Difference between revisions of "Materials"

From Hyrel3D
Jump to navigation Jump to search
Line 6: Line 6:


The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below).
The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below).
Note: we've had GREAT SUCCESS and are very impressed with the GeckoTek EZ-Stik build plates, and now recommend them for most thermoplastics (printing at under 350C; they stick TOO well to PEEK and Ultem):


{| border="1" class="wikitable sortable"
{| border="1" class="wikitable sortable"
Line 14: Line 16:
! Fan %*
! Fan %*
! HotBed (°C)
! HotBed (°C)
! Surface
! ESR,30M <br> mm/min
! ESR,30M <br> mm/min
! Hydra <br> mm/min
! Hydra <br> mm/min
|-
|-
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS]
! [http://en.wikipedia.org/wiki/Acrylonitrile_butadiene_styrene ABS]
| [[MK1-250]] || 240/235 || 10 (25) || 80 || 2000 || 4000
| [[MK1-250]] || 240/235 || 10 (25) || 110 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000
|-
|-
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA]
! [http://en.wikipedia.org/wiki/Polylactic_acid PLA]
| [[MK1-250]] || 185/180 || 10 (25) || 40 || 2000 || 4000
| [[MK1-250]] || 185/180 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000
|-
|-
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber]
! [http://www.plastink.com/en/product-category/rubber-o-175-mm-500-g/ PlastInk Rubber]
| [[MK1-250]] || 225 || 10 (25) || 50 || 2000 || 4000
| [[MK1-250]] || 225 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000
|-
|-
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex]
! [http://www.ninjaflex3d.com/products/ninjaflex-filaments/ NinjaFlex]
| [[MK1-250]] || 225 || 20 (51) || 40 || 500 || 500
| [[MK1-250]] || 225 || 20 (51) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500
|-
|-
! [http://en.wikipedia.org/wiki/Nylon Nylon]
! [http://en.wikipedia.org/wiki/Nylon Nylon]
| [[MK1-250]] || 225 || 10 (25) || 80 || 2000 || 4000
| [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000
|-
|-
! [http://taulman3d.com/t-glase-features.html T-Glase]
! [http://taulman3d.com/t-glase-features.html T-Glase]
| [[MK1-250]] || 225 || 10 (25) || 80 || 2000 || 4000
| [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay]
! [http://www.orbi-tech.de/shop/3D-Filamente/BendLay:::72_121.html BendLay]
| [[MK1-250]] || 225 || 10 (25) || 50 || 500 || 500
| [[MK1-250]] || 225 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html LayBrick]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayBrick:::72_75.html LayBrick]
| [[MK1-250]] || 225 || 10 (25) || 80 || 500 || 500
| [[MK1-250]] || 225 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 500 || 500
|-
|-
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3]
! [http://www.orbi-tech.de/shop/3D-Filaments/LayWoo-d3:::72_76.html LayWoo-d3]
| [[MK1-250]] || 220/205 || 10 (25) || 80 || 2000 || 4000
| [[MK1-250]] || 220/205 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000
|-
|-
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET]
! [http://en.wikipedia.org/wiki/Polyethylene_terephthalate PET]
| [[MK1-250]] || 210 || 10 (25) || 40 || 500 || 500
| [[MK1-250]] || 210 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500
|-
|-
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA]
! [http://en.wikipedia.org/wiki/Polyvinyl_alcohol PVA]
| [[MK1-250]] || 210 || 10 (25) || 40 || 500 || 500
| [[MK1-250]] || 210 || 10 (25) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 500 || 500
|-
|-
! [http://en.wikipedia.org/wiki/Clay Clay]
! [http://en.wikipedia.org/wiki/Clay Clay]
| [[EMO-25]] || - || - || - || 20 || 20
| [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20
|-
|-
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay]
! [http://en.wikipedia.org/wiki/Metal_clay Metal Clay], <br/> [http://en.wikipedia.org/wiki/Metal_clay#Precious_Metal_Clay_.28PMC.29 Precious Metal Clay]
| [[EMO-25]] || - || - || - || 20 || 20
| [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20
|-
|-
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene]
! [http://en.wikipedia.org/wiki/Polypropylene Polypropylene]
Line 60: Line 63:
|-
|-
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate]
! [http://en.wikipedia.org/wiki/Polycarbonate Polycarbonate]
| [[MK1-350]] || 350 || 10 (25) || 80 || 2000 || 4000
| [[MK1-350]] || 350 || 10 (25) || 80 || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 4000
|-
|-
! [http://en.wikipedia.org/wiki/Porcelain Porcelain]
! [http://en.wikipedia.org/wiki/Porcelain Porcelain]
| [[EMO-25]] || - || - || - || 20 || 20
| [[EMO-25]] || - || - || - || Ceramic Tile || 20 || 20
|-
|-
! [http://en.wikipedia.org/wiki/Plasticine Plasticine]
! [http://en.wikipedia.org/wiki/Plasticine Plasticine]
| [[EMO-25]] || - || - || - || 500 || 500
| [[EMO-25]] || - || - || - || Glass || 500 || 500
|-
|-
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh]
! [http://www.hasbro.com/playdoh/en_AU/ Play-Doh]
| [[EMO-25]] || - || - || - || 250 || 250
| [[EMO-25]] || - || - || - || Glass || 250 || 250
|-
|-
! [http://www.sculpey.com/ Sculpey]
! [http://www.sculpey.com/ Sculpey]
Line 75: Line 78:
|-
|-
! [https://sugru.com/ Sugru]
! [https://sugru.com/ Sugru]
| [[EMO-25]] || - || - || - || 250 || 250
| [[EMO-25]] || - || - || - || Glass || 250 || 250
|-
|-
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone]
! [http://en.wikipedia.org/wiki/RTV_silicone RTV Silicone]
| [[EMO-25]] ||| - || - || - || 250 || 250
| [[EMO-25]] ||| - || - || - || Glass || 250 || 250
|-
|-
! [http://www.dutchfilaments.com/flex-45-filament/ Flex45]
! [http://www.dutchfilaments.com/flex-45-filament/ Flex45]
| [[MK2-250]] ||| 215 || 20 (51) || 40 || 800 || 800
| [[MK2-250]] ||| 215 || 20 (51) || 40 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 800 || 800
|-
|-
! [https://en.wikipedia.org/wiki/Polystyrene#Copolymers HIPS]
! [https://en.wikipedia.org/wiki/Polystyrene#Copolymers HIPS]
| [[MK1-250]] ||| 235 || 10 (25) || 50 || 2000 || 4000
| [[MK1-250]] ||| 235 || 10 (25) || 50 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-cold-3d-printer-build-surface EZ-Stik Cold] || 2000 || 4000
|-
|-
! [https://orbi-tech.de/shop/3D-Filaments/Mold-Lay:::72_124.html Moldlay]
! [https://orbi-tech.de/shop/3D-Filaments/Mold-Lay:::72_124.html Moldlay]
| [[MK2-250]] ||| 175 || 10 (25) || n/a || 500 || 500
| [[MK2-250]] ||| 175 || 10 (25) || n/a ||  || 500 || 500
|-
|-
! [http://en.wikipedia.org/wiki/PETG PETG]
! [http://en.wikipedia.org/wiki/PETG PETG]
| [[MK1-250]] ||| 235 || 10 (25) || 80 || 2000 || 4000
| [[MK1-250]] ||| 235 || 10 (25) || 80 || [https://www.geckotek.co/collections/ez-stik-hot/products/ez-stik-hot-3d-printer-build-surface/ EZ-Stik Hot] || 2000 || 4000
|-
|-
! [https://en.wikipedia.org/wiki/Polyethylene_glycol PEG]
! [https://en.wikipedia.org/wiki/Polyethylene_glycol PEG]
| [[KRA-15]] ||| 65 || - || - || 2000 || 4000
| [[KRA-15]] ||| 65 || - || - ||  || 2000 || 4000
|-
|-
! [https://en.wikipedia.org/wiki/Polyether_ether_ketone PEEK]
! [https://en.wikipedia.org/wiki/Polyether_ether_ketone PEEK]
| [[MK1-450]] ||| 405 || 10 (25) || 200* || 2000 || 4000
| [[MK1-450]] ||| 405 || 10 (25) || 200* || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 4000
|-
|-
! [http://en.wikipedia.org/wiki/Wax Wax (molten)]
! [http://en.wikipedia.org/wiki/Wax Wax (molten)]
| [[KRA-15]] ||| varies || - || - || 1000 || 1000
| [[KRA-15]] ||| varies || - || - || Glass || 1000 || 1000
|-
|-
! [https://www.sculpteo.com/en/glossary/3d-printed-wax/ Wax (filament)]
! [https://www.sculpteo.com/en/glossary/3d-printed-wax/ Wax (filament)]
| [[MK1-250]] ||| varies || - || - || 2000  || 4000
| [[MK1-250]] ||| varies || - || - || Glass || 2000  || 4000
|-
|-
! [https://en.wikipedia.org/wiki/Polycaprolactone PCL]
! [https://en.wikipedia.org/wiki/Polycaprolactone PCL]
| [[KRA-15]] ||| 75 || - || - || 1000 || 1000
| [[KRA-15]] ||| 75 || - || - || Glass || 1000 || 1000
|-
|-
! [https://en.wikipedia.org/wiki/Polyphenylsulfone PPSU]
! [https://en.wikipedia.org/wiki/Polyphenylsulfone PPSU]
| [[MK1-450]] ||| 405 || varies || 130* || 2000 || 2000
| [[MK1-450]] ||| 405 || varies || 130* || [http://www.anycubic3d.com/products/show/1060.html Ultrabase] || 2000 || 2000
|-
|-
|}
|}

Revision as of 14:21, 9 April 2019


A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below).

Note: we've had GREAT SUCCESS and are very impressed with the GeckoTek EZ-Stik build plates, and now recommend them for most thermoplastics (printing at under 350C; they stick TOO well to PEEK and Ultem):

Material Reference Chart
Material Extruder Head (°C) Fan %* HotBed (°C) Surface ESR,30M
mm/min
Hydra
mm/min
ABS MK1-250 240/235 10 (25) 110 EZ-Stik Hot 2000 4000
PLA MK1-250 185/180 10 (25) 40 EZ-Stik Cold 2000 4000
PlastInk Rubber MK1-250 225 10 (25) 50 EZ-Stik Cold 2000 4000
NinjaFlex MK1-250 225 20 (51) 40 EZ-Stik Cold 500 500
Nylon MK1-250 225 10 (25) 80 EZ-Stik Hot 2000 4000
T-Glase MK1-250 225 10 (25) 80 EZ-Stik Hot 2000 4000
BendLay MK1-250 225 10 (25) 50 EZ-Stik Cold 500 500
LayBrick MK1-250 225 10 (25) 80 EZ-Stik Hot 500 500
LayWoo-d3 MK1-250 220/205 10 (25) 80 EZ-Stik Hot 2000 4000
PET MK1-250 210 10 (25) 40 EZ-Stik Cold 500 500
PVA MK1-250 210 10 (25) 40 EZ-Stik Cold 500 500
Clay EMO-25 - - - Ceramic Tile 20 20
Metal Clay,
Precious Metal Clay
EMO-25 - - - Ceramic Tile 20 20
Polypropylene MK1-250 235 10 (25) 80 2000 4000
Polycarbonate MK1-350 350 10 (25) 80 Ultrabase 2000 4000
Porcelain EMO-25 - - - Ceramic Tile 20 20
Plasticine EMO-25 - - - Glass 500 500
Play-Doh EMO-25 - - - Glass 250 250
Sculpey EMO-25 - - - 250 250
Sugru EMO-25 - - - Glass 250 250
RTV Silicone EMO-25 - - - Glass 250 250
Flex45 MK2-250 215 20 (51) 40 EZ-Stik Cold 800 800
HIPS MK1-250 235 10 (25) 50 EZ-Stik Cold 2000 4000
Moldlay MK2-250 175 10 (25) n/a 500 500
PETG MK1-250 235 10 (25) 80 EZ-Stik Hot 2000 4000
PEG KRA-15 65 - - 2000 4000
PEEK MK1-450 405 10 (25) 200* Ultrabase 2000 4000
Wax (molten) KRA-15 varies - - Glass 1000 1000
Wax (filament) MK1-250 varies - - Glass 2000 4000
PCL KRA-15 75 - - Glass 1000 1000
PPSU MK1-450 405 varies 130* Ultrabase 2000 2000
  • Note: Be sure the fan directs air to the material and not directly at the nozzle.
  • Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.
  • Note: PEEK is normally printed on Anycubic Ultrabase, or on an ABS base layer; PPSU is normally printed on a PC base layer.

Please note that there is a nice chart on the Simplify3D site that compares materials.