Focusable
UVP-450 nm UVP.jpg Photoinitiators n/a ~10 W n/a n/a n/a 450nm Focusable
LA5-808 LA5-6.jpg Dark, Opaque Laser 5 W n/a n/a n/a n/a 5 W, 808 nm, 0.25 mm ⌀
LA6-450 LA5-6.jpg Opaque Laser 6 W n/a n/a n/a n/a 6 W, 450 nm, 0.25 mm ⌀
LI40 LI40.jpg Translucent Laser 40 W n/a n/a n/a n/a 40 W, 10 μm, 0.40 mm ⌀
ST1 ST1.png Waxes, Plastics
LIGHT Drilling
Spindle Tool n/a 12VDC, 4A, 40W n/a n/a n/a 5,000 (with no load)
ST3 ST3.jpg Plastics, Brass
LIGHT Machining
Spindle Tool n/a 48VDC, 8.3A, 400W n/a n/a n/a 12,000 (with no load)

Note, for crosslinking heads, just see the standard heads and add the UV LED mechanism.

For details about Filament-based print heads, please visit our Filament_Heads page.

For details about Reservoir-based print heads, please visit our Reservoir_Heads page.

Nordson and ViscoTec Heads

caption

Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.

Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.

Click image for a larger image.