Difference between revisions of "Hydra 16A"

From Hyrel3D
Jump to navigation Jump to search
(Created page with "Category:Hardware Category:Printers {| align="right" | __TOC__ |} The Model 16A is our large format machine for 2016, featuring hard resolution (with encoder feedback...")
 
Line 17: Line 17:
* Upgrade to 600mm x 400mm x 300mm (X/Y/Z) build volume - Big X/Y/Z.
* Upgrade to 600mm x 400mm x 300mm (X/Y/Z) build volume - Big X/Y/Z.
* Add a CO2 laser - specify 40w or 80w.
* Add a CO2 laser - specify 40w or 80w.
The Model 16A accepts all modular print heads made to date.

Revision as of 12:48, 19 July 2016

The Model 16A is our large format machine for 2016, featuring hard resolution (with encoder feedback) of 20 microns in the X and Y, and 0.8 microns in the Z in standard mode. In microstepping mode, we can achieve soft resolution of 4 microns in the X and Y. It comes standard with two tool positions, but can take additional yokes to handle more.


The base model has a 400mm x 300mm x 300mm (X/Y/Z) build volume.


In addition to our Hyrel interchangeable heads and accessories, the following configurations may be ordered:

  • Upgrade to 600mm x 400mm x 300mm (X/Y/Z) build volume - Big X/Y.
  • Upgrade to 400mm x 300mm x 300mm (X/Y/Z) build volume - Big Z.
  • Upgrade to 600mm x 400mm x 300mm (X/Y/Z) build volume - Big X/Y/Z.
  • Add a CO2 laser - specify 40w or 80w.


The Model 16A accepts all modular print heads made to date.