Materials

From Hyrel3D
Revision as of 16:07, 21 February 2018 by Davo (talk | contribs)
Jump to navigation Jump to search


A huge variety of materials can be printed with various extruders on the Hyrel machines. Below are the recipes we have so far...

Materials Printable on Hyrel Machines

The following is a list of materials with which the Hyrel machines can print; you can sort by any column. Please note that fans should be OFF for the first five layers, then on at the specified speed (see note below).

Material Reference Chart
Material Extruder Head (°C) Fan %* HotBed (°C) ESR,30M
mm/min
Hydra
mm/min
ABS MK1-250 240/235 10 (25) 80 2000 4000
PLA MK1-250 185/180 10 (25) 40 2000 4000
PlastInk Rubber MK1-250 225 10 (25) 50 2000 4000
NinjaFlex MK1-250 225 20 (51) 40 500 500
Nylon MK1-250 225 10 (25) 80 2000 4000
T-Glase MK1-250 225 10 (25) 80 2000 4000
BendLay MK1-250 225 10 (25) 50 500 500
LayBrick MK1-250 225 10 (25) 80 500 500
LayWoo-d3 MK1-250 220/205 10 (25) 80 2000 4000
PET MK1-250 210 10 (25) 40 500 500
PVA MK1-250 210 10 (25) 40 500 500
Clay EMO-25 - - - 20 20
Metal Clay,
Precious Metal Clay
EMO-25 - - - 20 20
Polypropylene MK1-250 235 10 (25) 80 2000 4000
Polycarbonate MK1-350 350 10 (25) 80 2000 4000
Porcelain EMO-25 - - - 20 20
Plasticine EMO-25 - - - 500 500
Play-Doh EMO-25 - - - 250 250
Sculpey EMO-25 - - - 250 250
Sugru EMO-25 - - - 250 250
RTV Silicone EMO-25 - - - 250 250
Flex45 MK2-250 215 20 (51) 40 800 800
HIPS MK1-250 235 10 (25) 50 2000 4000
Moldlay MK2-250 175 10 (25) n/a 500 500
PETG MK1-250 235 10 (25) 80 2000 4000
PEG KRA-15 65 - - 2000 4000
PEEK MK1-450 405 10 (25) 200 2000 4000
Wax (molten) KRA-15 varies - - 1000 1000
Wax (filament) MK1-250 varies - - 2000 4000
PCL KRA-15 75 - - 1000 1000
PPSU MK1-450 temp fan bed 2000 4000
  • Note: Be sure the fan directs air to the material and not directly at the nozzle.
  • Note: In Slic3r, you should slice with a fan value between 0 and 39, which will result in a fan speed between 0 and 99, since we have our fans run between 0 and 100, not between 0 and 255 like other printers. Also note that we leave the fan OFF for the first five layers.