Settings

From Hyrel3D
Revision as of 13:29, 29 June 2018 by Davo (talk | contribs)
Jump to navigation Jump to search

Printer Settings

Last, you should (re)load your settings:

Printer settings 3.png

  1. Setings > Printer.
  2. Load Settings from File (find your custom file, or the most recent one named for your model of printer.).
  3. Set or change color selections as desired on the last tab.
  4. Flash Motion Settings.
  5. Apply.
  6. Write to local file with your custom name, as a backup.
  7. OK.

Note that after flashing, or upon startup, you may be required to home the X and Y axes before other moves are allowed.