Difference between revisions of "Main Page"

From Hyrel3D
Jump to navigation Jump to search
 
(272 intermediate revisions by 3 users not shown)
Line 3: Line 3:
|}
|}


=Welcome to Hyrel!=
== '''New Users Start Here - Learn about our Equipment''' ==


With literally thousands of materials to print on the Hyrel Printer, we have broken down the list of materials into logical groups based on their printing temperature and type of head used to print them.
At Hyrel, we do things differently. Please get a feel for how Hyrel equipment works with this pdf and with these videos:


If you are planning on using the heads which photoinitiate crosslinking, make sure you specify the correct wavelength of LED for your material.
# '''PDF:''' [http://hyrel3d.net/instructions/t1/HYREL%203D%20-%20T1%20Training%20Session.pdf First Training Session]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=mVyCq7CPGLg Session 1A: Hardware and Software Overview Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=2tIHw_JIQAI Session 1B: Communications and Tramming Video]
# [[File:Yt.png]] [https://www.youtube.com/watch?v=lFATCfKJf4I Session 1C: Setting Z-Zero and Emulsifiable Print Video]


A standard material printing data sheet has been created for materials that have been internally tested; you can access this data by clicking on the material name below.  
For more detailed instructions, please continue from '''[http://hyrel3d.net/wiki/index.php/Instructions#Additional_Emulsifiable_Videos this point on the Instrucions page].'''


Always be sure of what material you are using, and what will be off-gassed.
== '''Experienced Users Start Here - Compare our Models''' ==


=Printers=
Once you have an idea of how we do things, you should learn more about our different models of printer and our wide array of filament heads, emulsion/paste/liquid heads, laser options, spindle tools, and more.


As of Jan, 2016, Hyrel Printers are available in two models: [[Engines]] and [[Systems]].
1. Compare our various models with '''[http://hyrel3d.net/wiki/index.php/Overview#Comparison this chart]'''.


==Engines and Systems==
2. Compare our various accessories with '''[http://hyrel3d.net/wiki/index.php/Overview#Comparison_2 this chart]'''.


[[Engines]] are open-air models. Detailed information is on the [[Engines]] page. [[Systems]] are enclosed models. Detailed information is on the [[Systems]] page. Both models feature over 200x200x200mm of build volume. Each model can take up to four of our modular heads detailed below. Build plates will get to between 70°C and 85°C, depending on ambient temperature.


==The Next Big Thing==
== '''Skeptical Users Start Here - Download and Try our Software for FREE''' ==


Information not yet available. :)
Our '''[[Repetrel]]''' Software controls all versions of our printers, as well as our in-house CNC machines and other side projects. Most of the features are explained on our '''[[Repetrel]]''' page.


=Cold Flow=
To try it for yourself (limited without a Hyrel printer attached), just:


Cold Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.
1. Install '''[http://www.hyrel3d.net/downloads/updater/EcosystemApps.exe EcoSystems Apps].'''


==Materials, Cold Flow==
2. Install '''[http://hyrel3d.net/downloads/repetrel/repetrel_3.083_K_dfu_3.083e.rar Repetrel].'''


The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.
Full install instructions are at our '''[[New Install]]''' page.


<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
*[[3P Quick Cure Clay]]
*[[Adhesives]]
*[[Clay]], Generic
*[[Epoxy]], Two-part
*[[Fimo]]
*[[Glue]]
*[[Kato]]
*[[Metal Clay]], including Precious Metal Clay (PMC)
*[[Modeling Clay]]
*[[PEG]] PolyEthylene Glycol
*[[Porcelain]]
*[[Plasticine]]
*[[Play-Doh]]
*[[Resins]]
*[[RTV Silicone]]
*[[Sculpey]]
*[[Sugru]]
</div>


==Heads, Cold Flow==
== '''DIY Users Start Here - Look at our Resources''' ==


The following table compares the properties of the various Cold Flow heads:
1. '''[[Repetrel]]''' Overview


{| border="1" class="wikitable sortable" style="width: 85%;"
2. List of all '''[[Videos]]'''
|+ Cold Flow Head Properties
! style="width: 15%;" | Head
! style="width: 15%;" | Container
! style="width: 15%;" | Capacity
! style="width: 15%;" | Nozzle
! style="width: 15%;" | UV Crosslinking
|-
! [[EMO-25]]
| Aluminum
| 25cc
| 1.5mm, 2.0mm, Luer
| No
|-
! [[COD-25]]
| Aluminum
| 25cc
| Luer
| Yes
|-
! [[SDS-5]]
| Syringe
| 05cc
| Luer
| No
|-
! [[CSD-5]]
| Syringe
| 05cc
| Luer
| Yes
|-
! [[SDS-10]]
| Syringe
| 10cc
| Luer
| No
|-
! [[CSD-10]]
| Syringe
| 10cc
| Luer
| Yes
|-
! [[SDS-30]]
| Syringe
| 30cc
| Luer
| No
|-
! [[CSD-30]]
| Syringe
| 30cc
| Luer
| Yes
|-
! [[SDS-60]]
| Syringe
| 60cc
| Luer
| No
|-
! [[CSD-60]]  
| Syringe
| 60cc
| Luer
| Yes
|-
|}


==Research Papers Citing Hyrel Cold Flow==
3. '''[[Gcode]]''' Explained
*[http://hyrel3d.net/papers/Hydrogels_for_Bone_Tissue_Engineering.pdf Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]


=Warm Flow=
4. Use links on the sidebar


Warm Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at up to 150°C, with or without UV Crosslinking, depending on the head.


PCL and other medium temperature material can be printed directly from Pellets the size of small peas. If you pulverize or powder your polymer, it is possible to pre-mix the material dry and test different alloys of plastics.
== '''Inquiring Users Start Here - Contact Us''' ==


==Materials, Warm Flow==
Email: '''service@ams-india.co.in'''


The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.
Phone: '''+91 80 28377270'''


<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
Address: 108 E, First Floor, SRS Road, III Phase,
*[[Adhesives]]
Peenya Industrial Area,
*[[Fimo]]
Bangalore 560058.
*[[Kato]]
*[[Glue]]
*[[PCL]]
*[[Plasticine]]
*[[Resins]]
*[[Sculpey]]
*[[Wax]]
</div>


==Heads, Warm Flow==
=== Can we print your material? ===


The following table compares the properties of the various Warm Flow heads:
'''Probably... please tell us:'''


{| border="1" class="wikitable sortable" style="width: 85%;"
# What form it is in at room temperature (powder, granules, filament, gel, etc).
|+ Warm Flow Head Properties
# Do you need the environment or build surface at a certain temperature?
! style="width: 15%;" | Head
# For Filaments:  
! style="width: 15%;" | Max Temp
## At what temperature will it be printed?
! style="width: 15%;" | Container
## Is it 1.75mm +/- 0.1mm?
! style="width: 15%;" | Capacity
# For liquids, gels, granules or powders:
! style="width: 15%;" | Nozzle
## At what temperature will it be deposited?
! style="width: 15%;" | UV Crosslinking
## Is it homogeneous or pre-mixed, or do we need to mix it as we dispense?
|-
### If mixed as dispensed, at static or dynamic ratios?
! [[VOL-25]]
## How does it harden or cure (by cooling, by heating, with humidity, with UV light (specify wavelength))?
| 100°C
## Is it photosensitive? Energetic? Caustic? Any special handling, safety or ventilation requirements?
| Aluminum
## What viscosity is it during deposition?
| 25cc
| 1.5mm, 2.0mm, Luer
| No
|-
! [[VCD-25]]
| 100°C
| Aluminum
| 25cc
| Luer
| Yes
|-
! [[KRA-15]]
| 150°C
| Stainless
| 15cc
| 1.5mm, 2mm, Luer
| No
|-
! [[KCD-15]]
| 150°C
| Stainless
| 15cc
| Luer
| Yes
|-
|}


=Hot Flow=


Hot Flow is our term for filament-based materials which are deposited at up to 450°C, depending on the head. As of January, 2016, our Hot Flow heads are only for 1.75mm filaments.


==Materials, Hot Flow==
We also have partners in France and India, and CE marked units are available.


The following materials can be printed from Hot Flow heads. Note that depending on the characteristics of your material, one head will be a better match than the others. See the "Recommended For" column in the table below.
== A Note about COVID-19, the latest Corona Virus ==


<div style="column-count:5;-moz-column-count:5;-webkit-column-count:5">
We are still building and shipping units, while abiding by safety recommendations.
*[[ABS]], Acrylonitrile Butadiene Styrene
*[[BendLay]]
*[[FilaFlex]]
*[[Flex45]]
*[[LayBrick]]
*[[LayWood]]
*[[NinjaFlex]]
*[[Nylon]]
*[[PC]], PolyCarbonate
*[[PEEK]], PolyEther Ether Ketone
*[[PET]], PolyEthylene Terephthalate
*[[PETG]], PolyEthylene Terephthalate Glycol-modified
*[[PLA]], PolyLactic Acid
*[[PlastInk Rubber]]
*[[PP]], PolyPropylene
*[[PVA]], PolyVinyl Alcohol
*[[T-Glase]]
</div>


==Heads, Hot Flow==


The following table compares the properties of the various Hot Flow heads, including which heads are recommended for which materials:
.
 
{| border="1" class="wikitable sortable" style="width: 85%;"
|+ Hot Flow Head Properties
! style="width: 10%;" | Head
! style="width: 10%;" | Min Temp
! style="width: 10%;" | Max Temp
! style="width: 10%;" | Filament Type
! style="width: 10%;" | Nozzle
! style="width: 20%;" | Recommended For
|-
! [[MK1-250]]
| 150°C
| 250°C
| Standard
| .35mm, .50mm, .75mm, 1.0mm
| ABS, LayBrick, LayWood, Nylon PC, PET, PETG, PETT, PLA, PP, PVA, T-Glase
|-
! [[MK2-250]]
| 150°C
| 250°C
| Flexible
| .35mm, .50mm, .75mm, 1.0mm
| BendLay, FilaFlex, Flex45, NinjaFlex, PlastInk Rubber
|-
! [[MK1-450]]
| 250°C
| 450°C
| Engineering
| .50mm
| PC, PEEK
|-
|}
 
==Research Papers Citing Hyrel Hot Flow==
* [http://hyrel3d.net/papers/Fully_3D-Printed_RF_Structures.pdf Demonstration and Characterization of Fully 3D-printed RF Structures], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
* [http://hyrel3d.net/papers/NinjaFlex_Filament_for_Antenna_Applications.pdf Infill Dependent 3D-Printed Material Based on NinjaFlex Filament for Antenna Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
* [http://hyrel3d.net/papers/Novel_Strain_Sensor_Based_on_3D_Printing.pdf A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
* [http://hyrel3d.net/papers/3D_Printed_Loop_Antenna_for_Wearable_and_IoT_Applications.pdf A Novel 3-D Printed Loop Antenna Using Flexible NinjaFlex Material for Wearable and IoT Applications], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
* [http://hyrel3d.net/papers/RF_Characterization_of...NinjaFlex.pdf RF Characterization of 3D Printed Flexible Materials - NinjaFlex Filaments], [http://www.eumwa.org/en/euma/ The European Microwave Association (EuMA)]
 
=Lasers=
 
Hot-swappable Lasers are available in the following configurations:
 
* The [[LA5-808]] is 5W at 808nm, and due to its wavelength, it is best suited for darker material.
* The [[LA6-450]] is 6W at 450nm, and performs well on opaque material of any color.
 
The Reflectivity and Transparency or Translucency of your material will have a great impact on the effectiveness of the laser. Safety glasses are included with each laser.
 
=Spindle Tools=
 
Intended for light drilling and routing operations (especially circuit board work), the ST1 provides between 500 and 5000 RMP (depending on load) to a 1/8" chuck. Our Repetrel software can process Gerber and DRL files for the Spindle Tool and/or the Lasers.
 
=Other Heads=
 
The following accessories each take up a tool position while performing more passive functions:
 
* The [[Inspector]] microscope provides magnification.
* The [[Quiet Storm]] fan provides additional cooling.
* The [[Digitram]], provided with every printer, is used to level the build surface.
 
=Non-Head Accessories=
 
The following non-head accessories are also available:
 
* The [[Feed Chamber Cooling Fan]] mounts on Hot Flow heads to provide additional cooling to the feed chamber. This is desirable with low temperature filaments like PLA.
* The [[Printer Support Kit]] is included with every printer, and includes a build plate, blue tape, and a variety of handy tools like tweezers, razors, and a spatula.
* The [[SDK | Software Developer's Kit]] provides hardware, software, and the source code for developing your own firmware for your own compatible heads.
* The [[LTK | Luer Tip Kit]] provides an EMO to Luer adapter and a variety of luer lock needles.
* The [[Syringe Kit]] provides syringes in quantity.
* The [[Drill Bit Kit]] provides an assortment of drilling bits and end mills for the Spindle Tool.
* The [[Filament Kit]] provides...

Latest revision as of 08:30, 28 September 2021

New Users Start Here - Learn about our Equipment

At Hyrel, we do things differently. Please get a feel for how Hyrel equipment works with this pdf and with these videos:

  1. PDF: First Training Session
  2. Yt.png Session 1A: Hardware and Software Overview Video
  3. Yt.png Session 1B: Communications and Tramming Video
  4. Yt.png Session 1C: Setting Z-Zero and Emulsifiable Print Video

For more detailed instructions, please continue from this point on the Instrucions page.

Experienced Users Start Here - Compare our Models

Once you have an idea of how we do things, you should learn more about our different models of printer and our wide array of filament heads, emulsion/paste/liquid heads, laser options, spindle tools, and more.

1. Compare our various models with this chart.

2. Compare our various accessories with this chart.


Skeptical Users Start Here - Download and Try our Software for FREE

Our Repetrel Software controls all versions of our printers, as well as our in-house CNC machines and other side projects. Most of the features are explained on our Repetrel page.

To try it for yourself (limited without a Hyrel printer attached), just:

1. Install EcoSystems Apps.

2. Install Repetrel.

Full install instructions are at our New Install page.


DIY Users Start Here - Look at our Resources

1. Repetrel Overview

2. List of all Videos

3. Gcode Explained

4. Use links on the sidebar


Inquiring Users Start Here - Contact Us

Email: service@ams-india.co.in

Phone: +91 80 28377270

Address: 108 E, First Floor, SRS Road, III Phase, Peenya Industrial Area, Bangalore 560058.

Can we print your material?

Probably... please tell us:

  1. What form it is in at room temperature (powder, granules, filament, gel, etc).
  2. Do you need the environment or build surface at a certain temperature?
  3. For Filaments:
    1. At what temperature will it be printed?
    2. Is it 1.75mm +/- 0.1mm?
  4. For liquids, gels, granules or powders:
    1. At what temperature will it be deposited?
    2. Is it homogeneous or pre-mixed, or do we need to mix it as we dispense?
      1. If mixed as dispensed, at static or dynamic ratios?
    3. How does it harden or cure (by cooling, by heating, with humidity, with UV light (specify wavelength))?
    4. Is it photosensitive? Energetic? Caustic? Any special handling, safety or ventilation requirements?
    5. What viscosity is it during deposition?


We also have partners in France and India, and CE marked units are available.

A Note about COVID-19, the latest Corona Virus

We are still building and shipping units, while abiding by safety recommendations.


.