Difference between revisions of "Published Papers"

From Hyrel3D
Jump to navigation Jump to search
Line 82: Line 82:


*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]
*[https://arc.aiaa.org/doi/abs/10.2514/6.2021-3699 Extrusion of AP Composite Propellant with Self-aligned Reactive Fibers] by a team from [http://purdue.edu Purdue University] and [https://www.utsa.edu/ University of Texas, San Antonio]
*[ Additively Manufactured Reactive Material Architectures For Exothermic Brazing ] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]
*[https://www.sciencedirect.com/science/article/pii/S2772369021000050 Additively Manufactured Reactive Material Architectures For Exothermic Brazing] by a team from [https://engineering.vanderbilt.edu/ Vanderbilt University's School of Engineering]
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University]  
*[https://pubs.acs.org/doi/full/10.1021/acsmaterialsau.1c00017 Structure–Processing–Property Relationships of 3D Printed Porous Polymeric Materials] by a team from various departments of the [https://engineering.tamu.edu/ College of Engineering, Texas A&M University]  
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]
*[https://link.springer.com/article/10.1557/s43579-021-00062-8 The Potential of Additively Manufactured Membranes for Selective Separation and Capture of CO2] by a team from the [https://coe.upd.edu.ph/academics-overview/graduate-degree-programs/mining-metallurgical-and-materials-engineering/ Department of Mining, Metallurgical, and Materials Engineering, University of the Philippines] and [https://cbe.utk.edu/ Department of Chemical and Biomolecular Engineering and Joint Institute for Advanced Materials, University of Tennessee, Knoxville]

Revision as of 17:53, 16 August 2021

Below is a list of published works citing Hyrel equipment.

Count

274 documents as of 4 August 2021.

Non-Traditional Manufacturing

Including Antennas, Sensors, Inductors, and Circuits; Combined Manufacturing Techniques; Electro-Spinning or Electro-Melt-Spinning; also printing with Embedded Fibers

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Unheated or Chilled Reservoir Printing (DIW)

Also known as Robocasting or DIW, Direct Ink Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016

Published in 2015

Published in 2014

Heated Reservoir Printing (MEW)

Also known as MEW, or Melt Electro-Writing.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Filament Printing (FFF/FDM)

Also known as FFF or FDM, Fused Filament Fabrication or Fused Deposition Modeling.

Published in 2021

Published in 2020

Published in 2019

Published in 2018

Published in 2017

Published in 2016