Difference between revisions of "Lasers"

From Hyrel3D
Jump to navigation Jump to search
 
(22 intermediate revisions by the same user not shown)
Line 12: Line 12:
== CO<sub>2</sub> Lasers ==
== CO<sub>2</sub> Lasers ==


Hyrel offers 40w and 80w CO<sub>2</sub> lasers on some of our Hydra models.
[[File:LI40.jpg]]
 
Hyrel offers a 40w CO<sub>2</sub> laser on some of our Hydra models.
 
We recommend at least 500 cfm (850 m<sup>3</sup>/h) of exhaust while lasering.


=== Hyrel Specific ===
=== Hyrel Specific ===


==== Settings ====
Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".<br>
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".
Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.
==== Videos ====
*'''[https://www.youtube.com/watch?v=qBBxkx40H8s CO2 Laser Alignment]'''
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]
*[https://youtu.be/kqnjlTSg-20 CO2 Laser Marking with the Hydra]
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]
*[https://youtu.be/FnYDoNkgOrI Converting a Hydra from Printer to Laser]
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]
*[https://youtu.be/fHqTlcdISIg Cutting Nylon Mesh with CO2 Laser on a Hydra]
*[https://youtu.be/4Y9V6RWhKj4 Cutting acrylic with the CO2 Laser on a Hydrda]
*[https://youtu.be/4Y9V6RWhKj4 Cutting Acrylic with the CO2 Laser on a Hydrda]
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]
*[https://www.youtube.com/watch?v=WNr59eCGuK4 Changing the Address Resistor on the Hydra CO2 Laser]
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]
*[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel Hydra CO2 Laser Alignment]
Line 28: Line 42:
=== Laser Alignment ===
=== Laser Alignment ===


Hyrel-specific Laser alignment: [https://www.youtube.com/watch?v=qBBxkx40H8s]
[https://www.youtube.com/watch?v=qBBxkx40H8s Hyrel CO2 Laser Alignment Video.]


Below are great videos about laser alignment in very similar setups:
Below are great videos about laser alignment in very similar setups:
Line 35: Line 49:
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]
#[https://www.youtube.com/watch?v=pw8Ro2vEEzY ThunderLaser]
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]
#[https://www.youtube.com/watch?v=wY5D27TQwZI BossLaser]
#[https://www.youtube.com/watch?v=T9p-1AZKCVg MakeTech]


=== Informational Videos ===
=== Informational Videos ===
Line 48: Line 63:
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]
#[https://www.youtube.com/watch?v=GNV0JUJXdvk Modifications and Recommendations from a Year of Use]


== Diode Lasers ==


== Diode Lasers ==
[[File:LA5-6.jpg]]


While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.
While less powerful than CO<sub>2</sub> lasers, diode lasers are still dangerous, and the same safety precautions apply.


Hyrel offers diode lasers in two configurations:
{| border="1" class="wikitable" style="width: 60%; text-align: center;"
|+ Diode Laser Properties
|-
! style="width: 30%;" | Property
! style="width: 30%;" | LA5-808
! style="width: 30%;" | LA6-450
|-
! Watts
| ~5
| ~6
|-
! Wavelength
| 808
| 450
|-
! Columnated
| FAC
| No
|-
! Focused
| Yes
| Yes
|-
! Dot Size
| 200-800 µm
| 200-500 µm
|-
! Pulsable
| to 2 kHz
| to 2 kHz
|-
|}
 
Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.
 
Hyrel offers diode lasers in several configurations:


* The LA6-450, a 6 watt, 450 nanometer laser. [https://www.youtube.com/watch?v=OceUiuTixPA LA6-450 Intro Video]
* The LA5-808, a 5 watt, 808 nanometer laser. [https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808 Intro Video]
* The LA3-450, a 3 watt, 450 nanometer laser.
More videos about the diode lasers:
*[https://www.youtube.com/watch?v=C5-NYk06NVc Laser Marking on a Cylinder]
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]
*[https://www.youtube.com/watch?v=Tz6mRSkOaSk LA6-450 and LA5-808 Laser Overview]
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]
*[https://www.youtube.com/watch?v=OceUiuTixPA LA6-450: 6w, 450nm Diode Laser Head Intro]
 
*[https://www.youtube.com/watch?v=0lpa4nENtyQ LA5-808: 5w, 808nm Diode Laser Head Intro]
Manuals are available on the '''[[Manuals]]''' page, or in Repetrel under HELP > Accessory Manuals
*[https://www.youtube.com/watch?v=YRsyEGHyt3k DXF to Laser Gcode Generation]

Latest revision as of 17:08, 13 April 2021

Lasers: Exciting!

Also, dangerous.

Only safety-conscious adults with proper safeguards should operate lasers of any kind.

CO2 Lasers

LI40.jpg

Hyrel offers a 40w CO2 laser on some of our Hydra models.

We recommend at least 500 cfm (850 m3/h) of exhaust while lasering.

Hyrel Specific

Settings

Your acutal laser controller, on the Aux Heads tab, should be set to "Laser_40".
Your safety/mirror/lens controller, on the Heads 1-5 tab, should be set to "CO2_Laser" or the newer "CO2_Lens".

Z-zero should be set 8 mm from the bottom of the focusing lens hardware for the CO2 laser.

Videos

Laser Alignment

Hyrel CO2 Laser Alignment Video.

Below are great videos about laser alignment in very similar setups:

  1. RDWorks
  2. ThunderLaser
  3. BossLaser
  4. MakeTech

Informational Videos

Below are links to some VERY helpful videos from a gentleman named Russ, who purchased a laser engraver very similar to ours. In these videos, he shares his experiences, advice, and safety tips. While some of what Russ explains does not apply to using lasers on Hyrel equipment, much of it does. Please watch all these videos, even if you don't feel you need the information. Safety first!

  1. Introduction to Laser Cutting
  2. Laser Theory and Safety Issues
  3. Software (n/a for Hyrel users)
  4. Initial Setup and Powerup
  5. Test Prints
  6. Focal Distance and Power Analysis
  7. Modifications and Recommendations from a Year of Use

Diode Lasers

LA5-6.jpg

While less powerful than CO2 lasers, diode lasers are still dangerous, and the same safety precautions apply.

Diode Laser Properties
Property LA5-808 LA6-450
Watts ~5 ~6
Wavelength 808 450
Columnated FAC No
Focused Yes Yes
Dot Size 200-800 µm 200-500 µm
Pulsable to 2 kHz to 2 kHz

Z-zero should be set 18 mm from the bottom of the focusing lens hardware for the Diode lasers.

Hyrel offers diode lasers in several configurations:

More videos about the diode lasers:

Manuals are available on the Manuals page, or in Repetrel under HELP > Accessory Manuals