Difference between revisions of "Hydra 16A"

From Hyrel3D
Jump to navigation Jump to search
Line 5: Line 5:
|}
|}


The Hydra 16A is our large format machine. Introduced in 2016, it features hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 5 microns in the X and Y. It comes standard with one yoke with five tool positions, but can take additional yokes to handle more.
The Hydra 16A is our large format machine.  


[[File:Hydra_16A.png|600px]]
== History ==


The base model has a range of 250mm in the Z, and can be equipped with the following (one is required):
* The Hydra 16A was introduced in 2015.


* Bed, Standard, Warm: 400x300mm, 120C
[[File:Hydra_16A.png|600px]]
* Bed, Standard, Hot: 400x300mm, 200C
* Bed, Large, Warm: 600x400mm, 120C
* Bed, Large, Hot: 600x444mm, 200C
 
In addition to the options available on most Hyrel printers, the Hydra 16A can also be equipped with:
 
* The 40 Watt CO2 laser (~10,000nm wavelength)
* The Pick-and-Place head with component tray
* The Three-Phase Spindle Tool for light machining operations


Most technical specifications are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
== Technical Data ==


=== Adjustments ===   
Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the '''[[Printer Overview]]''' page.
* Speed of travel (at slicing or in g-code editor)
* Layer thickness (at slicing)
* Volume of flow per unit distance (at slicing, in g-code editor, or manually during build)
* Extruder temperature (at slicing, in g-code editor, or manually during build) (all heads)
* Cooling Fan speed (at slicing, in g-code editor, or manually during build (filament and chilled reservoir heads)
* HotBed Temperature (at slicing, in g-code editor, or manually during build)


''Or, is tabular better?''
== Adjustments ==   


{| border="1" class="wikitable"
{| border="1" class="wikitable"
Line 49: Line 34:
|-
|-
! Flow Rate
! Flow Rate
| μL/sec || yes || yes || yes
| nL/sec || yes || yes || yes
|-
|-
! Extruder Temperature
! Extruder Temperature

Revision as of 17:11, 29 January 2021

The Hydra 16A is our large format machine.

History

  • The Hydra 16A was introduced in 2015.

Hydra 16A.png

Technical Data

Technical specifications and accessory compatibility for printers currently shipping are detailed in the comparison chart on the Printer Overview page.

Adjustments

Adjustments
Metric Units During Slicing In G-Code Editor GUI During Build
Speed of Travel mm/min yes yes no
Layer Thickness mm yes no no
Flow Rate nL/sec yes yes yes
Extruder Temperature °C yes yes yes
Fan Speed % of max yes yes yes
HotBed °C yes yes yes

Controls

Here is an explanation of the electronics of the 16A; click any image to enlarge:

Main Panel

The Main Panel has the Power Supplies, Controllers, Encoders, and Relays.

16A MAIN 2021 s.jpg

  • The Left Side:
    • The ATX Power Supply provides 3.3, 5, and 12 VDC power to the processor, lights, and most heads loaded on the yoke.
    • The 24 VDC Power Supply provides 24 VDC power to the motion motors - X, Y, Z, A, and B.
    • The 48 VDC Power Supply provides 48 VDC power to the 3-phase spindle tool.
  • The Center:
    • The X Axis Encoder controls motion and monitors for errors in this axis.
    • The Y Axis Encoder controls motion and monitors for errors in this axis.
    • The Z Axis Encoder controls motion and monitors for errors in this axis.
    • The optional CO2 Laser Driver controls the CO2 Laser.
    • The optional 3-Phase Spindle Driver controls the 3-Phase Spindle Tool.
    • The optional A Axis Encoder controls motion and monitors for errors in this axis.
    • The optional B Axis Encoder controls motion and monitors for errors in this axis.
  • The Right Side:
    • The Hotbed Controller controls the heated or chilled build platform and the emergency stop.
    • The Relays control power to:
      • The Hotbed (or Coldbed)
      • The Emergency Stop
      • The Chamber Heater
      • (spare)
      • (spare)

Front Panel

The Front Panel has the Tablet Interface Board (with STM429 Motion Controller) and External Ports.

16A TIB 2021 L.jpg