Difference between revisions of "Reservoir Heads"

From Hyrel3D
Jump to navigation Jump to search
 
(213 intermediate revisions by 2 users not shown)
Line 5: Line 5:
|}
|}


Cold Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at room temperature, with or without UV Crosslinking.
Reservoir Heads is how we print (also known as Direct Ink Writing or Robocasting) with fluid or emulsified (non-filament-based) materials which are deposited at, above, or below room temperature, with or without UV Crosslinking.


Warm Flow is our term for fluid or emulsified (non-filament-based) materials which are deposited at elevated temperatures, with or without UV Crosslinking.
== Nordson and ViscoTec Heads ==


==Materials for Cold and Warm Flow==
[[File:Nordson_viscotec_vipro_medium.jpg|left|200px|caption]] Some customers have requested that we configure our equipment in such a way that heads from other companies like the [https://www.nordson.com/en/divisions/efd/products/fluid-dispensing-systems/ultimus-v-high-precision-dispenser '''Nordson Ultimus V heads'''] or one of the [https://www.viscotec.de/en/products/3d-print-heads/ '''Viscotec Vipro heads'''].


Cold and Warm Flow heads are for printing as follows:
Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.
 
Click image for a larger image.
 
==Materials for Reservoir Heads==
 
Reservoir Heads heads are for printing as follows:


* With pastes, gels, emulsifiables or waxes.
* With pastes, gels, emulsifiables or waxes.
Line 54: Line 60:
</div>
</div>


==Heads for Cold and Warm Flow==
==Reservoir Heads==


Cold Flow is available through the following heads:
Ambient or sub-ambient deposition is available through the following Reservoir-based heads:


<gallery>
<gallery>
File:EMO-25.png|[[EMO]]-25
File:EMO-25.png|[[EMO]]-25
File:COD-25.png|[[COD]]-25
File:COD-25.png|[[EMO]]-25 with UV array
File:SDS-30.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60
File:SDS-30.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60
File:CSD-60.png|[[CSD]]-5, [[CSD]]-10,<br>[[CSD]]-30, [[CSD]]-60
File:CSD-60.png|[[SDS]]-5, [[SDS]]-10,<br>[[SDS]]-30, [[SDS]]-60 with UV array
SMH-2 Static Mixing Head
File:SMH2.jpg | [[SMH]]-2 Static Mixing Head
</gallery>
</gallery>


Warm Flow is available through the following heads:
Heated deposition is available through the following Reservoir-based heads:


<gallery>
<gallery>
File:VOL-25.png|[[VOL]]-25
File:VOL-25.png|[[VOL]]-25
File:VCD-25.png|[[VCD]]-25
File:VCD-25.png|[[VOL]]-25 with UV array
File:KRA-15.png|[[KRA]]-15
File:KRA-15.png|[[KRA]]-15
File:KCD-15.png|[[KCD]]-15
File:KCD-15.png|[[KRA]]-15 with UV array
</gallery>
</gallery>


* [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO and COD Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=ktK256u0sN8 Overview of the EMO Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS and CSD Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=h95IurET7UM Overview of the SDS Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL and VCD Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=9_onCKhT_dg Overview of the VOL Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA and KCD Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=QD2FrZ4kg1g Overview of the KRA Heads]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head]
* [[File:Yt.png]] [https://www.youtube.com/watch?v=DQj6oLfrbLo Overview of the SMH-2 Head]
* Please see our [[Manuals]] as well.


{| border="1" class="wikitable" style="text-align: center; width: 85%;"  
{| border="1" class="wikitable" style="text-align: center; width: 85%;"  
|+ EMO-Type Head Comparison
|+ EMO-Type Head Comparison
! style="width: 15%;" | Temperature >
! style="width: 10%;" | Temperature >
! style="width: 15%;" | Ambient
! style="width: 10%;" | 20°C < Ambient
! style="width: 15%;" | Up to 75°C
! style="width: 10%;" | Ambient
! style="width: 15%;" | Up to 100°C
! style="width: 10%;" | Up to 50°C
! style="width: 15%;" | Up to 150°C
! style="width: 10%;" | Up to 90°C
! style="width: 10%;" | Up to 180°C
! style="width: 10%;" | Up to 270°C
|-
|-
! No Crosslinking
! Crosslinking <br> Optional
| [[EMO]]-25 <br> [[SDS]]-5, -10, -30, -60 <br> SMH-2
| [[RSD]]-30
| [[EMO]]-25 <br> [[SDS]]-5, -10, <br> [[SDS]]-30, -60 <br> SMH-2  
| [[HSD]]-30
| [[HSD]]-30
| [[VOL]]-25
| [[HSD]]-10 <br> [[VOL]]-25
| [[KRA]]-15 <br> [[KR2]]-15
| [[KRA]]-15 <br> [[KR2]]-15
|-
| [[TAM]]-15
! With Crosslinking
| [[COD]]-25 <br> [[CSD]]-5, -10, -30, -60
| [[HCS]]-30
| [[VCD]]-25
| [[KCD]]-15 <br> [[KC2]]-15
|}
|}
Note, RSD-30 will take you about 20C below ambient.


So, what do these goofy designations actually stand for?
So, what do these goofy designations actually stand for?
Line 107: Line 113:
:[[COD]]: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
:[[COD]]: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
:[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
:[[VOL]]: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
:[[VCD]]: Volcanic Crosslink on Demand - Low to Medium Viscosity
:[[KRA]]: Krakatoa: Heated (up to 150°C) Emulsifiables - High Viscosity
:[[KCD]]: Krakatoic Crosslink on Demand - High Viscosity
:[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
:[[KR2]]: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
:[[KC2]]: Krakatoic Crosslink v2; KR2 with Crosslink - Very High Viscosity
:[[TAM]]: Tambora: Heated (up to 270°C) Emulsifiables - High Viscosity
:[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
:[[SDS]]: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
:[[CSD]]: Crosslinking Syringe Dispensing System - Low to Medium Viscosity
:[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
:[[HSD]]: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
:[[CHS]]: Crosslinking Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
:[[RSD]]: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
:[[DSD]]: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
:[[DSD]]: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
:[[SMH]]: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity
:[[SMH]]: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity


As of Nov 2016, the latest firmware is 32V, included with Repetrel 2.828.
== Research Papers Citing Hyrel Reservoir Heads ==
 
These are now listed by year '''[[Research_Papers | here]]'''.
 
== Firmware Versions for Reservoir Heads ==


== Research Papers Citing Hyrel Cold and Warm Flow ==
Firmware information is listed [[Firmware|on our Firmware page]].


* [http://ieeexplore.ieee.org/abstract/document/7999867/?reload=true Self-Actuating 3D Printed Packaging for Deployable Antennas], [http://www.ieee.org/index.html The Institute of Electrical and Electronics Engineers, Incorporated (IEEE)]
== Reservoirs for Reservoir Heads ==
* [http://onlinelibrary.wiley.com/doi/10.1002/cctc.201700829/full Enabling Process Intensification via 3D Printing of Catalytic Structures] by Muxina Konarova (and others), [http://uq.edu.au University of Queensland]
* [https://www.futuremedicine.com/doi/abs/10.2217/3dp-2017-0004?journalCode=3dp 3D Bioprinting for Musculoskeletal Applications] by Alexander Popov, Sara Malferrari, & Deepak M Kalaskar in [https://www.futuremedicine.com Future Medicine]
* [http://ieeexplore.ieee.org/abstract/document/7939416/ UV-assisted 3D-printing of Soft Ferrite Magnetic Components for Power Electronics Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]
*[http://hyrel3d.net/papers/Alginate_Hydrogels_for_Bone_Tissue_Regeneration.pdf Alginate Hydrogels for Bone Tissue Regeneration] by Stephanie T. Bendtsen of [http://uconn.edu The University of Connecticut]
*[http://iopscience.iop.org/article/10.1088/1758-5090/aa7077/meta Fabrication of Biomimetic Bone Grafts with Multi-Material 3D Printing] by Nicholas Sears et. al., of the [https://engineering.tamu.edu/biomedical Biomedical Engineering Department] of [http://www.tamu.edu/ Texas A&M University].
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Magnetic_Components_for_Heterogeneous_Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]
*[http://hyrel3d.net/papers/Tuskegee_Eggshell.pdf Nanoengineered Eggshell–Silver Tailored Copolyester Polymer Blend Film with Antimicrobial Properties] by the [http://www.tuskegee.edu/academics/colleges/ceps/ceps_special_programs/phd_program_in_materials_science_engineering.aspx Department of Materials Science and Engineering] and the Department of Pathobiology, [http://www.tuskegee.edu/academics/colleges/cvmnah/school_of_veterinary_medicine.aspx College of Veterinary Medicine] of [http://www.tuskegee.edu Tuskegee University]
*[http://www.ieeeconfpublishing.org/cpir/UploadedFiles/Additive%20Manufacturing%20of%20Magnetic%20Components%20for%20Heterogeneous%20Integration.pdf Additive Manufacturing of Magnetic Components for Heterogeneous Integration] by Dr. Y. Yan (and others), [http://vt.edu Virginia Tech]
*[https://www.mpif.org/cpmt/studentprojects/Scholar_work_2015-02.pdf Die-Less MIM-style Additive Manufacturing with Controlled Porosity: A Proof of Concept] by the [http://www.lehigh.edu/matsci/ Department of Materials Science and Engineering] of [http://www1.lehigh.edu/home Lehigh University]
*[https://www.dst.defence.gov.au/sites/default/files/events/documents/WCSD%20Presentation.pdf 3D Printed Energetics] by the [https://www.dst.defence.gov.au/research-division/weapons-and-combat-systems-division Weapons and Combat Systems Division] of the [http://defence.gov.au Australian Department of Defense]
*[http://www.anzors.org.au/pdfs/2014-proceedings.pdf Development of 3D printed Ceramic scaffolds for Treatment of Segmental Bone Defects] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]
*[https://www.biomaterials.org/sites/default/files/docs/2015/graduate_abstracts.pdf Graduate Abstract: Dynamic increase in matrix stiffness promotes invasive tumor phenotype in vivo] from multiple organizations, at [https://www.biomaterials.org BioMaterials.org]
*[http://c.ymcdn.com/sites/www.surfaces.org/resource/collection/4423FA75-D640-4955-A412-240A38EF1FAA/2015_Elizabeth_Cosgriffpdf.pdf 3D Printing of High Porosity, Biodegradable Foams with Cure on Dispense] - Presentation by Elizabeth Cosgriff-Hernández of [https://engineering.tamu.edu/biomedical Department of Biomedical Engineering], [http://www.tamu.edu Texas A&M University]
*[http://hyrel3d.net/papers/Design_Meth_Additive_Mfg_Magnetic_Comp_YYan_2017.pdf Design Methodology and Materials for Additive Manufacturing of Magnetic Components] - PhD Thesis of Y. Yan, [http://vt.edu Virginia Tech]
*[http://hyrel3d.net/papers/Sydney_Bioprinting_Presentation.pptx Bioprinting Defined Heterogeneous Cellular Microenvironments] from [http://sydney.edu.au/engineering/research/centres/biomaterials-tissue-engineering/ The Biomaterials and Tissue Engineering Research Unit] of the [http://web.aeromech.usyd.edu.au/index.php Aerospace, Mechanical and Mechatronic Engineering Department] of [http://sydney.edu.au The University of Sydney]
*[http://hyrel3d.net/papers/3D-4D_Printing_and_Stretchable_Conductive_Adhesives.pdf A Novel Approach to Integrating 3D/4D Printing and Stretchable Conductive Adhesive Technologies for High Frequency Packaging Applications]
*[http://hyrel3d.net/papers/Additive_Manufacturing_of_Planar_Inductor.pdf Additive Manufacturing of Planar Inductor for Power Electronics Applications]
*[http://pubs.acs.org/doi/abs/10.1021/nn507488s Bioactive Nanoengineered Hydrogels for Bone Tissue Engineering: A Growth-Factor-Free Approach] in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]
*[http://hyrel3d.net/papers/3D_Printed_Scaffolds_to_Repair_Large_Bone_Deficits.pdf Design and Fabrication of 3D Printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects] in [http://www.nature.com/index.html Nature.com's] [http://www.nature.com/srep/ Scientific Reports]
*[http://hyrel3d.net/papers/Eumlsion_Inks_for_3D_Printing.pdf Emulsion Inks for 3D Printing of High Porosity Materials] in the [http://www.frontiersin.org/10.3389/conf.FBIOE.2016.01.02721/2893/10th_World_Biomaterials_Congress/all_events/event_abstract Macromolecular Journals]
*[http://scholar.google.com/scholar_url?url=http://onlinelibrary.wiley.com/doi/10.1002/app.45083/full&hl=en&sa=X&scisig=AAGBfm08tdsc-a6hdNeaw1xB7JInXsZCeg&nossl=1&oi=scholaralrt Influence of Shear Thinning and Material Flow on Robotic Dispensing of PEG] in in [http://www.acs.org/content/acs/en.html The American Chemical Society's] [http://pubs.acs.org/journal/ancac3 ACS Nano]


== Settings for Cold and Warm Flow Heads ==
We've used different reservoirs over the years. Here are the details.


Non-Hydra units shipping through spring 2017 ship with Repetrel version 2.x. Hydra units, and other units shipping as of summer 2017 will have version 3.x, and should consult the version 3.x tables, below. All units should be upgraded to 3.x when it is available.
=== Metal Reservoirs ===


{| class="wikitable" style="text-align: center;"
{| border="1" class="wikitable" style="text-align: center; width: 80%;"  
! style="background-color: pink;" | <span style="color: maroon;">'''''Values for version 2.x will be inicated in this manner.'''''</span>
|+ Metal Reservoirs
! style="width: 10%;" | Tube Material
! style="width: 10%;" | Plunger <br> O-Rings
! style="width: 10%;" | Nominal <br> Volume
! style="width: 10%;" | ID <br> mm
! style="width: 10%;" | OD <br> mm
! style="width: 10%;" | Default <br> Heads
! style="width: 10%;" | Also <br> Compatible
! style="width: 20%;" | Notes
|-
| Aluminum || 1 || 25 cc || 16.9 mm || 20.2 mm || EMO, VOL || EMO-XT || Modified "Makin"
|-
| Stainless || 1 || 15 cc || 17.7 mm || 20 mm || KRA* || none || Modified "Makin"
|-
| Stainless || 1 || 25 cc || 17.7 mm || 20 mm || none || EMO, VOL, EMO-XT || Modified "Makin"
|-
| Stainless || 2 || 15 cc || 18 mm || 20 mm || KR2, TAM, EMO-XT || none || Custom
|-
|-
! style="background-color: powderblue;" | <span style="color: blue;">'''''Values for version 3.x will be inicated in this manner.'''''</span>
|}
|}


Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings.
=== Plastic Reservoirs ===
 
{| border="1" class="wikitable" style="text-align: center; width: 80%;"
|+ Plastic Reservoirs
! style="width: 20%;" | Default <br> Heads
! style="width: 10%;" | Tube Material
! style="width: 20%;" | Manufacturer
! style="width: 10%;" | Part <br> Number
! style="width: 10%;" | Nominal <br> Volume
! style="width: 10%;" | Notes
! style="width: 20%;" | Hyrel Part
! style="width: 10%;" | Quantity
|-
| SDS-1 || Polypropylene || MHC Easy-Touch || 802010 || 1 cc || none || AN.SYR-01/100-MHC || 100
|-
| SDS-5 || Polypropylene || BD || 309646 || 5 cc || none || AN.SYR-05/125-BD || 125
|-
| SDS-10 || Polypropylene || BD || 309604 || 10 cc || none || AN.SYR-10/100-BD || 100
|-
| SDS-30<br>SDS-30XT || Polypropylene || BD || 302832 || 30 cc || none || AN.SYR-30/54-BD || 54
|-
| SDS-60<br>SDS-60XT || Polypropylene || BD || 309653 || 60 cc || none || AN.SYR-60/40-BD|| 40
|-
| SDS-150XT || Polypropylene || - || - || 150 cc || none || AN.SYR-150/10|| 10
|-
| HSD-10 || Polyamide || Ardes* || || 10 cc || *modified || AN.SYR-10-Ardes || 1
|-
|}
 
== Settings for Reservoir Heads ==
 
All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.
 
'''[[Reservoir_Heads_OLD|Older settings are listed here.]]'''
 
Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:


=== METAL Reservoir Heads ===
=== METAL Reservoir Heads ===


{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center; width: 75%"
|+ Settings for Cold and Warm Flow Heads with METAL Reservoirs  
|+ Default Settings for Reservoir Heads with METAL Reservoirs  
! rowspan="2" style="width: 15%" | Settings
! style="width: 10%" | Settings
! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]]''<br> (17mm Tubes, Various Gear Ratios)
! style="width: 10%" | [[EMO]], [[VOL]]<br>27:1 Ratio
|-
! style="width: 10%" | [[VOL]]<br>51:1 Ratio
! style="width: 10%" | 19:1 Ratio
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1
! style="width: 10%" | 27:1 Ratio
! style="width: 10%" | [[KR2]]-ST <br> Super Torque
! style="width: 10%" | 51:1 Ratio
! style="width: 10%" | EMO-300XT <br> eXtra Torque
! style="width: 10%" | 100:1 KRA
! style="width: 10%" | 100:1 KR2
|-  
|-  
!colspan="6"| Material
!colspan="7"| Material
|-  
|-  
! Type  
! Type  
Line 184: Line 217:
| (any)
| (any)
| (any)
| (any)
| (any)  
| (any)
| (any)
| (any)
|-  
|-  
Line 191: Line 224:
| 1.600
| 1.600
| 1.600  
| 1.600  
| 1.600
| 1.600  
| 1.600
| 1.600
|-  
|-  
! Layer  
! Layer  
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
|-  
|-  
!colspan="6"| Temp Info
!colspan="7"| Temp Info
|-  
|-  
! Print Temp  
! Print Temp  
| 0
| 0, 35
| 35
| 35
| 35
| (varies)
| 35
| 0
| 35
| 35
|-  
|-  
! Power Factor
! Power Factor
Line 225: Line 258:
|-  
|-  
! Maximum
! Maximum
| 0/100/200
| 0
| 0/100/200
| 90
| 0/100/200
| 0 / 180 / 270
| 0/100/200
| 0  
| 0/100/200
| 0
|-  
|-  
!colspan="6"| Overrides
!colspan="7"| Overrides
|-  
|-  
! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x'''''</span>
! rowspan="2" | Pulses / µL
| style="background-color: pink;" | <span style="color: maroon;">'''''1.6'''''</span>
| '''271.9'''
| style="background-color: pink;" | <span style="color: maroon;">'''''2.3'''''</span>
| 517
| style="background-color: pink;" | <span style="color: maroon;">'''''4.7'''''</span>
| '''1297'''
| style="background-color: pink;" | <span style="color: maroon;">'''''9.0'''''</span>
| ?
| style="background-color: pink;" | <span style="color: maroon;">'''''15.0'''''</span>
| ?
|-  
|-  
! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x'''''</span>
| colspan="6" | ''Note: Values above in '''BOLD''' have been validated through multiple sample testing, July 2020.''
| style="background-color: powderblue;" | <span style="color: blue;">'''''176'''''</span>
|-
| style="background-color: powderblue;" | <span style="color: blue;">'''''256'''''</span>
! Multiplier
| style="background-color: powderblue;" | <span style="color: blue;">'''''517'''''</span>
| 1
| style="background-color: powderblue;" | <span style="color: blue;">'''''990'''''</span>
| 1
| style="background-color: powderblue;" | <span style="color: blue;">'''''1650'''''</span>
| 1
| ?
| ?
|-  
|-  
! Feed Rate %
! colspan="7"| Prime
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
|-
|colspan="6"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.''
|-
|-
! Steps  
! Steps  
| 600
| 6000
| 800
| 1000
| 1000
| 4000
| 6000
| 6000
| ?
| ?
|-
|-
! Rate
! Rate
| 10,000  
| 10,000  
| 10,000
| 10,000
| 10,000
| ?
| ?
|-
! Dwell Time (ms)
| 600
| 100
| 600
| ?
|- 
! colspan="7"| Unprime
|-
! Steps
| 6000
| 1000
| 6000
| ?
| ?
|-
! Rate
| 10,000  
| 10,000  
| 10,000
| 10,000
| 10,000
| 10,000
| ?
| ?
|-
! Dwell Time
| -600
| -100
| -600
| ?
| ?
|-
!colspan="7"| Offsets
|-
! X
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-  
|-  
! Dwell Time (ms)
! Y
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
! Z
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-
!colspan="7"| Head Info
|-
! Model
| EMO-25
| VOL-25
| KR2-15 or TAM-15
| (varies)  
| EMO-300XT
|-
! PCB Type
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
|-
! RTD Type
| 1k_PRTD
| 1k_PRTD
| 1k_PRTD
| 1k_PRTD
| 1k_PRTD
|-
! Plot Settings
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="7"| Motor Settings
|-
! Step Mode
| 16th
| 16th
| 16th
| 16th
| ?
|-
! Motor Current
| Normal
| Normal
| Normal
| Normal
| ?
|-
! Max Jog Rate
| 5,000
| 10,000
| 15,000
| ?
| ?
|-
! Rot Speed
| 1,500
| 1,500
| 10,000
| ?
| ?
|-
! style="width: 10%" | Settings
! style="width: 10%" | [[EMO]], [[VOL]]<br>27:1 Ratio
! style="width: 10%" | [[VOL]]<br>51:1 Ratio
! style="width: 10%" | EMO-XT, [[KR2]], [[TAM]]<br>100:1
! style="width: 10%" | [[KR2]]-ST <br> Super Torque
! style="width: 10%" | EMO-300XT <br> eXtra Torque
|-
|}
 
=== PLASTIC Reservoir Heads: Table 1 ===
 
{| class="wikitable" style="text-align: center; width: 75%"
|+ Default Settings for Reservoir Heads with PLASTIC Reservoirs - Table 1: Standard Torque, Single Reservoir
|-
! style="width: 10%" | Settings
! style="width: 10%" | [[SDS]] 1 ET
! style="width: 10%" | [[SDS]] 5
! style="width: 10%" | [[SDS]] 10
! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] 30
! style="width: 10%" | [[SDS]] 60
|-
!colspan="11"| Material
|-
! Type
| Custom
| Custom
| Custom
| Custom
| Custom
|-
! Color
| (any)
| (any)
| (any)
| (any)
| (any)
|-
! Nozzle
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
|-
! Layer
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="11"| Temp Info
|-
! Print Temp
| 0
| 0
| 0
| 0
| 0
|-
! Power Factor
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 100
| 400
| 600
|-  
|-  
! Before Tool Change
! Minimum
| 1
| 0
| 1
| 0
| 1
| 0
| 1
| 0
| 1
| 0
|-
! Maximum
| 0
| 0
| 0
| 0 / 75 / -10
| 0
|-
!colspan="11" | Overrides
|-  
|-  
|colspan="6"| '''Unprime''' <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.''
! rowspan="2" | Pulses / µL
| 270
| '''87.3'''
| '''58.7'''
| '''26.8'''
| '''17.4'''
|-
| colspan="5" | ''Note: Values above in '''BOLD''' have been validated through multiple sample testing, July 2020.''
|-
! Multiplier
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
|-
! colspan="11"| Prime
|-  
|-  
! Steps  
! Steps  
| 500
| 3000
| 650
| 1500
| 800
| 3000
| 3000
| 5000
| 2250
| 1500
|-
|-
! Rate
! Rate
| 10,000  
| 10,000  
| 10,000
| 10,000  
| 10,000  
| 10,000  
| 10,000
| 10,000
| 10,000
| 10,000
|-  
|-  
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
! Dwell Time (ms)
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| 300
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| 150
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| 300
| style="background-color: pink;" | <span style="color: maroon;">'''''300'''''</span>
| 225
| style="background-color: pink;" | <span style="color: maroon;">'''''500'''''</span>
| 150
|-
! colspan="11"| Unprime
|-  
! Steps
| 3000
| 1500
| 3000
| 2250
| 1500
|-
|-
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
! Rate
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
| 10,000
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
| 10,000
| style="background-color: powderblue;" | <span style="color: blue;">'''''-100'''''</span>
| 10,000
| style="background-color: powderblue;" | <span style="color: blue;">'''''-300'''''</span>
| 10,000
| style="background-color: powderblue;" | <span style="color: blue;">'''''-500'''''</span>
| 10,000
|-
! Dwell Time (ms)
| 100
| 100
| 120
| 400
| 200
|-  
|-  
! After Tool Change
! Dwell Time
| 1
| -300
| 1
| -150
| 1
| -300
| 1
| -300
| 1
| -300
|-  
|-  
!colspan="6"| Offsets
!colspan="11"| Offsets
|-  
|-  
! Clone Head
! Clone Head
| Off
| Off
| Off  
| Off  
| Off  
| Off
| Off
| Off
| Off
| Off
|-  
|-  
! X
! X
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
|-  
|-  
! Y
! Y
| 0,000  
| 0,000  
| 0,000
| 0,000 
| 0,000  
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
|-  
|-  
! Z
! Z
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
|-  
|-  
!colspan="6"| Head Info
!colspan="11"| Head Info
|-  
|-  
! Model
! Model
| (varies)
| SDS
| (varies)
| SDS-5
| (varies)
| SDS-10
| (varies)
| SDS-30 / HSD-30 / RSD-30
| (varies)
| SDS-60
|-
! PCB Type
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
|-  
|-  
! RTD Type
! RTD Type
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None / 1k_PRTD / 1k_PRTD
| 1k PLAT_RTD
| None
|-  
|- 
! Plot Settings
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="11"| Motor Settings
|-
! Step Mode
| 16th
| 16th
| 16th
| 16th
| 16th
|-
! Motor Current
! Motor Current
| High
| Normal
| High
| Normal
| High
| Normal
| High
| Normal
| High
| Normal
|-  
|-
! Step Mode
! Max Jog Rate
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
|-  
|-
! rowspan="2" style="width: 15%" | Settings
! Rot Speed
! style="width: 10%" | 19:1 Ratio
| 1500
! style="width: 10%" | 27:1 Ratio
| 1500
! style="width: 10%" | 51:1 Ratio
| 1500
! style="width: 10%" | 100:1 Ratio
| 1500
! style="width: 10%" | 100:1 KR2
| 1500
|-
|-
! colspan="5" | [[EMO]], [[VOL]], [[KRA]], [[COD]], [[VCD]], [[KCD]] Heads ''and New [[KR2]]''<br> (17mm Tubes, Various Gear Ratios)
! style="width: 10%" | Settings
! style="width: 10%" | [[SDS]] 1 ET
! style="width: 10%" | [[SDS]] 5
! style="width: 10%" | [[SDS]] 10
! style="width: 15%" | [[SDS]]/[[HSD]]/[[RSD]] 30
! style="width: 10%" | [[SDS]] 60
 
|-
|-
|}
|}


=== PLASTIC Reservoir Heads ===
=== PLASTIC Reservoir Heads: Table 2 ===


{| class="wikitable" style="text-align: center;"
{| class="wikitable" style="text-align: center; width= 75%"
|+ Settings for Cold and Warm Flow Heads with PLASTIC Reservoirs  
|+ Default Settings for Reservoir Heads with PLASTIC Reservoirs - Table 2: Higher Torque and Dual Reservoir
! rowspan="2" style="width: 15%" | Settings
! style="width: 10%" | Settings
! colspan="4" | [[SDS]], [[CSD]], [[HSD]], and [[CHS]] Heads <br> (Various Tube Diameters, Standard Gear Ratios)
! style="width: 10%" | [[HSD-10-Ardes]]
! colspan="1" | [[DSD-50]] (1:1)
! style="width: 10%" | [[SDS]]-30-XT
|-
! style="width: 10%" | [[SDS]]-60-XT
! style="width: 10%" | 5cc
! style="width: 10%" | [[SDS]]-150-XT
! style="width: 10%" | 10cc
! style="width: 10%" | [[DSD-50]]
! style="width: 10%" | 30cc
! style="width: 10%" | 60cc
! style="width: 10%" | DSD-50
|-  
|-  
!colspan="7"| Material
!colspan="6"| Material
|-  
|-  
! Type  
! Type  
Line 423: Line 676:
|-  
|-  
! Color  
! Color  
| (any)
| (any)  
| (any)  
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
| (any)
|-  
|-  
! Nozzle  
! Nozzle  
| 1.600  
| 1.600  
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 1.600
| 4.00
|-  
|-  
! Layer  
! Layer  
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
| 0.300
| (any)
|-  
|-  
!colspan="7"| Temp Info
!colspan="6"| Temp Info
|-  
|-  
! Print Temp  
! Print Temp  
| 35
| 0
| 0
| 0
| 0
| 0* <br> *35 for HSD
| 0
| 0
| 0
| 0
Line 467: Line 720:
|-  
|-  
! Maximum
! Maximum
| 75
| 0
| 0
| 0
| 0
| 0* <br> *75 for HSD
| 0
| 0
| 0
| 0
|-  
|-  
!colspan="7"| Overrides
!colspan="6"| Overrides
|-  
|-  
! style="background-color: pink;" | <span style="color: maroon;">'''''Pulses: v2.x'''''</span>
! rowspan="2" | Pulses / µL
| style="background-color: pink;" | <span style="color: maroon;">'''''0.75'''''</span>
| 1800
| style="background-color: pink;" | <span style="color: maroon;">'''''0.58'''''</span>
| 86
| style="background-color: pink;" | <span style="color: maroon;">'''''0.225'''''</span>
| '''29.1'''
| style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span>
| 12.8
| style="background-color: pink;" | <span style="color: maroon;">'''''0.15'''''</span>
| 20
|-
|-
! style="background-color: powderblue;" | <span style="color: blue;">'''''Pulses: v3.x'''''</span>
| colspan="5" | ''Note: Values above in '''BOLD''' have been validated through multiple sample testing, July 2020.''
| style="background-color: powderblue;" | <span style="color: blue;">'''''81'''''</span>
|-
| style="background-color: powderblue;" | <span style="color: blue;">'''''62.5'''''</span>
! Multiplier
| style="background-color: powderblue;" | <span style="color: blue;">'''''24.3'''''</span>
| 1.000
| style="background-color: powderblue;" | <span style="color: blue;">'''''16.2'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''16.2'''''</span>
|-
! Feed Rate %
| 1.000  
| 1.000  
| 1.000  
| 1.000  
| 1.000
| 1.000
| 1.000
| 1.000
| 1.000
|-
|-  
! colspan="6"| Prime
|colspan="7"| '''Prime''' <br> ''Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.''
|-  
|-  
! Steps  
! Steps  
| 200
| 9000
| 200
| 1125
| 300
| 1500
| 500
| 1500
| 500
| 1
|-
|-
! Rate
! Rate
Line 513: Line 761:
|-  
|-  
! Dwell Time (ms)
! Dwell Time (ms)
| 100
| 900
| 100
| 115
| 100
| 150
| 100
| 150
| 1000
|-
! Before Tool Change
| 1
| 1
| 1
| 1
| 1
| 1
|-  
|-  
|colspan="7"| '''Unprime'''  <br> ''Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.''
! colspan="6"| Unprime
|-  
|-  
! Steps  
! Steps  
| 160
| 9000
| 160
| 1125
| 225
| 1500
| 400
| 1500
| 400
| 1
|-
|-
! Rate
! Rate
| 10,000  
| 10,000  
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
| 10,000
|-  
|-  
! style="background-color: pink;" | <span style="color: maroon;">'''''Dwell Time (ms): v2.x'''''</span>
! Dwell Time
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| -900
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| -300
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| -300
| style="background-color: pink;" | <span style="color: maroon;">'''''100'''''</span>
| -300
| style="background-color: pink;" | <span style="color: maroon;">'''''1000'''''</span>
| -100
|-  
|-
! style="background-color: powderblue;" | <span style="color: blue;">'''''Dwell Time (ms): v3.x'''''</span>
!colspan="6"| Offsets
| style="background-color: powderblue;" | <span style="color: blue;">'''''-31'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-31'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-38'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-55'''''</span>
| style="background-color: powderblue;" | <span style="color: blue;">'''''-55'''''</span>
|-
! After Tool Change
| 1
| 1
| 1
| 1
| 1
|-  
!colspan="7"| Offsets
|-
! Clone Head
| Off
| Off
| Off
| Off
| Off
|-  
|-  
! X
! X
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
| 0,000
Line 581: Line 801:
! Y
! Y
| 0,000  
| 0,000  
| 0,000
| 0,000  
| 0,000  
| 0,000  
| 0,000  
| 0,000  
Line 587: Line 807:
|-  
|-  
! Z
! Z
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
| 0,000
| 0,000  
| 0,000  
| 0,000
| 0,000
|-  
|-  
!colspan="7"| Head Info
!colspan="6"| Head Info
|-  
|-  
! Model
! Model
| (varies)
| (varies)  
| (varies)
| (varies)
| (varies)
| (varies)
| (varies)  
| (varies)  
| (varies)  
| (varies)  
|-
! PCB Type
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
| 4988/160J
|-  
|-  
! RTD Type
! RTD Type
| 1k PLAT_RTD
| 1k_PLAT_RTD
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None
| 1k PLAT_RTD
| None
|-  
|- 
! Plot Settings
| (any)
| (any)
| (any)
| (any)
| (any)
|-
!colspan="6"| Motor Settings
|-
! Step Mode
| 16th
| 16th
| 16th
| 16th
| 16th
|-
! Motor Current
! Motor Current
| High
| Normal
| High
| Normal
| High
| Normal
| High
| Normal
| High
| Normal
|-  
|-
! Step Mode
! Max Jog Rate
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
| Sixteenth
| 10,000
|-  
|-
! rowspan="2" style="width: 15%" | Settings
! Rot Speed
! style="width: 10%" | 5cc
| 7,500
! style="width: 10%" | 10cc
| 1,500
! style="width: 10%" | 30cc
| 1,500
! style="width: 10%" | 60cc
| 1,500
| 1,500
|-
! style="width: 10%" | Settings
! style="width: 10%" | [[HSD-10-Ardes]]
! style="width: 10%" | [[SDS]]-30-XT
! style="width: 10%" | [[SDS]]-60-XT
! style="width: 10%" | [[SDS]]-150-XT
! style="width: 10%" | DSD-50
! style="width: 10%" | DSD-50
|-
! colspan="4" | [[SDS]], [[CSD]], [[HSD]], and [[CHS]] Heads <br> (Various Tube Diameters, Standard Gear Ratios)
! colspan="1" | [[DSD]]-50 (1:1)
|-
|-
|}
|}

Latest revision as of 14:19, 24 June 2021

Reservoir Heads is how we print (also known as Direct Ink Writing or Robocasting) with fluid or emulsified (non-filament-based) materials which are deposited at, above, or below room temperature, with or without UV Crosslinking.

Nordson and ViscoTec Heads

caption

Some customers have requested that we configure our equipment in such a way that heads from other companies like the Nordson Ultimus V heads or one of the Viscotec Vipro heads.

Yes, Hyrel equipment can accommodate these and other print heads with just a little custom code and a special tool holder. Please contact us if you have any questions at all.

Click image for a larger image.

Materials for Reservoir Heads

Reservoir Heads heads are for printing as follows:

  • With pastes, gels, emulsifiables or waxes.
  • At room or elevated temperatures.
  • With or without UV Crosslining.
  • With Hyrel Nozzles (1.5mm, 2mm) or Luer Tips.

The following materials can be printed from Cold Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips.

The following materials can be printed from Warm Flow heads. Note that more viscous materials may not be suitable for plastic syringes or smaller luer tips, or may print more easily at higher temperatures.

Reservoir Heads

Ambient or sub-ambient deposition is available through the following Reservoir-based heads:

Heated deposition is available through the following Reservoir-based heads:

EMO-Type Head Comparison
Temperature > 20°C < Ambient Ambient Up to 50°C Up to 90°C Up to 180°C Up to 270°C
Crosslinking
Optional 		RSD-30 EMO-25
SDS-5, -10,
SDS-30, -60
SMH-2 		HSD-30 HSD-10
VOL-25 		KRA-15
KR2-15 		TAM-15

Note, RSD-30 will take you about 20C below ambient.

So, what do these goofy designations actually stand for?

EMO: Emulsifiables at Room Temperature - Low to Medium Viscosity
COD: Emulsifiables T Room Temperature with Crosslink On Demand - Low to Medium Viscosity
VOL: Volcano: Heated (up to 100°C) Emulsifiables - Low to Medium Viscosity
KR2: Krakatoa v2: a more robust KRA head with a double gasketed plunger hotter, more viscous Emulsifiables - Very High Viscosity
TAM: Tambora: Heated (up to 270°C) Emulsifiables - High Viscosity
SDS: Syringe Dispensing System (uses disposable plastic syringes at room temperature) - Low Viscosity
HSD: Heated (formerly Volcanic) Syringe Dispensing System - Low to Medium Viscosity
RSD: Refrigerated Syringe Dispensing System - Low to Medium Viscosity
DSD: Dual Syringe Dispenser, dispensing two-part mixtures at a fixed ratio - Low to Medium Viscosity
SMH: Static Mixing Head, blending your ratio of material through a baffled nozzle - Low to Medium Viscosity

Research Papers Citing Hyrel Reservoir Heads

These are now listed by year here.

Firmware Versions for Reservoir Heads

Firmware information is listed on our Firmware page.

Reservoirs for Reservoir Heads

We've used different reservoirs over the years. Here are the details.

Metal Reservoirs

Metal Reservoirs
Tube Material Plunger
O-Rings 		Nominal
Volume 		ID
mm 		OD
mm 		Default
Heads 		Also
Compatible 		Notes
Aluminum 1 25 cc 16.9 mm 20.2 mm EMO, VOL EMO-XT Modified "Makin"
Stainless 1 15 cc 17.7 mm 20 mm KRA* none Modified "Makin"
Stainless 1 25 cc 17.7 mm 20 mm none EMO, VOL, EMO-XT Modified "Makin"
Stainless 2 15 cc 18 mm 20 mm KR2, TAM, EMO-XT none Custom

Plastic Reservoirs

Plastic Reservoirs
Default
Heads 		Tube Material Manufacturer Part
Number 		Nominal
Volume 		Notes Hyrel Part Quantity
SDS-1 Polypropylene MHC Easy-Touch 802010 1 cc none AN.SYR-01/100-MHC 100
SDS-5 Polypropylene BD 309646 5 cc none AN.SYR-05/125-BD 125
SDS-10 Polypropylene BD 309604 10 cc none AN.SYR-10/100-BD 100
SDS-30
SDS-30XT		 Polypropylene BD 302832 30 cc none AN.SYR-30/54-BD 54
SDS-60
SDS-60XT		 Polypropylene BD 309653 60 cc none AN.SYR-60/40-BD 40
SDS-150XT Polypropylene - - 150 cc none AN.SYR-150/10 10
HSD-10 Polyamide Ardes* 10 cc *modified AN.SYR-10-Ardes 1

Settings for Reservoir Heads

All printers and heads shipping after 1 Jan 2020 have shipped with some release of version 4, and these values are shown below.

Older settings are listed here.

Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, below are our default shipping settings:

METAL Reservoir Heads

Default Settings for Reservoir Heads with METAL Reservoirs
Settings EMO, VOL
27:1 Ratio 		VOL
51:1 Ratio 		EMO-XT, KR2, TAM
100:1 		KR2-ST
Super Torque 		EMO-300XT
eXtra Torque
Material
Type Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 1.600
Layer (any) (any) (any) (any) (any)
Temp Info
Print Temp 0 0, 35 35 (varies) 0
Power Factor 100 100 100 100 100
Minimum 0 0 0 0 0
Maximum 0 90 0 / 180 / 270 0 0
Overrides
Pulses / µL 271.9 517 1297 ? ?
Note: Values above in BOLD have been validated through multiple sample testing, July 2020.
Multiplier 1 1 1 ? ?
Prime
Steps 6000 1000 6000 ? ?
Rate 10,000 10,000 10,000 ? ?
Dwell Time (ms) 600 100 600 ?
Unprime
Steps 6000 1000 6000 ? ?
Rate 10,000 10,000 10,000 ? ?
Dwell Time -600 -100 -600 ? ?
Offsets
X 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000
Head Info
Model EMO-25 VOL-25 KR2-15 or TAM-15 (varies) EMO-300XT
PCB Type 4988/160J 4988/160J 4988/160J 4988/160J 4988/160J
RTD Type 1k_PRTD 1k_PRTD 1k_PRTD 1k_PRTD 1k_PRTD
Plot Settings (any) (any) (any) (any) (any)
Motor Settings
Step Mode 16th 16th 16th 16th ?
Motor Current Normal Normal Normal Normal ?
Max Jog Rate 5,000 10,000 15,000 ? ?
Rot Speed 1,500 1,500 10,000 ? ?
Settings EMO, VOL
27:1 Ratio 		VOL
51:1 Ratio 		EMO-XT, KR2, TAM
100:1 		KR2-ST
Super Torque 		EMO-300XT
eXtra Torque

PLASTIC Reservoir Heads: Table 1

Default Settings for Reservoir Heads with PLASTIC Reservoirs - Table 1: Standard Torque, Single Reservoir
Settings SDS 1 ET SDS 5 SDS 10 SDS/HSD/RSD 30 SDS 60
Material
Type Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 1.600
Layer (any) (any) (any) (any) (any)
Temp Info
Print Temp 0 0 0 0 0
Power Factor 100 100 100 100 100
Minimum 0 0 0 0 0
Maximum 0 0 0 0 / 75 / -10 0
Overrides
Pulses / µL 270 87.3 58.7 26.8 17.4
Note: Values above in BOLD have been validated through multiple sample testing, July 2020.
Multiplier 1.000 1.000 1.000 1.000 1.000
Prime
Steps 3000 1500 3000 2250 1500
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms) 300 150 300 225 150
Unprime
Steps 3000 1500 3000 2250 1500
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time -300 -150 -300 -300 -300
Offsets
Clone Head Off Off Off Off Off
X 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000
Head Info
Model SDS SDS-5 SDS-10 SDS-30 / HSD-30 / RSD-30 SDS-60
PCB Type 4988/160J 4988/160J 4988/160J 4988/160J 4988/160J
RTD Type None None None None / 1k_PRTD / 1k_PRTD None
Plot Settings (any) (any) (any) (any) (any)
Motor Settings
Step Mode 16th 16th 16th 16th 16th
Motor Current Normal Normal Normal Normal Normal
Max Jog Rate 10,000 10,000 10,000 10,000 10,000
Rot Speed 1500 1500 1500 1500 1500
Settings SDS 1 ET SDS 5 SDS 10 SDS/HSD/RSD 30 SDS 60

PLASTIC Reservoir Heads: Table 2

Default Settings for Reservoir Heads with PLASTIC Reservoirs - Table 2: Higher Torque and Dual Reservoir
Settings HSD-10-Ardes SDS-30-XT SDS-60-XT SDS-150-XT DSD-50
Material
Type Custom Custom Custom Custom Custom
Color (any) (any) (any) (any) (any)
Nozzle 1.600 1.600 1.600 1.600 4.00
Layer (any) (any) (any) (any) (any)
Temp Info
Print Temp 35 0 0 0 0
Power Factor 100 100 100 100 100
Minimum 0 0 0 0 0
Maximum 75 0 0 0 0
Overrides
Pulses / µL 1800 86 29.1 12.8 20
Note: Values above in BOLD have been validated through multiple sample testing, July 2020.
Multiplier 1.000 1.000 1.000 1.000 1.000
Prime
Steps 9000 1125 1500 1500 1
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time (ms) 900 115 150 150 1
Unprime
Steps 9000 1125 1500 1500 1
Rate 10,000 10,000 10,000 10,000 10,000
Dwell Time -900 -300 -300 -300 -100
Offsets
X 0,000 0,000 0,000 0,000 0,000
Y 0,000 0,000 0,000 0,000 0,000
Z 0,000 0,000 0,000 0,000 0,000
Head Info
Model (varies) (varies) (varies) (varies) (varies)
PCB Type 4988/160J 4988/160J 4988/160J 4988/160J 4988/160J
RTD Type 1k_PLAT_RTD None None None None
Plot Settings (any) (any) (any) (any) (any)
Motor Settings
Step Mode 16th 16th 16th 16th 16th
Motor Current Normal Normal Normal Normal Normal
Max Jog Rate 10,000 10,000 10,000 10,000 10,000
Rot Speed 7,500 1,500 1,500 1,500 1,500
Settings HSD-10-Ardes SDS-30-XT SDS-60-XT SDS-150-XT DSD-50
Retrieved from "https://hyrel3d.in/wiki/index.php?title=Reservoir_Heads&oldid=6270"