DavidH test

jfjfjh

jhgjhg

Repetrel version 2.855 was released in August, 2015, and is available [here].

test

This describes apaskdasdf spf jsdpfj spfj sfj psfj sdlkfjs lfj slfjs dfljsdfff

For more info, see Test.

kgk

new pdf!

The new pdf is at this location

The new pdf is also at [1]

,bkjgkjghk

• asdlfkjsd
• a'lskdjfsd
  • asdlkfjsd
  • askdjasdf
• lakjfsd

Settings

Some settings for the EMO-Type heads (like temperature, prime/unprime values) will vary, depending on what material you are printing with. Nozzle diameter should accurately reflect what nozzle you have loaded (1.6mm is default) AND what path width you sliced for. Temperature commands will be ignored by heads with no temperature control. Having said that, here are our default shipping settings:

EMO-Type Head Comparison

Settings	EMO, VOL, KRA, COD, VCD, KCD Heads (17mm Tubes, Various Gear Ratios)				SDS, CSD Heads (Various Tube Diameters, Standard Gear Ratios)
	19:1 Ratio	27:1 Ratio	51:1 Ratio	100:1 Ratio	SDS-5	SDS-10	SDS-30	SDS-60
Material
Type	Custom	Custom	Custom	Custom	Custom	Custom	Custom	Custom
Color	(any)	(any)	(any)	(any)	(any)	(any)	(any)	(any)
Nozzle	1.600	1.600	1.600	1.600	1.600	1.600	1.600	1.600
Layer	0.300	0.300	0.300	0.300	0.300	0.300	0.300	0.300
Temp Info
Print Temp	35	35	35	35	0	0	0	0
Power Factor	100	100	100	100	100	100	100	100
Minimum	0	0	0	0	0	0	0	0
Maximum	0/100/200	0/100/200	0/100/200	0/100/200	0	0	0	0
Overrides
Pulses	1.600	2.300	4.700	8.500	0.750	0.580*	0.225	0.150
Feed Rate %	1.000	1.000	1.000	1.000	1.000	1.000	1.000	1.000
Prime Please note that Prime values will vary greatly from those shown, depending on the compressibility of your material.
Steps	600	700	1000	4000	200	200	300	500
Rate	10,000	10,000	10,000	10,000	10,000	10,000	10,000	10,000
Dwell Time (ms)	100	100	110	120	100	100	100	100
Before Tool Change	1	1	1	1	1	1	1	1
Unprime Please note that Unprime values will vary greatly from those shown, depending on the compressibility of your material.
Steps	500	550	800	3500	160	160	225	400
Rate	10,000	10,000	10,000	10,000	10,000	10,000	10,000	10,000
Dwell Time (ms)	100	100	100	110	100	100	100	100
After Tool Change	1	1	1	1	1	1	1	1
Offsets
Clone Head	Off	Off	Off	Off	Off	Off	Off	Off
X	0,000	0,000	0,000	0,000	0,000	0,000	0,000	0,000
Y	0,000	0,000	0,000	0,000	0,000	0,000	0,000	0,000
Z	0,000	0,000	0,000	0,000	0,000	0,000	0,000	0,000
Head Info
Model	(varies)	(varies)	(varies)	(varies)	(varies)	(varies)	(varies)	(varies)
RTD Type	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD	1k PLAT_RTD
Motor Current	High	High	High	High	High	High	High	High
Step Mode	Sixteenth	Sixteenth	Sixteenth	Sixteenth	Sixteenth	Sixteenth	Sixteenth	Sixteenth
* Thanks to Yasmine at VT for the precise calculation.

Repetrel 3D Software Printing Basics

Repetrel is a very robust 3D Printing Software developed by Hyrel. Repetrel is a based on the Repetier platform, has embedded Slic3r software, and we provide in-house recipes to optimize your 3D Printing experience. Our research and testing of how different printing variables affect different materials allows us to provide you with a large number of unique Slic3r Recipes to use based on your needs. You can choose the default recipes we provide and recommend, but you can also create custom recipes based on special or complex build requirements, materials, work environment, etc.

The following two pages detail our naming conventions for different Repetrel Screen areas.

The first diagram begins with the basic:

• Main Top Menu Bar
• Left Side Window
• Right Side Window

The second diagram details out more specific items and areas of the Repetrel Software. The Right Side Working Area Window is where you Open STL and GCode files, Select Recipes and Process STL files for Slicing, ultimately generating your GCode file. You also have options for manipulating your 3D Object with regards to size, position and orientation to the build platform. There are more advanced options on the right side where you can view, search, and edit GCode data instructions.