Difference between revisions of "Main Page"

From Hyrel3D
Jump to navigation Jump to search
Line 2: Line 2:
| __TOC__
| __TOC__
|}
|}
Welcome to the Hyrel Wiki.


==Printers==
==Printers==
Line 45: Line 47:
|+ Cold Flow Head Properties
|+ Cold Flow Head Properties
! style="width: 15%;" | Head
! style="width: 15%;" | Head
! style="width: 15%;" | Max Temp
! style="width: 15%;" | Container
! style="width: 15%;" | Container
! style="width: 15%;" | Capacity
! style="width: 15%;" | Capacity
Line 52: Line 53:
|-
|-
! [[EMO-25]]
! [[EMO-25]]
| Ambient
| Aluminum
| Aluminum
| 25cc
| 25cc
Line 59: Line 59:
|-
|-
! [[COD-25]]
! [[COD-25]]
| Ambient
| Aluminum
| Aluminum
| 25cc
| 25cc
Line 66: Line 65:
|-
|-
! [[SDS-5]]  
! [[SDS-5]]  
| Ambient
| Syringe
| Syringe
| 05cc
| 05cc
Line 73: Line 71:
|-
|-
! [[CSD-5]]  
! [[CSD-5]]  
| Ambient
| Syringe
| Syringe
| 05cc
| 05cc
Line 80: Line 77:
|-
|-
! [[SDS-10]]  
! [[SDS-10]]  
| Ambient
| Syringe
| Syringe
| 10cc
| 10cc
Line 87: Line 83:
|-
|-
! [[CSD-10]]  
! [[CSD-10]]  
| Ambient
| Syringe
| Syringe
| 10cc
| 10cc
Line 94: Line 89:
|-
|-
! [[SDS-30]]  
! [[SDS-30]]  
| Ambient
| Syringe
| Syringe
| 30cc
| 30cc
Line 101: Line 95:
|-
|-
! [[CSD-30]]  
! [[CSD-30]]  
| Ambient
| Syringe
| Syringe
| 30cc
| 30cc
Line 108: Line 101:
|-
|-
! [[SDS-60]]  
! [[SDS-60]]  
| Ambient
| Syringe
| Syringe
| 60cc
| 60cc
Line 115: Line 107:
|-
|-
! [[CSD-60]]  
! [[CSD-60]]  
| Ambient
| Syringe
| Syringe
| 60cc
| 60cc
Line 128: Line 119:
Warm Flow means fluid (non-filament-based) materials which are deposited at up to 100°C, with or without UV Crosslinking.
Warm Flow means fluid (non-filament-based) materials which are deposited at up to 100°C, with or without UV Crosslinking.


====Materials====
====Materials, Warm Flow====


<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
*[[Adhesives]]
*[[Adhesives]]
*[[Fimo]]
*[[Fimo]]
Line 138: Line 130:
*[[Sculpey]]
*[[Sculpey]]
*[[Wax]]
*[[Wax]]
</div>


Note that some materials (like Fimo, Plasticine and Sculpey) flow more freely when slightly above room temperature, and perhaps too freely at higher temperatures.
Note that some materials (like Fimo, Plasticine and Sculpey) flow more freely when slightly above room temperature, and perhaps too freely at higher temperatures.


====Heads====
====Heads, Warm Flow====
 
{| border="1" class="wikitable sortable" style="width: 85%;"
|+ Cold Flow Head Properties
! style="width: 15%;" | Head
! style="width: 15%;" | Max Temp
! style="width: 15%;" | Container
! style="width: 15%;" | Capacity
! style="width: 15%;" | Nozzle
! style="width: 15%;" | UV Crosslinking
|-
! [[VOL-25]]
| 100°C
| Aluminum
| 25cc
| 1.5mm, 2.0mm, Luer
| No
|-
! [[VCD-25]]
| 100°C
| Aluminum
| 25cc
| Luer
| Yes
|-
! [[KRA-15]]
| 150°C
| Stainless
| 15cc
| 1.5mm, 2mm, Luer
| No
|-
! [[KCD-15]]
| 150°C
| Stainless
| 15cc
| Luer
| Yes
|-
|}


*The [[VOL-25]] prints in Warm Flow materials at up to 100°C, with the supplied nozzles or commonly available needles with our [[Luer Tip Adapter]].
*The [[VCD-25]] prints in Warm Flow materials at up to 100°C with [[LED Crosslinking]], with our [[Luer Tip Adapter]].
*The [[KRA-15]] prints in Warm Flow materials at up to 150°C, with the supplied nozzles or commonly available needles with our [[Luer Tip Adapter]].
*The [[KCD-15]] prints in Warm Flow materials at up to 150°C with [[LED Crosslinking]], with our [[Luer Tip Adapter]].


===Hot Flow===
===Hot Flow===


Hot Flow means (1.75mm diameter) filament-based materials which are deposited at up to 250°C, with
Hot Flow means 1.75mm diameter, filament-based materials which are deposited at up to 250°C, with
 
====Materials, Hot Flow====
 
<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
*[[ABS]]
*[[BendLay]]
*[[FilaFlex]]
*[[Flex45]]
*[[LayBrick]]
*[[LayWood]]
*[[NinjaFlex]]
*[[Nylon]]
*[[PC]]
*[[PEEK]]
*[[PET]]
*[[PETG]]
*[[PETT]]
*[[PLA]]
*[[PlastInk Rubber]]
*[[PP]]
*[[PVA]]
*[[T-Glase]]
</div>
 
====Heads, Hot Flow====
 
{| border="1" class="wikitable sortable" style="width: 85%;"
|+ Cold Flow Head Properties
! style="width: 15%;" | Head
! style="width: 15%;" | Min Temp
! style="width: 15%;" | Max Temp
! style="width: 15%;" | Filament Type
! style="width: 15%;" | Nozzle
|-
! [[MK1-250]]
| 150°C
| 250°C
| Standard
| .35mm, .50mm, .75mm, 1.0mm
|-
! [[MK2-250]]
| 150°C
| 250°C
| Flexible
| .35mm, .50mm, .75mm, 1.0mm
|-
! [[MK1-450]]
| 250°C
| 450°C
| Engineering
| .50mm
|-
|}

Revision as of 15:31, 28 January 2016

Welcome to the Hyrel Wiki.

Printers

As of Jan, 2016, Hyrel Printers are available in two models: Engines and Systems.

  • Engines are open-air models. Detailed information is on the Engines page.
  • Systems are enclosed models. Detailed information is on the Systems page.

Filaments, Heads and Flow

We break down our deposition methods based on temperature, as follows:

Cold Flow

Cold Flow means fluid (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.

Materials, Cold Flow

Heads, Cold Flow

Cold Flow Head Properties
Head Container Capacity Nozzle UV Crosslinking
EMO-25 Aluminum 25cc 1.5mm, 2.0mm, Luer No
COD-25 Aluminum 25cc Luer Yes
SDS-5 Syringe 05cc Luer No
CSD-5 Syringe 05cc Luer Yes
SDS-10 Syringe 10cc Luer No
CSD-10 Syringe 10cc Luer Yes
SDS-30 Syringe 30cc Luer No
CSD-30 Syringe 30cc Luer Yes
SDS-60 Syringe 60cc Luer No
CSD-60 Syringe 60cc Luer Yes


Warm Flow

Warm Flow means fluid (non-filament-based) materials which are deposited at up to 100°C, with or without UV Crosslinking.

Materials, Warm Flow

Note that some materials (like Fimo, Plasticine and Sculpey) flow more freely when slightly above room temperature, and perhaps too freely at higher temperatures.

Heads, Warm Flow

Cold Flow Head Properties
Head Max Temp Container Capacity Nozzle UV Crosslinking
VOL-25 100°C Aluminum 25cc 1.5mm, 2.0mm, Luer No
VCD-25 100°C Aluminum 25cc Luer Yes
KRA-15 150°C Stainless 15cc 1.5mm, 2mm, Luer No
KCD-15 150°C Stainless 15cc Luer Yes


Hot Flow

Hot Flow means 1.75mm diameter, filament-based materials which are deposited at up to 250°C, with

Materials, Hot Flow

Heads, Hot Flow

Cold Flow Head Properties
Head Min Temp Max Temp Filament Type Nozzle
MK1-250 150°C 250°C Standard .35mm, .50mm, .75mm, 1.0mm
MK2-250 150°C 250°C Flexible .35mm, .50mm, .75mm, 1.0mm
MK1-450 250°C 450°C Engineering .50mm