Difference between revisions of "Materials"

From Hyrel3D
Jump to navigation Jump to search
Line 12: Line 12:
! Extruder
! Extruder
! Head (°C)
! Head (°C)
! Fan Speed*
! Fan %*
! HotBed (°C)
! HotBed (°C)
! v2.x mm/sec
! v2.x mm/sec

Revision as of 22:17, 1 February 2018


A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column:

Material Reference Chart
Material Extruder Head (°C) Fan %* HotBed (°C) v2.x mm/sec v3/4.x mm/sec
ABS MK1-250 240/235 10 (=25.5%) 80 2000 4000
PLA MK1-250 185/180 10 (=25.5%) 40 2000 4000
PlastInk Rubber MK1-250 225 10 (=25.5%) 50 2000 4000
NinjaFlex MK1-250 225 10 (=25.5%) 50 2000 4000
Nylon MK1-250 225 10 (=25.5%) 80 2000 4000
T-Glase MK1-250 225 10 (=25.5%) 80 2000 4000
BendLay MK1-250 225 10 (=25.5%) 50 500 500
LayBrick MK1-250 225 10 (=25.5%) 80 500 500
LayWoo-d3 MK1-250 220/205 10 (=25.5%) 80 2000 4000
PET MK1-250 210 10 (=25.5%) 40 500 500
PVA MK1-250 210 10 (=25.5%) 40 500 500
Clay EMO-25 n/a n/a n/a 2000 4000
Metal Clay,
Precious Metal Clay
EMO-25 n/a n/a n/a 2000 4000
Polypropylene MK1-250 235 10 (=25.5%) 80 2000 4000
Polycarbonate MK1-350 350 10 (=25.5%) 80 2000 4000
Porcelain EMO-25 n/a n/a n/a 2000 4000
Plasticine EMO-25 n/a n/a n/a 2000 4000
Play-Doh EMO-25 n/a n/a n/a 2000 4000
Sculpey EMO-25 n/a n/a n/a 2000 4000
Sugru EMO-25 n/a n/a n/a 2000 4000
RTV Silicone EMO-25 n/a n/a n/a 2000 4000
  • Note: Be sure the fan directs air to the material and not directly at the nozzle.
  • Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.