Settings

From Hyrel3D
Jump to navigation Jump to search

Printer Settings

Last, you should (re)load your settings; there are several screens, detailed below.

To load a configuration file, do the following:

  1. Setings > Printer.
  2. Load Settings from File (find your custom file, or the most recent one named for your model of printer.).
  3. Set or change color selections as desired on the Color tab.
  4. Flash Motion Settings.
  5. Apply.
  6. Write to local file with your custom name, as a backup.
  7. OK.

Note that after flashing, or upon startup, you may be required to home the X and Y axes before other moves are allowed.

Printer

Hardware Setup

Machine I/O

G54 Offsets

Tool Offsets

Fixtures

Color

I/O Pins

Hardware Info

Probe

This page allows you to select rendering colors; you should also check the box for "show print grid" if you want it displayed by default:

Printer settings 3.png

Ecosystem Apps

In Repetrel, go to the Programs tab, and double click in each text field, pointing the applications to their respective executable files under C:/EcosystemApps. See the table below for the proper locations. Note the new location for the Slic3r install; Slic3r Recipes (or Slic3r CFG files) should still be under C:\Users\Hyrel\AppData\Roaming\Slic3r.

EcosystemApps Locations
Program Name Executable Location
Slic3r EXE C:\EcosystemApps\Slic3r\slic3r.exe
Slic3r CFG C:\Users\Hyrel\AppData\Roaming\Slic3r
OpenSCAD C:\EcosystemApps\OpenSCAD\openscad.exe
FreeCAD C:\EcosystemApps\FreeCAD 0.15\bin\FreeCAD.exe
MeshLab C:\EcosystemApps\VCG\MeshLab\meshlab_32.exe
FlatCAM C:\EcosystemApps\FlatCAM\FlatCAM.exe
QCAD C:\EcosystemApps\QCAD\qcad.exe
TeamViewer C:\EcosystemApps\TeamViewer\Version9\TeamViewer.exe
InkScape C:\EcosystemApps\inkscape\inkscape.exe
GIMP C:\EcosystemApps\GIMP 2\bin\gimp-2.8.exe

Note that if your login ID is not "Hyrel", you'll need to adjust the location for the Slic3r cfg file appropriately. Remember to click APPLY when done to cause these settings to be applied.

Head Settings

For Filament-based heads, see the table(s) on our Hot_Flow page.

For Reservoir-based heads, see the table(s) on our Cold_and_Warm_Flow page.