Difference between revisions of "Reservoir Heads"

From Hyrel3D
Jump to navigation Jump to search
Line 123: Line 123:
== Settings for Reservoir Heads ==
== Settings for Reservoir Heads ==


All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below. '''[[Reservoir_Heads_OLD|Older settings are listed here.]]'''
All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.  
 
'''[[Reservoir_Heads_OLD|Older settings are listed here.]]'''


Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:
Line 131: Line 133:
{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center;"
|+ Settings for Reservoir Heads with METAL Reservoirs  
|+ Settings for Reservoir Heads with METAL Reservoirs  
! rowspan="2" style="width: 10%" | Settings
! style="width: 10%" | Settings
! colspan="6" | [[EMO]], [[VOL]], [[KRA]] (old), [[KR2]] and [[TAM]] (17mm Tubes, Various Gear Ratios)
! style="width: 10%" | [[EMO]]<br>27:1 Ratio
|-
! style="width: 10%" | [[VOL]]<br>51:1 Ratio
! style="width: 10%" | 19:1 Ratio
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1
! style="width: 10%" | 27:1 Ratio
! style="width: 10%" | Super Torque!<br>''Coming soon!''
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | 100:1 KRA (old)
! style="width: 10%" | 100:1 EMO-XT, <br> KR2, TAM
! style="width: 10%" | 100:1 EMO-ST, <br> KR2-ST, TAM-ST
|-  
|-  
!colspan="7"| Material
!colspan="7"| Material
|-  
|-  
! Type  
! Type  
| Custom
| Custom
| Custom
| Custom
| Custom
| Custom
Line 154: Line 150:
| (any)  
| (any)  
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
Line 163: Line 157:
| 1.600
| 1.600
| 1.600  
| 1.600  
| 1.600
| 1.600
| 1.600
| 1.600
|-  
|-  
! Layer  
! Layer  
| 0.300
| 0.300
| 0.300  
| 0.300  
| 0.300  
| 0.300  
Line 178: Line 168:
|-  
|-  
! Print Temp  
! Print Temp  
| 35
| 0
| 35
| 35
| 35
| 35
| 35
| 35
Line 186: Line 174:
|-  
|-  
! Power Factor
! Power Factor
| 100
| 100
| 100
| 100
| 100
| 100
Line 194: Line 180:
|-  
|-  
! Minimum
! Minimum
| 0
| 0
| 0
| 0
| 0
| 0
Line 203: Line 187:
! Maximum
! Maximum
| 0
| 0
| 0/80
| 90
| 0/80
| 180
| 0/80/150
| 270
| 0/80/150/250
| 0/80/150/250
|-  
|-  
!colspan="7"| Overrides
!colspan="7"| Overrides
|-  
|-  
! Pulses / µL
! Pulses / µL
| <span style="color: red;">1.6</span> / <span style="color: blue;">176</span> / <span style="color: green;">176</span>
| 275
| <span style="color: red;">2.3</span> / <span style="color: blue;">275</span> / <span style="color: green;">275</span>
| 517
| <span style="color: red;">4.8</span> / <span style="color: blue;">517</span> / <span style="color: green;">517</span>
| 1200
| <span style="color: red;">9.0</span> / <span style="color: blue;">1,000</span> / <span style="color: green;">1,000</span>
| ?
| <span style="color: red;">15</span> / <span style="color: blue;">600</span> / <span style="color: green;">1200</span>
| <span style="color: red;">?</span> / <span style="color: blue;">?</span> / <span style="color: green;">?</span>
|-  
|-  
! Multiplier  
! Multiplier  
Line 224: Line 204:
| 1
| 1
| 1
| 1
| <span style="color: red;">1</span> / <span style="color: blue;">2</span> / <span style="color: green;">1</span>
| <span style="color: red;">1</span> / <span style="color: blue;">2</span> / <span style="color: green;">1</span>
|-  
|-  
! colspan="7"| Prime
! colspan="7"| Prime
|-
|-
! Steps  
! Steps  
| 7000
| 6000
| 6000
| 1000
| 1000
| 3000
| 6000
| 6000
| ?
| ?
|-
|-
! Rate
! Rate
| 10,000
| 10,000
| 10,000  
| 10,000  
| 10,000
| 10,000
Line 246: Line 220:
|-  
|-  
! Dwell Time (ms)
! Dwell Time (ms)
| 700
| 600
| 600
| 100
| 100
| 300
| 600
| 600
| ?
| ?
|-   
|-   
! Before Tool Change
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| n/a
|-
! colspan="7"| Unprime
! colspan="7"| Unprime
|-  
|-  
! Steps  
! Steps  
| 7000
| 6000
| 6000
| 1000
| 1000
| 3000
| 6000
| 6000
| ?
| ?
|-
|-
! Rate
! Rate
| 10,000
| 10,000
| 10,000  
| 10,000  
| 10,000
| 10,000
Line 280: Line 240:
|-  
|-  
! Dwell Time
! Dwell Time
| <span style="color: red;">600</span> / <span style="color: blue;">-700</span> / <span style="color: green;">-700</span>
| -600
| <span style="color: red;">500</span> / <span style="color: blue;">-600</span> / <span style="color: green;">-600</span>
| -100
| <span style="color: red;">100</span> / <span style="color: blue;">-100</span> / <span style="color: green;">-100</span>
| -600
| <span style="color: red;">300</span> / <span style="color: blue;">-300</span> / <span style="color: green;">-300</span>
| ?
| <span style="color: red;">500</span> / <span style="color: blue;">-600</span> / <span style="color: green;">-600</span>
| n/a
|-
! After Tool Change
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">2</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">n/a</span>
| n/a
|-
|-
!colspan="7"| Offsets
!colspan="7"| Offsets
|-
! Clone Head
| Off
| Off
| Off
| Off
| Off
| Off
|-  
|-  
! X
! X
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
|-  
|-  
! Y
! Y
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
Line 323: Line 261:
! Z
! Z
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
Line 332: Line 268:
|-  
|-  
! Model
! Model
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)
Line 340: Line 274:
|-  
|-  
! PCB Type
! PCB Type
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">4988/160J</span>
| 4988/160J
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">4988/160J</span>
| 4988/160J
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">4988/160J</span>
| 4988/160J
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">4988/160J</span>
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">4988/160J</span>
| 4988/160J
| 4988/160J
|-  
|-  
Line 352: Line 284:
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
| 1k PLAT_RTD
|- 
! Motor Current
| <span style="color: red;">High</span> / <span style="color: blue;">High</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">High</span> / <span style="color: blue;">High</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">High</span> / <span style="color: blue;">High</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">High</span> / <span style="color: blue;">High</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">High</span> / <span style="color: blue;">High</span> / <span style="color: green;">n/a</span>
| n/a
|-  
|-  
! Step Mode
| <span style="color: red;">16th</span> / <span style="color: blue;">16th</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">16th</span> / <span style="color: blue;">16th</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">16th</span> / <span style="color: blue;">16th</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">16th</span> / <span style="color: blue;">16th</span> / <span style="color: green;">n/a</span>
| <span style="color: red;">16th</span> / <span style="color: blue;">16th</span> / <span style="color: green;">n/a</span>
| n/a
|-
! Plot Settings  
! Plot Settings  
| (any)  
| (any)  
| (any)
| (any)
| (any)
| (any)  
| (any)  
| (any)
| (any)
| (any)
|-
|-
Line 382: Line 294:
|-
|-
! Step Mode
! Step Mode
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">16th</span>
| 16th
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">16th</span>
| 16th
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">16th</span>
| 16th
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">16th</span>
| 16th
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">16th</span>
| ?
|-
|-
! Motor Current
! Motor Current
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">Normal</span>
| Normal
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">Normal</span>
| Normal
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">Normal</span>
| Normal
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">Normal</span>
| Normal
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">Normal</span>
| ?
|-
|-
! Max Jog Rate
! Max Jog Rate
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">5,000</span>
| 5,000
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">5,000</span>
| 10,000
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">10,000</span>
| 15,000
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">15,000</span>
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">15,000</span>
| ?
| ?
|-
|-
! Rot Speed
! Rot Speed
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">7,500</span>
| 1,500
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">1,500</span>
| 1,500
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">1,500</span>
| 15,000
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">15,000</span>
| <span style="color: red;">n/a</span> / <span style="color: blue;">n/a</span> / <span style="color: green;">15,000</span>
| ?
| ?
|-
|-
! rowspan="2" style="width: 15%" | Settings
! style="width: 10%" | Settings
! style="width: 10%" | 19:1 Ratio
! style="width: 10%" | [[EMO]]<br>27:1 Ratio
! style="width: 10%" | 27:1 Ratio
! style="width: 10%" | [[VOL]]<br>51:1 Ratio
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1
! style="width: 10%" | 100:1 KRA (old)
! style="width: 10%" | Super Torque!<br>''Coming soon!''
! style="width: 10%" | 100:1 EMO-XT, <br> KR2, TAM
! style="width: 10%" | 100:1 EMO-ST, <br> KR2-ST, TAM-ST
|-
! colspan="6" | [[EMO]], [[VOL]], [[KRA]] (old), [[KR2]] and [[TAM]] (17mm Tubes, Various Gear Ratios)
|-
|-
|}
|}

Revision as of 12:31, 15 July 2020

Reservoir Heads is how we print (also known as Direct Ink Writing or Robocasting) with fluid or emulsified (non-filament-based) materials which are deposited at, above, or below room temperature, with or without UV Crosslinking.

Materials for Reservoir Heads

Reservoir Heads heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.

The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.

Reservoir Heads

Ambient or sub-ambient deposition is available through the following Reservoir-based heads:

Heated deposition is available through the following Reservoir-based heads:

EMO-Type Head Comparison
Temperature > 20°C < Ambient Ambient Up to 50°C Up to 90°C Up to 180°C Up to 270°C
Crosslinking
Optional
RSD-30 EMO-25
SDS-5, -10,
SDS-30, -60
SMH-2
HSD-30 HSD-10
VOL-25
KRA-15
KR2-15
TAM-15

Note, RSD-30 will take you about 20C below ambient.

So, what do these goofy designations actually stand for?

EMO: Emulsifiables at Room Temperature - Low to Medium Viscosity
COD: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
VOL: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
TAM: Tambora: Heated (up to 300°C) Emulsifiables - High Viscosity
SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
HSD: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
RSD: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
SMH: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity

Research Papers Citing Hyrel Reservoir Heads

These are now listed by year here.

Firmware Versions for Reservoir Heads

Firmware information is listed on our Firmware page.

Settings for Reservoir Heads

All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.

Older settings are listed here.

Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:

METAL Reservoir Heads

Settings for Reservoir Heads with METAL Reservoirs
Settings EMO
27:1 Ratio
VOL
51:1 Ratio
EMO-XT, KR2, TAM
100:1
Super Torque!
Coming soon!
Material
Type Custom Custom Custom Custom
Color (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600
Layer 0.300 0.300 0.300 0.300
Temp Info
Print Temp 0 35 35 35
Power Factor 100 100 100 100
Minimum 0 0 0 0
Maximum 0 90 180 270
Overrides
Pulses / µL 275 517 1200 ?
Multiplier 1 1 1 1
Prime
Steps 6000 1000 6000 ?
Rate 10,000 10,000 10,000 ?
Dwell Time (ms) 600 100 600 ?
Unprime
Steps 6000 1000 6000 ?
Rate 10,000 10,000 10,000 ?
Dwell Time -600 -100 -600 ?
Offsets
X 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies)
PCB Type 4988/160J 4988/160J 4988/160J 4988/160J
RTD Type 1k PLAT_RTD 1k PLAT_RTD 1k PLAT_RTD 1k PLAT_RTD
Plot Settings (any) (any) (any) (any)
Motor Settings
Step Mode 16th 16th 16th 16th
Motor Current Normal Normal Normal Normal
Max Jog Rate 5,000 10,000 15,000 ?
Rot Speed 1,500 1,500 15,000 ?
Settings EMO
27:1 Ratio
VOL
51:1 Ratio
EMO-XT, KR2, TAM
100:1
Super Torque!
Coming soon!

PLASTIC Reservoir Heads

Settings for Reservoir Heads with PLASTIC Reservoirs
Settings SDS, HSD, and RSD Heads (with or without COD)
(Various Tube Diameters, Standard Gear Ratios)
DSD-50 (1:1) Special (with or without COD)
1cc ET 5cc 10cc 30cc 60cc 150cc XT DSD-50 HSD-10-Ardes SDS-30XT SDS-60XT
Material
Type Custom Custom Custom Custom Custom Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any) (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 1.600 4.00 1.600 1.600 1.600 1.6000
Layer 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300 0.300
Temp Info
Print Temp 0 0 0 0 0 0 0 35 0 0
Power Factor 100 100 100 100 100 100 100 100 100 100
Minimum 0 0 0 0 0 0 0 0 0 0
Maximum 0 0 0 0; 75 for HSD 0 0 0 130 0 0
Overrides
Pulses / µL 5.8 / 610 / 610 0.75 / 81 / 81 0.58 / 62.5 / 62.5 0.225 / 30 / 30 0.15 / 19.4 / 19.4 12.8 / 12.8 / 12.8 0.135 / 20 / 20 ? / 900 / 900 ? / 86 / 86 ? / 25 / 28.8
Multiplier 1.000 1.000 1.000 1.000 1.000 1.000 1.000 1 / 2 / 2 1.000 1.000
Prime
Steps 7500 1500 3000 2250 1500 1500 1 9000 1125 1500
Rate 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms) 800 150 300 300 300 300 100 900 300 300
Before Tool Change 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a
Unprime
Steps 7500 1500 3000 2250 1500 1500 1 9000 1125 1500
Rate 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000 10,000
Dwell Time 800 / -800 / -800 300 / -300 / -300 300 / -300 / -300 300 / -300 / -300 300 / -300 / -300 300 / -300 / -300 1 / -1 / -1 900 / -900 / -900 300 / -300 / -300 300 / -300 / -300
After Tool Change 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a 2 / n/a / n/a
Offsets
Clone Head Off Off Off Off Off Off Off Off Off Off
X 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies) (varies)
PCB Type n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J n/a / n/a / 4988/160J
RTD Type None None None None; varies
for HSD, RSD
None None None 1k_PLAT_RTD None None
Motor Current High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a High / High / n/a
Step Mode 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a 16th / 16th / n/a
Plot Settings (any) (any) (any) (any) (any) (any) (any) (any) (any) (any)
Motor Settings
Step Mode n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th n/a / n/a / 16th
Motor Current n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal n/a / n/a / Normal
Max Jog Rate n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000 n/a / n/a / 10,000
Rot Speed n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 1,500 n/a / n/a / 7,500 n/a / n/a / 1,500 n/a / n/a / 1,500
Settings 1cc ET 5cc 10cc 30cc 60cc 150cc XT DSD-50 HSD-10-Ardes SDS-30XT SDS-60XT
SDS, HSD, and RSD Heads (with or without COD)
(Various Tube Diameters, Standard Gear Ratios)
DSD-50 (1:1) Special (with or without COD)